[U-Boot] [PATCH 3/3] serial: Migrate CONFIG_ARM_DCC to Kconfig

[Alexey Brodkin]

Ooops I meant https://patchwork.ozlabs.org/patch/895969/ here.

This one I guess is for Albert or Michal.

-Alexey

On Mon, 2018-05-28 at 12:33 +0300, Alexey Brodkin wrote:
> Hi gents,
> 
> On Sun, 2018-04-08 at 00:27 +0300, Tuomas Tynkkynen wrote:
> > Signed-off-by: Tuomas Tynkkynen <tuomas at tuxera.com>
> > ---
> >  arch/arm/Kconfig                | 2 ++
> >  drivers/serial/Kconfig          | 5 +++++
> >  include/configs/xilinx_zynqmp.h | 1 -
> >  include/configs/zynq-common.h   | 2 --
> >  scripts/config_whitelist.txt    | 1 -
> >  5 files changed, 7 insertions(+), 4 deletions(-)
> 
> Not sure who's the right person to review and accept this one.
> I'm not the one for sure :)
> 
> -Alexey
> 
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index 190f883aa8..44a4471b47 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -776,6 +776,7 @@ config ARCH_ZYNQ
> >  	select CLK
> >  	select SPL_CLK if SPL
> >  	select CLK_ZYNQ
> > +	imply ARM_DCC
> >  	imply CMD_CLK
> >  	imply FAT_WRITE
> >  	imply CMD_SPL
> > @@ -792,6 +793,7 @@ config ARCH_ZYNQMP
> >  	select SPL_BOARD_INIT if SPL
> >  	select SPL_CLK if SPL
> >  	select DM_USB if USB
> > +	imply ARM_DCC
> >  	imply FAT_WRITE
> >  
> >  config TEGRA
> > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index 9387b642b3..41ce6dec8c 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -432,6 +432,11 @@ config AR933X_UART
> >  	  tree binding to operate, please refer to the document at
> >  	  doc/device-tree-bindings/serial/qca,ar9330-uart.txt.
> >  
> > +config ARM_DCC
> > +	bool "ARM DCC (Debug Communications Channel) serial console support"
> > +	help
> > +	  Select this to enable a serial port using the ARM JTAG DCC port.
> > +
> >  config ATMEL_USART
> >  	bool "Atmel USART support"
> >  	help
> > diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
> > index 8c0b5d9c06..312a2a83ff 100644
> > --- a/include/configs/xilinx_zynqmp.h
> > +++ b/include/configs/xilinx_zynqmp.h
> > @@ -42,7 +42,6 @@
> >  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)
> >  
> >  /* Serial setup */
> > -#define CONFIG_ARM_DCC
> >  #define CONFIG_CPU_ARMV8
> >  
> >  #define CONFIG_SYS_BAUDRATE_TABLE \
> > diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
> > index 554fb66634..699c91d3c5 100644
> > --- a/include/configs/zynq-common.h
> > +++ b/include/configs/zynq-common.h
> > @@ -32,8 +32,6 @@
> >  #define CONFIG_SYS_BAUDRATE_TABLE  \
> >  	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
> >  
> > -#define CONFIG_ARM_DCC
> > -
> >  /* Ethernet driver */
> >  #if defined(CONFIG_ZYNQ_GEM)
> >  # define CONFIG_MII
> > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> > index 30da0122f0..417a978f0a 100644
> > --- a/scripts/config_whitelist.txt
> > +++ b/scripts/config_whitelist.txt
> > @@ -59,7 +59,6 @@ CONFIG_ARMV7_SECURE_MAX_SIZE
> >  CONFIG_ARMV7_SECURE_RESERVE_SIZE
> >  CONFIG_ARMV8_SWITCH_TO_EL1
> >  CONFIG_ARM_ARCH_CP15_ERRATA
> > -CONFIG_ARM_DCC
> >  CONFIG_ARM_FREQ
> >  CONFIG_ARM_GIC_BASE_ADDRESS
> >  CONFIG_ARM_PL180_MMCI_BASE