[U-Boot] [PATCH 3/3] doc: qemu-arm: Drop highmem=off references

Tuomas Tynkkynen tuomas.tynkkynen at iki.fi
Mon May 14 15:47:52 UTC 2018


Now that U-Boot works fine with highmem enabled, there is no need to
tell users to disable highmem.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
---
 doc/README.qemu-arm | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/doc/README.qemu-arm b/doc/README.qemu-arm
index 6f6f07d8bb..260165638a 100644
--- a/doc/README.qemu-arm
+++ b/doc/README.qemu-arm
@@ -39,13 +39,12 @@ Running U-Boot
 The minimal QEMU command line to get U-Boot up and running is:
 
 - For ARM:
-    qemu-system-arm -machine virt,highmem=off -bios u-boot.bin
+    qemu-system-arm -machine virt -bios u-boot.bin
 
 - For AArch64:
-    qemu-system-aarch64 -machine virt,highmem=off -cpu cortex-a57 -bios u-boot.bin
+    qemu-system-aarch64 -machine virt -cpu cortex-a57 -bios u-boot.bin
 
-The 'highmem=off' parameter to the 'virt' machine is required for PCI to work
-in U-Boot. Also, for some odd reason qemu-system-aarch64 needs to be explicitly
+Note that for some odd reason qemu-system-aarch64 needs to be explicitly
 told to use a 64-bit CPU or it will boot in 32-bit mode.
 
 Additional peripherals that have been tested to work in both U-Boot and Linux
-- 
2.16.3



More information about the U-Boot mailing list