[U-Boot] [PATCH v2] board: sun50i: Add Amarula A64 Relic initial support

[Maxime Ripard]

On Fri, May 11, 2018 at 11:17:11AM +0530, Jagan Teki wrote:
> Amarula A64 Relic is A64 based IoT device, which support
> - Allwinner A64 Cortex-A53
> - Mali-400MP2 GPU
> - AXP803 PMIC
> - 1GB DDR3 RAM
> - 8GB eMMC
> - AP6330 Wifi/BLE
> - MIPI-DSI
> - CSI: OV5640 sensor
> - USB OTG
> - 12V DC power supply
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Changes for v2:
> - Rename dts name to sun50i-a64-relic.dts which is simple to use
> - Rename defconfig to a64_relic_defconfig
> - Use licence year as 2018
> 
> Note:
> Maxime, I saw your previous comments about CONFIG_CMD_USB_MASS_STORAGE
> defining in defconfig, may I know why we can't enable it in defconfig file?

If you make a case about why that would be needed, then yes. But since
we have so few boards defining it, and no one really asked for it
either, I'm not sure this belongs in a *default* configuration. We can
definitely make it easier to select in menuconfig if it's harder than
it should be though.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180514/81d8679d/attachment.sig>