[U-Boot] [PATCH v3 01/10] arm: socfpga: misc: Move bridge command to misc common
Ley Foon Tan
ley.foon.tan at intel.com
Wed May 23 16:17:23 UTC 2018
Move bridge command to misc common driver, in preparation to used by
other platforms.
Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
---
arch/arm/mach-socfpga/include/mach/misc.h | 2 +
arch/arm/mach-socfpga/misc.c | 32 +++++++++++++++++++++++++++++
arch/arm/mach-socfpga/misc_gen5.c | 26 ++--------------------
3 files changed, 37 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h
index 197f09a..7fe77ac 100644
--- a/arch/arm/mach-socfpga/include/mach/misc.h
+++ b/arch/arm/mach-socfpga/include/mach/misc.h
@@ -27,4 +27,6 @@ unsigned int shared_uart_com_port(const void *blob);
unsigned int uart_com_port(const void *blob);
#endif
+void do_bridge_reset(int enable);
+
#endif /* _MISC_H_ */
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index fca8650..68eeb29 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -204,3 +204,35 @@ int socfpga_eth_reset_common(void (*resetfn)(const u8 of_reset_id,
return 0;
}
#endif
+
+#ifndef CONFIG_SPL_BUILD
+static int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+
+ argv++;
+
+ switch (*argv[0]) {
+ case 'e': /* Enable */
+ do_bridge_reset(1);
+ break;
+ case 'd': /* Disable */
+ do_bridge_reset(0);
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bridge, 2, 1, do_bridge,
+ "SoCFPGA HPS FPGA bridge control",
+ "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+ "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+ ""
+);
+
+#endif
diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c
index 4343734..848551c 100644
--- a/arch/arm/mach-socfpga/misc_gen5.c
+++ b/arch/arm/mach-socfpga/misc_gen5.c
@@ -259,40 +259,20 @@ static void socfpga_sdram_apply_static_cfg(void)
: : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc");
}
-static int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+void do_bridge_reset(int enable)
{
- if (argc != 2)
- return CMD_RET_USAGE;
-
- argv++;
-
- switch (*argv[0]) {
- case 'e': /* Enable */
+ if (enable) {
writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
socfpga_sdram_apply_static_cfg();
writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst);
writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
writel(iswgrp_handoff[1], &nic301_regs->remap);
- break;
- case 'd': /* Disable */
+ } else {
writel(0, &sysmgr_regs->fpgaintfgrp_module);
writel(0, &sdr_ctrl->fpgaport_rst);
socfpga_sdram_apply_static_cfg();
writel(0, &reset_manager_base->brg_mod_reset);
writel(1, &nic301_regs->remap);
- break;
- default:
- return CMD_RET_USAGE;
}
-
- return 0;
}
-
-U_BOOT_CMD(
- bridge, 2, 1, do_bridge,
- "SoCFPGA HPS FPGA bridge control",
- "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
- "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
- ""
-);
#endif
--
1.7.1
More information about the U-Boot
mailing list