[U-Boot] [PATCH v7 00/11] Add support for DM_USB and DM_USB_DEV for TI's DRA7 EVMs and AM57 EVMs platforms.

[Jean-Jacques Hiblot]

Moving to DM_USB and DM_USB_DEV brings some benefits:
- it is required to support DM_ETH and USB network adapters with the same
  binary.
- support for USB3 on AM57x comes almost for free
- removal of platform code related to USB

Tested on:
- dra76 evm
- AM572 evm

This series applies on top of the series "[PATCH v2 0/7] Improvements for
the dwc3_generic driver"


Changes in v7:
- replace remaining if() statements with ut_assert()
- Fix build issue "multiple definition of `usb_gadget_handle_interrupts'"
- Fixed build issue "multiple definition of `usb_gadget_handle_interrupts'"

Changes in v6:
- ti-pipe3-phy: take PLL out of IDLE in pipe3_init(). The PLL may have
  been put into idle by pipe3_exit()
- DRA7 configs: enable DM_USB and DM_USB_DEV. Use DWC3_GENERIC in place of
DWC3_OF_SIMPLE. disable non DM USB options
- AM57 configs: enable DM_USB and DM_USB_DEV. Use DWC3_GENERIC in place of
DWC3_OF_SIMPLE. disable non DM USB options
- Supports DM USB for peripherals
- Removed DTS changes that disabled USB1 on DRA7 because DM_USB_DEV is
  now supported

Changes in v5:
- Rebased on latest u-boot
- Removed patches that have already been merged

Changes in v4:
- Fix word missing in commit log
- Remove dependency on MISC
- Renamed the commit (DM_USB is already enabled, the only missing option
  is for the USB2 phy driver)
- Remove dependency on MISC
- Remove omap specific glue layer and use dwc3-of-simple glue layer

Changes in v3:
- in syscon_regmap_lookup_by_phandle(), use dev_dbg() instead of printf()
- added unit test for syscon_regmap_lookup_by_phandle()

Changes in v2:
- Add USB3 support to ti-pipe3-phy driver
- omap-usb2-phy: Implement power_on and power_off callbacks
- am57xx boards: when DM_USB is used, turn on the required USB clocks
- split dts changes in 2 commits: one for binding the children of
  ocp2scp at 4a080000, and one to disable USB1  on all DRA7 EVMs
- Enable DM_USB in am57xx_evm_defconfig. USB3 (super speed) is supported.

Jean-Jacques Hiblot (9):
  syscon: dm: Add a new method to get a regmap from DTS
  phy: Add a new driver for OMAP's USB2 PHYs
  dwc3-generic: Add support for the TI DWC3 glue
  board: ti: dra7xx-evm: turn on USB clocks in late init stage
  dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus
  configs: enable DM_USB and DM_USB_DEV for all DRA7 platforms
  configs: am57xx_evm: Enable DM_USB and DM_USB_DEV
  board: ti: dra7-evm: remove USB platform code
  board: ti: am57xx: remove USB platform code

Vignesh R (2):
  phy: ti-pip3-phy: Add support for USB3 PHY
  board; ti: am57xx: turn on USB clocks

 arch/arm/dts/omap5-u-boot.dtsi  |   4 +
 arch/sandbox/dts/test.dts       |   6 +-
 board/ti/am57xx/board.c         | 106 ++++------------------
 board/ti/dra7xx/evm.c           | 123 ++++---------------------
 configs/am57xx_evm_defconfig    |  10 +-
 configs/am57xx_hs_evm_defconfig |  10 +-
 configs/dra7xx_evm_defconfig    |   8 +-
 configs/dra7xx_hs_evm_defconfig |   8 +-
 drivers/core/syscon-uclass.c    |  23 +++++
 drivers/phy/Kconfig             |   8 ++
 drivers/phy/Makefile            |   1 +
 drivers/phy/omap-usb2-phy.c     | 196 ++++++++++++++++++++++++++++++++++++++++
 drivers/phy/ti-pipe3-phy.c      |  32 +++++--
 drivers/usb/dwc3/dwc3-generic.c |  85 +++++++++++++++++
 include/syscon.h                |  13 +++
 test/dm/syscon.c                |  29 ++++++
 16 files changed, 447 insertions(+), 215 deletions(-)
 create mode 100644 drivers/phy/omap-usb2-phy.c

-- 
2.7.4