[U-Boot] [PATCH v2 05/11] pmic: dm: Add support for MC34708 for PMIC DM

[Lukasz Majewski]

On Mon, 14 May 2018 08:01:45 +1000
Simon Glass <sjg at chromium.org> wrote:

> Hi Lukasz,
> 
> On 7 May 2018 at 06:26, Lukasz Majewski <lukma at denx.de> wrote:
> > This patch adds support for MC34708 PMIC, to be used with driver
> > model (DM).
> >
> > Signed-off-by: Lukasz Majewski <lukma at denx.de>
> >
> > ---
> >
> > Changes in v2:
> > - Support for uclass private data with trasfer length
> >
> >  drivers/power/pmic/Kconfig   |   7 +++
> >  drivers/power/pmic/Makefile  |   1 +
> >  drivers/power/pmic/mc34708.c | 101
> > +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 109
> > insertions(+) create mode 100644 drivers/power/pmic/mc34708.c
> >
> > diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> > index 40ab9f7fa5..d504c28b77 100644
> > --- a/drivers/power/pmic/Kconfig
> > +++ b/drivers/power/pmic/Kconfig
> > @@ -69,6 +69,13 @@ config DM_PMIC_MAX8998
> >         This config enables implementation of driver-model pmic
> > uclass features for PMIC MAX8998. The driver implements read/write
> > operations.
> >
> > +config DM_PMIC_MC34708
> > +       bool "Enable Driver Model for PMIC MC34708"
> > +       depends on DM_PMIC
> > +       help
> > +        This config enables implementation of driver-model pmic
> > uclass features
> > +        for PMIC MC34708. The driver implements read/write
> > operations. +
> >  config PMIC_MAX8997
> >         bool "Enable Driver Model for PMIC MAX8997"
> >         depends on DM_PMIC
> > diff --git a/drivers/power/pmic/Makefile
> > b/drivers/power/pmic/Makefile index ad32068b3a..418b5e7aee 100644
> > --- a/drivers/power/pmic/Makefile
> > +++ b/drivers/power/pmic/Makefile
> > @@ -8,6 +8,7 @@
> >  obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
> >  obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
> >  obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
> > +obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
> >  obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
> >  obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
> >  obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
> > diff --git a/drivers/power/pmic/mc34708.c
> > b/drivers/power/pmic/mc34708.c new file mode 100644
> > index 0000000000..d9d1a41802
> > --- /dev/null
> > +++ b/drivers/power/pmic/mc34708.c
> > @@ -0,0 +1,101 @@
> > +/*
> > + * Copyright (C) 2018
> > + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
> > + *
> > + * SPDX-License-Identifier:    GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <dm.h>
> > +#include <errno.h>
> > +#include <i2c.h>
> > +#include <power/pmic.h>  
> 
> should be at end
> 
> > +#include <fsl_pmic.h>  
> 
> should be above i2c.h
> 
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +static int mc34708_reg_count(struct udevice *dev)
> > +{
> > +       return PMIC_NUM_OF_REGS;
> > +}
> > +
> > +static int mc34708_write(struct udevice *dev, uint reg, const u8
> > *buff,
> > +                        int len)
> > +{
> > +       u8 buf[3] = { 0 };
> > +       int ret;
> > +
> > +       if (len != MC34708_TRANSFER_SIZE)
> > +               return -EINVAL;
> > +
> > +       buf[0] = buff[2];
> > +       buf[1] = buff[1];
> > +       buf[2] = buff[0];  
> 
> What is going on here? It deserves a comment at least.

This is the data endianess conversion for this chip (as described in
earlier reply). The upper layer (pmic-uclass) will receive data
formatted in little endian.

This unification can be leveraged with pmic_read/write generic
functions (as it is done latter).

> 
> > +
> > +       ret = dm_i2c_write(dev, reg, buf, len);
> > +       if (ret)
> > +               printf("write error to device: %p register: %#x!",
> > dev, reg); +
> > +       return ret;
> > +}
> > +  
> 
> Regards,
> Simon




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180514/84d8b060/attachment.sig>