[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Michal Simek]

Hi Jaehoon,

On 2.5.2018 04:05, Jaehoon Chung wrote:
> On 04/30/2018 06:02 PM, Michal Simek wrote:
>> Hi Tom,
>>
>> On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote:
>>> This patch series is meant to add SD3.0 support for ZynqMP
>>> platform.
>>> The first five patches in the series mostly setting up
>>> things in sdhci layer to support SD3.0 , the sixth patch
>>> is to add SD3.0 support for ZynqMP platform and the last
>>> patch is to enable this support for ZynqMP zcu102 rev1.0
>>> eval board.
>>>
>>> Siva Durga Prasad Paladugu (7):
>>>   mmc: sdhci: Add support for disabling clock
>>>   mmc: sdhci: Handle execute tuning command in sdhci_send_command
>>>   sdhci: Add new sdhci ops for platform specific tuning and delays
>>>   mmc: sdhci: Invoke platform specific tuning and delay routines
>>>   mmc : sdhci: Read capabilities register1 and update host caps
>>>   mmc: zynq_sdhci: Add support for SD3.0
>>>   zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
>>>
>>>  board/xilinx/zynqmp/Makefile                  |   2 +
>>>  board/xilinx/zynqmp/tap_delays.c              | 229 +++++++++++++++++++++++++
>>>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
>>>  drivers/mmc/sdhci.c                           |  63 ++++++-
>>>  drivers/mmc/zynq_sdhci.c                      | 231 +++++++++++++++++++++++++-
>>>  include/sdhci.h                               |   8 +
>>>  include/zynqmp_tap_delay.h                    |  20 +++
>>>  7 files changed, 547 insertions(+), 8 deletions(-)
>>>  create mode 100644 board/xilinx/zynqmp/tap_delays.c
>>>  create mode 100644 include/zynqmp_tap_delay.h
>>>
>>
>> It looks like that Jaehoon is out or busy with something else. Can you
>> please recommend someone to take a look at these patches? Definitely
>> feel free to look at it self.
> 
> Sorry. First, I checked the patches that delegate to me on patchwork.
> So I missed this patchset. I will check this on Today.

It looks like that Today wasn't really Today.
Anyway giving you one more day and then will apply it via my tree.

Thanks,
Michal