[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Jaehoon Chung]

On 04/30/2018 06:02 PM, Michal Simek wrote:
> Hi Tom,
> 
> On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote:
>> This patch series is meant to add SD3.0 support for ZynqMP
>> platform.
>> The first five patches in the series mostly setting up
>> things in sdhci layer to support SD3.0 , the sixth patch
>> is to add SD3.0 support for ZynqMP platform and the last
>> patch is to enable this support for ZynqMP zcu102 rev1.0
>> eval board.
>>
>> Siva Durga Prasad Paladugu (7):
>>   mmc: sdhci: Add support for disabling clock
>>   mmc: sdhci: Handle execute tuning command in sdhci_send_command
>>   sdhci: Add new sdhci ops for platform specific tuning and delays
>>   mmc: sdhci: Invoke platform specific tuning and delay routines
>>   mmc : sdhci: Read capabilities register1 and update host caps
>>   mmc: zynq_sdhci: Add support for SD3.0
>>   zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
>>
>>  board/xilinx/zynqmp/Makefile                  |   2 +
>>  board/xilinx/zynqmp/tap_delays.c              | 229 +++++++++++++++++++++++++
>>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
>>  drivers/mmc/sdhci.c                           |  63 ++++++-
>>  drivers/mmc/zynq_sdhci.c                      | 231 +++++++++++++++++++++++++-
>>  include/sdhci.h                               |   8 +
>>  include/zynqmp_tap_delay.h                    |  20 +++
>>  7 files changed, 547 insertions(+), 8 deletions(-)
>>  create mode 100644 board/xilinx/zynqmp/tap_delays.c
>>  create mode 100644 include/zynqmp_tap_delay.h
>>
> 
> It looks like that Jaehoon is out or busy with something else. Can you
> please recommend someone to take a look at these patches? Definitely
> feel free to look at it self.

Sorry. First, I checked the patches that delegate to me on patchwork.
So I missed this patchset. I will check this on Today.

Best Regards,
Jaehoon Chung

> 
> Thanks,
> Michal
> 
> 
>