[U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Michal Simek]

On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote:
> This patch series is meant to add SD3.0 support for ZynqMP
> platform.
> The first five patches in the series mostly setting up
> things in sdhci layer to support SD3.0 , the sixth patch
> is to add SD3.0 support for ZynqMP platform and the last
> patch is to enable this support for ZynqMP zcu102 rev1.0
> eval board.
> 
> Siva Durga Prasad Paladugu (7):
>   mmc: sdhci: Add support for disabling clock
>   mmc: sdhci: Handle execute tuning command in sdhci_send_command
>   sdhci: Add new sdhci ops for platform specific tuning and delays
>   mmc: sdhci: Invoke platform specific tuning and delay routines
>   mmc : sdhci: Read capabilities register1 and update host caps
>   mmc: zynq_sdhci: Add support for SD3.0
>   zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
> 
>  board/xilinx/zynqmp/Makefile                  |   2 +
>  board/xilinx/zynqmp/tap_delays.c              | 229 +++++++++++++++++++++++++
>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
>  drivers/mmc/sdhci.c                           |  63 ++++++-
>  drivers/mmc/zynq_sdhci.c                      | 231 +++++++++++++++++++++++++-
>  include/sdhci.h                               |   8 +
>  include/zynqmp_tap_delay.h                    |  20 +++
>  7 files changed, 547 insertions(+), 8 deletions(-)
>  create mode 100644 board/xilinx/zynqmp/tap_delays.c
>  create mode 100644 include/zynqmp_tap_delay.h
> 

Applied to xilinx tree.

Thanks,
Michal