[U-Boot] [PATCH v3 2/3] serial: ns16550: Add reset ctrl to driver

[Ley Foon Tan]

On Tue, May 8, 2018 at 11:19 AM, Ley Foon Tan <ley.foon.tan at intel.com> wrote:
> Add code to reset all reset signals as in serial DT node. A reset property is an optional feature,
> so do not fail if a reset property is not present.
>
> If a reset property is discovered, then use it to deassert, thus bringing the
> IP out of reset.
>
> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
> Reviewed-by: Marek Vasut <marex at denx.de>
> ---
>  drivers/serial/ns16550.c |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index 53550bf..9c80090 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -9,6 +9,7 @@
>  #include <dm.h>
>  #include <errno.h>
>  #include <ns16550.h>
> +#include <reset.h>
>  #include <serial.h>
>  #include <watchdog.h>
>  #include <linux/types.h>
> @@ -177,6 +178,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
>  #if defined(CONFIG_ARCH_OMAP2PLUS)
>         serial_out(0x7, &com_port->mdr1);       /* mode select reset TL16C750*/
>  #endif
> +
>         serial_out(UART_MCRVAL, &com_port->mcr);
>         serial_out(ns16550_getfcr(com_port), &com_port->fcr);
>         if (baud_divisor != -1)
> @@ -370,6 +372,12 @@ static int ns16550_serial_setbrg(struct udevice *dev, int baudrate)
>  int ns16550_serial_probe(struct udevice *dev)
>  {
>         struct NS16550 *const com_port = dev_get_priv(dev);
> +       struct reset_ctl_bulk reset_bulk;
> +       int ret;
> +
> +       ret = reset_get_bulk(dev, &reset_bulk);
> +       if (!ret)
> +               reset_deassert_bulk(&reset_bulk);
>
>         com_port->plat = dev_get_platdata(dev);
>         NS16550_init(com_port, -1);
> --
> 1.7.1
>

Hi Tom

Can you help to merge this patch if okay with this patch?

Regards
Ley Foon