[U-Boot] [PATCH 2/6] ARM: kirkwood: Add device-tree for dreamplug

[Chris Packham]

Import the dts file from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 arch/arm/dts/kirkwood-dreamplug.dts | 127 ++++++++++++++++++++++++++++
 configs/dreamplug_defconfig         |   3 +-
 2 files changed, 129 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/kirkwood-dreamplug.dts

diff --git a/arch/arm/dts/kirkwood-dreamplug.dts b/arch/arm/dts/kirkwood-dreamplug.dts
new file mode 100644
index 000000000000..a647a65c20a0
--- /dev/null
+++ b/arch/arm/dts/kirkwood-dreamplug.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Dreamplug";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp at f1000000 {
+		pinctrl: pin-controller at 10000 {
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial at 12000 {
+			status = "ok";
+		};
+
+		spi at 10600 {
+			status = "okay";
+
+			m25p40 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l1606e", "jedec,spi-nor", "spi-flash";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition at 0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition at 100000 {
+					reg = <0x100000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition at 180000 {
+					reg = <0x180000 0x10000>;
+					label = "dtb";
+				};
+			};
+		};
+
+		sata at 80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		mvsdio at 90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
+			     &pmx_led_wifi_ap >;
+		pinctrl-names = "default";
+
+		bluetooth {
+			label = "dreamplug:blue:bluetooth";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wifi {
+			label = "dreamplug:green:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wifi-ap {
+			label = "dreamplug:green:wifi_ap";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy at 0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy at 1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port at 0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port at 0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
index cbd2fb68ad92..8090c9a37793 100644
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
 CONFIG_SYS_TEXT_BASE=0x600000
 CONFIG_TARGET_DREAMPLUG=y
 CONFIG_IDENT_STRING="\nMarvell-DreamPlug"
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dreamplug"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
@@ -19,6 +20,7 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_MVSATA_IDE=y
 # CONFIG_MMC is not set
@@ -32,4 +34,3 @@ CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-- 
2.17.0