[U-Boot] [PATCH 3/4] usb: xhci: Fix config fail of FS hub behind a HS hub with MTT

[Bin Meng]

If a full speed hub connects to a high speed hub which supports MTT,
the MTT field of its slot context will be set to 1 when xHCI driver
setups an xHCI virtual device in xhci_setup_addressable_virt_dev().
Once usb core fetch its hub descriptor, and need to update the xHC's
internal data structures for the device, the HUB field of its slot
context will be set to 1 too, meanwhile MTT is also set before, this
will cause configure endpoint command fail. In the case, we should
clear MTT to 0 for full speed hub according to section 6.2.2.

This keeps in sync with Linux kernel commit:
  096b110: usb: xhci: fix config fail of FS hub behind a HS hub with MTT

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 drivers/usb/host/xhci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8c1126e..f9c6bbb 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1435,8 +1435,15 @@ static int xhci_update_hub_device(struct udevice *dev, struct usb_device *udev)
 
 	/* Update hub related fields */
 	slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
-	if (hub->tt.multi && udev->speed == USB_SPEED_HIGH)
+	/*
+	 * refer to section 6.2.2: MTT should be 0 for full speed hub,
+	 * but it may be already set to 1 when setup an xHCI virtual
+	 * device, so clear it anyway.
+	 */
+	if (hub->tt.multi)
 		slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+	else if (udev->speed == USB_SPEED_FULL)
+		slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT);
 	slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(udev->maxchild));
 	/*
 	 * Set TT think time - convert from ns to FS bit times.
-- 
2.7.4