[U-Boot] [PATCH 2/2] mvebu: turris_omnia: add note about i2c slave disable

Baruch Siach baruch at tkos.co.il
Tue May 29 04:45:33 UTC 2018


Code that disables the i2c slave is now in the mvtwsi i2c driver.
Platform must enable DM_I2C to use that code. Add a comment in the code
as a reminder for the planned DM_I2C migration of Turris Omnia.

Reviewed-by: Heiko Schocher <hs at denx.de>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
v2: Add Reviewed-by from Heiko
---
 board/CZ.NIC/turris_omnia/turris_omnia.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index da663cf1bb0c..160d30cd795a 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -321,7 +321,11 @@ int board_early_init_f(void)
 	writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
 	writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
 
-	/* Disable I2C debug mode blocking 0x64 I2C address */
+	/*
+	 * Disable I2C debug mode blocking 0x64 I2C address.
+	 * Note: that would be redundant once Turris Omnia migrates to DM_I2C,
+	 * because the mvtwsi driver includes equivalent code.
+	 */
 	i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
 	i2c_debug_reg &= ~(1<<18);
 	writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
-- 
2.17.0



More information about the U-Boot mailing list