[U-Boot] [PATCH 3/4] configs: nx25-ae250:Rename as ax25-ae350
Andes
uboot at andestech.com
Tue May 22 08:08:13 UTC 2018
From: Rick Chen <rick at andestech.com>
Rename
nx25 as ax25
ae250 as ae350
nx25-ae250 as ax25-ae350
including filename, variable, string and definition.
Signed-off-by: Rick Chen <rick at andestech.com>
Signed-off-by: Rick Chen <rickchen36 at gmail.com>
Cc: Greentime Hu <green.hu at gmail.com>
---
configs/ax25-ae350_defconfig | 40 ++++++++++++++
configs/nx25-ae250_defconfig | 40 --------------
include/configs/ax25-ae350.h | 125 +++++++++++++++++++++++++++++++++++++++++++
include/configs/nx25-ae250.h | 125 -------------------------------------------
4 files changed, 165 insertions(+), 165 deletions(-)
create mode 100644 configs/ax25-ae350_defconfig
delete mode 100644 configs/nx25-ae250_defconfig
create mode 100644 include/configs/ax25-ae350.h
delete mode 100644 include/configs/nx25-ae250.h
diff --git a/configs/ax25-ae350_defconfig b/configs/ax25-ae350_defconfig
new file mode 100644
index 0000000..4caee50
--- /dev/null
+++ b/configs/ax25-ae350_defconfig
@@ -0,0 +1,40 @@
+CONFIG_RISCV=y
+CONFIG_SYS_TEXT_BASE=0x00000000
+CONFIG_DEFAULT_DEVICE_TREE="ae350"
+CONFIG_TARGET_AX25_AE350=y
+CONFIG_FIT=y
+CONFIG_BOOTDELAY=3
+# CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PROMPT="RISC-V # "
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SF_TEST=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_BOARD=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_MMC=y
+CONFIG_DM_MMC=y
+CONFIG_FTSDC010=y
+CONFIG_FTSDC010_SDIO=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_DM_ETH=y
+CONFIG_FTMAC100=y
+CONFIG_BAUDRATE=38400
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_ATCSPI200_SPI=y
+CONFIG_TIMER=y
+CONFIG_ATCPIT100_TIMER=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/nx25-ae250_defconfig b/configs/nx25-ae250_defconfig
deleted file mode 100644
index 4370832..0000000
--- a/configs/nx25-ae250_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_RISCV=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_DEFAULT_DEVICE_TREE="ae250"
-CONFIG_TARGET_NX25_AE250=y
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="RISC-V # "
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SF_TEST=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_OF_CONTROL=y
-CONFIG_OF_BOARD=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
-CONFIG_CLK=y
-CONFIG_MMC=y
-CONFIG_DM_MMC=y
-CONFIG_FTSDC010=y
-CONFIG_FTSDC010_SDIO=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_DM_ETH=y
-CONFIG_FTMAC100=y
-CONFIG_BAUDRATE=38400
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_DM_SPI=y
-CONFIG_ATCSPI200_SPI=y
-CONFIG_TIMER=y
-CONFIG_ATCPIT100_TIMER=y
-CONFIG_DISTRO_DEFAULTS=y
diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
new file mode 100644
index 0000000..a90c75a
--- /dev/null
+++ b/include/configs/ax25-ae350.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2017 Andes Technology Corporation
+ * Rick Chen, Andes Technology Corporation <rick at andestech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * CPU and Board Configuration Options
+ */
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_SERVERIP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+/*
+ * Print Buffer Size
+ */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/*
+ * max number of command args
+ */
+#define CONFIG_SYS_MAXARGS 16
+
+/*
+ * Boot Argument Buffer Size
+ */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/*
+ * Size of malloc() pool
+ * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough
+ */
+#define CONFIG_SYS_MALLOC_LEN (512 << 10)
+
+/* DT blob (fdt) address */
+#define CONFIG_SYS_FDT_BASE 0x000f0000
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1 \
+ (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
+#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
+#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#endif
+#define CONFIG_SYS_NS16550_CLK 19660800
+
+/* Init Stack Pointer */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
+ GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Load address and memory test area should agree with
+ * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself.
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* SDRAM */
+
+/*
+ * memtest works on 512 MB in DRAM
+ */
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
+
+/* environments */
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 50000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_ENV_OVERWRITE
+
+/* SPI FLASH */
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED 1000000
+#define CONFIG_SF_DEFAULT_MODE 0
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+
+/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
+/* Increase max gunzip size */
+#define CONFIG_SYS_BOOTM_LEN (64 << 20)
+
+/* When we use RAM as ENV */
+#define CONFIG_ENV_SIZE 0x2000
+
+/* Enable distro boot */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr_r=0x00080000\0" \
+ "pxefile_addr_r=0x01f00000\0" \
+ "scriptaddr=0x01f00000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02800000\0" \
+ BOOTENV
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/nx25-ae250.h b/include/configs/nx25-ae250.h
deleted file mode 100644
index a90c75a..0000000
--- a/include/configs/nx25-ae250.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2017 Andes Technology Corporation
- * Rick Chen, Andes Technology Corporation <rick at andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_SERVERIP
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
-/*
- * Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/*
- * max number of command args
- */
-#define CONFIG_SYS_MAXARGS 16
-
-/*
- * Boot Argument Buffer Size
- */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough
- */
-#define CONFIG_SYS_MALLOC_LEN (512 << 10)
-
-/* DT blob (fdt) address */
-#define CONFIG_SYS_FDT_BASE 0x000f0000
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1 \
- (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
-#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
-
-/*
- * Serial console configuration
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#endif
-#define CONFIG_SYS_NS16550_CLK 19660800
-
-/* Init Stack Pointer */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
- GENERATED_GBL_DATA_SIZE)
-
-/*
- * Load address and memory test area should agree with
- * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* SDRAM */
-
-/*
- * memtest works on 512 MB in DRAM
- */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
-
-/* environments */
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 50000000
-#define CONFIG_ENV_SPI_MODE 0
-#define CONFIG_ENV_SECT_SIZE 0x1000
-#define CONFIG_ENV_OVERWRITE
-
-/* SPI FLASH */
-#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 1000000
-#define CONFIG_SF_DEFAULT_MODE 0
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 16 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-
-/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
-/* Increase max gunzip size */
-#define CONFIG_SYS_BOOTM_LEN (64 << 20)
-
-/* When we use RAM as ENV */
-#define CONFIG_ENV_SIZE 0x2000
-
-/* Enable distro boot */
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr_r=0x00080000\0" \
- "pxefile_addr_r=0x01f00000\0" \
- "scriptaddr=0x01f00000\0" \
- "fdt_addr_r=0x02000000\0" \
- "ramdisk_addr_r=0x02800000\0" \
- BOOTENV
-
-#endif /* __CONFIG_H */
--
2.7.4
More information about the U-Boot
mailing list