[U-Boot] [PATCH 4/7] mach-snapdragon: Fix UART clock flow
Ramon Fried
ramon.fried at gmail.com
Sat May 12 10:15:55 UTC 2018
UART clock enabling flow was wrong.
Changed the flow according to downstream implementation in LK.
Signed-off-by: Ramon Fried <ramon.fried at gmail.com>
---
arch/arm/mach-snapdragon/clock-apq8016.c | 23 +++++++++++++++-------
arch/arm/mach-snapdragon/clock-apq8096.c | 4 ++--
arch/arm/mach-snapdragon/clock-snapdragon.c | 17 +++++++++++++++-
arch/arm/mach-snapdragon/clock-snapdragon.h | 9 +++++++--
.../mach-snapdragon/include/mach/sysmap-apq8016.h | 1 +
5 files changed, 42 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-snapdragon/clock-apq8016.c b/arch/arm/mach-snapdragon/clock-apq8016.c
index 9c0cc1c22c..6e4a0ccb90 100644
--- a/arch/arm/mach-snapdragon/clock-apq8016.c
+++ b/arch/arm/mach-snapdragon/clock-apq8016.c
@@ -17,7 +17,6 @@
/* GPLL0 clock control registers */
#define GPLL0_STATUS_ACTIVE BIT(17)
-#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
static const struct bcr_regs sdc_regs[] = {
{
@@ -36,11 +35,17 @@ static const struct bcr_regs sdc_regs[] = {
}
};
-static struct gpll0_ctrl gpll0_ctrl = {
+static struct pll_vote_clk gpll0_vote_clk = {
.status = GPLL0_STATUS,
.status_bit = GPLL0_STATUS_ACTIVE,
.ena_vote = APCS_GPLL_ENA_VOTE,
- .vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
+ .vote_bit = BIT(0),
+};
+
+static struct vote_clk gcc_blsp1_ahb_clk = {
+ .cbcr_reg = BLSP1_AHB_CBCR,
+ .ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE,
+ .vote_bit = BIT(10),
};
/* SDHCI */
@@ -55,7 +60,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
/* 800Mhz/div, gpll0 */
clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
CFG_CLK_SRC_GPLL0);
- clk_enable_gpll0(priv->base, &gpll0_ctrl);
+ clk_enable_gpll0(priv->base, &gpll0_vote_clk);
clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
return rate;
@@ -72,12 +77,16 @@ static const struct bcr_regs uart2_regs = {
/* UART: 115200 */
static int clk_init_uart(struct msm_clk_priv *priv)
{
- /* Enable iface clk */
- clk_enable_cbc(priv->base + BLSP1_AHB_CBCR);
+ /* Enable AHB clock */
+ clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk);
+
/* 7372800 uart block clock @ GPLL0 */
clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
CFG_CLK_SRC_GPLL0);
- clk_enable_gpll0(priv->base, &gpll0_ctrl);
+
+ /* Vote for gpll0 clock */
+ clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+
/* Enable core clk */
clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
diff --git a/arch/arm/mach-snapdragon/clock-apq8096.c b/arch/arm/mach-snapdragon/clock-apq8096.c
index 008649a4c6..628c38785b 100644
--- a/arch/arm/mach-snapdragon/clock-apq8096.c
+++ b/arch/arm/mach-snapdragon/clock-apq8096.c
@@ -27,7 +27,7 @@ static const struct bcr_regs sdc_regs = {
.D = SDCC2_D,
};
-static const struct gpll0_ctrl gpll0_ctrl = {
+static const struct pll_vote_clk gpll0_vote_clk = {
.status = GPLL0_STATUS,
.status_bit = GPLL0_STATUS_ACTIVE,
.ena_vote = APCS_GPLL_ENA_VOTE,
@@ -41,7 +41,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
CFG_CLK_SRC_GPLL0);
- clk_enable_gpll0(priv->base, &gpll0_ctrl);
+ clk_enable_gpll0(priv->base, &gpll0_vote_clk);
clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
return rate;
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c b/arch/arm/mach-snapdragon/clock-snapdragon.c
index f738f57043..85526186c6 100644
--- a/arch/arm/mach-snapdragon/clock-snapdragon.c
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.c
@@ -30,7 +30,7 @@ void clk_enable_cbc(phys_addr_t cbcr)
;
}
-void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0)
+void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0)
{
if (readl(base + gpll0->status) & gpll0->status_bit)
return; /* clock already enabled */
@@ -41,6 +41,21 @@ void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0)
;
}
+#define BRANCH_ON_VAL (0)
+#define BRANCH_NOC_FSM_ON_VAL BIT(29)
+#define BRANCH_CHECK_MASK GENMASK(31, 28)
+
+void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk)
+{
+ u32 val;
+
+ setbits_le32(base + vclk->ena_vote, vclk->vote_bit);
+ do {
+ val = readl(base + vclk->cbcr_reg);
+ val &= BRANCH_CHECK_MASK;
+ } while ((val != BRANCH_ON_VAL) && (val != BRANCH_NOC_FSM_ON_VAL));
+}
+
#define APPS_CMD_RGCR_UPDATE BIT(0)
/* Update clock command via CMD_RGCR */
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.h b/arch/arm/mach-snapdragon/clock-snapdragon.h
index 2cff4f8a06..3ae21099c2 100644
--- a/arch/arm/mach-snapdragon/clock-snapdragon.h
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.h
@@ -11,13 +11,18 @@
#define CFG_CLK_SRC_GPLL0 (1 << 8)
#define CFG_CLK_SRC_MASK (7 << 8)
-struct gpll0_ctrl {
+struct pll_vote_clk {
uintptr_t status;
int status_bit;
uintptr_t ena_vote;
int vote_bit;
};
+struct vote_clk {
+ uintptr_t cbcr_reg;
+ uintptr_t ena_vote;
+ int vote_bit;
+};
struct bcr_regs {
uintptr_t cfg_rcgr;
uintptr_t cmd_rcgr;
@@ -30,7 +35,7 @@ struct msm_clk_priv {
phys_addr_t base;
};
-void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *pll0);
+void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0);
void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
void clk_enable_cbc(phys_addr_t cbcr);
void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
index ae784387fa..520e2e6bd7 100644
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
+++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
@@ -13,6 +13,7 @@
/* Clocks: (from CLK_CTL_BASE) */
#define GPLL0_STATUS (0x2101C)
#define APCS_GPLL_ENA_VOTE (0x45000)
+#define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004)
#define SDCC_BCR(n) ((n * 0x1000) + 0x41000)
#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)
--
2.14.1
More information about the U-Boot
mailing list