[U-Boot] [PATCH 1/2] mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.

Magnus Lilja lilja.magnus at gmail.com
Fri May 11 12:06:54 UTC 2018


Move CONFIG_MX31 from mx31pdk.h to mx31pdk_defconfig and introduce
necessary Kconfig changes as well.

Signed-off-by: Magnus Lilja <lilja.magnus at gmail.com>
---
 arch/arm/Kconfig              | 14 ++++++--------
 arch/arm/mach-imx/mx3/Kconfig | 20 ++++++++++++++++++++
 configs/mx31pdk_defconfig     |  3 ++-
 include/configs/mx31pdk.h     |  2 --
 4 files changed, 28 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/mach-imx/mx3/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2bbb86c462..1645add855 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -497,13 +497,6 @@ config TARGET_X600
 	select SUPPORT_SPL
 	select PL011_SERIAL
 
-config TARGET_MX31PDK
-	bool "Support mx31pdk"
-	select BOARD_LATE_INIT
-	select CPU_ARM1136
-	select SUPPORT_SPL
-	select BOARD_EARLY_INIT_F
-
 config TARGET_WOODBURN
 	bool "Support woodburn"
 	select CPU_ARM1136
@@ -665,6 +658,10 @@ config ARCH_MX28
 	select PL011_SERIAL
 	select SUPPORT_SPL
 
+config ARCH_MX31
+	bool "NXP i.MX31 family"
+	select CPU_ARM1136
+
 config ARCH_MX7ULP
         bool "NXP MX7ULP"
 	select CPU_V7A
@@ -1296,6 +1293,8 @@ source "arch/arm/cpu/armv7/ls102xa/Kconfig"
 
 source "arch/arm/mach-imx/mx2/Kconfig"
 
+source "arch/arm/mach-imx/mx3/Kconfig"
+
 source "arch/arm/mach-imx/mx5/Kconfig"
 
 source "arch/arm/mach-imx/mx6/Kconfig"
@@ -1381,7 +1380,6 @@ source "board/freescale/ls1046ardb/Kconfig"
 source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
-source "board/freescale/mx31pdk/Kconfig"
 source "board/freescale/mx35pdk/Kconfig"
 source "board/freescale/s32v234evb/Kconfig"
 source "board/gdsys/a38x/Kconfig"
diff --git a/arch/arm/mach-imx/mx3/Kconfig b/arch/arm/mach-imx/mx3/Kconfig
new file mode 100644
index 0000000000..bf6a1c6927
--- /dev/null
+++ b/arch/arm/mach-imx/mx3/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_MX31
+
+config MX31
+       bool
+       default y
+choice
+	prompt "MX31 board select"
+	optional
+
+config TARGET_MX31PDK
+	bool "Support the i.MX31 PDK board from Freescale/NXP"
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+	select BOARD_EARLY_INIT_F
+
+endchoice
+
+source "board/freescale/mx31pdk/Kconfig"
+
+endif
diff --git a/configs/mx31pdk_defconfig b/configs/mx31pdk_defconfig
index 0f78a63762..037e250e96 100644
--- a/configs/mx31pdk_defconfig
+++ b/configs/mx31pdk_defconfig
@@ -1,9 +1,10 @@
 CONFIG_ARM=y
 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
-CONFIG_TARGET_MX31PDK=y
+CONFIG_ARCH_MX31=y
 CONFIG_SYS_TEXT_BASE=0x87e00000
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_MX31PDK=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL=y
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 583892fed2..3ec3126233 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -16,8 +16,6 @@
 #include <asm/arch/imx-regs.h>
 
 /* High Level Configuration Options */
-#define CONFIG_MX31			/* This is a mx31 */
-
 #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-- 
2.17.0



More information about the U-Boot mailing list