[U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64

Vasily Khoruzhick anarsoul at gmail.com
Thu May 31 04:01:07 UTC 2018


On Tue, May 29, 2018 at 8:20 AM, Vasily Khoruzhick <anarsoul at gmail.com> wrote:
> On Mon, May 28, 2018 at 10:04 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>> On Mon, May 28, 2018 at 11:13 PM, Vasily Khoruzhick <anarsoul at gmail.com> wrote:
>>> You need both patches in order for it to work.
>>>
>>> I tested these patches on Pinebook and Pine64 LTS, both were able to
>>> boot from eMMC. What board are you using?
>>
>> Did you test BPI-M64? Here is the another board [1] where it failed
>
> I don't have BPI-M64. Could you enable debug in drivers/mmc/mmc.c to
> check why it fails to select a mode?

I found the issue. Will send v3 in a minute.

>
>> [1] https://patchwork.ozlabs.org/patch/921421/
>>
>> Jagan.
>>
>> --
>> Jagan Teki
>> Free Software Engineer | www.openedev.com
>> U-Boot, Linux | Upstream Maintainer
>> Hyderabad, India.


More information about the U-Boot mailing list