[U-Boot] [PATCH v4 10/32] tpm: disociate TPMv1.x specific and generic code
Miquel Raynal
miquel.raynal at bootlin.com
Tue May 15 09:57:06 UTC 2018
There are no changes in this commit but a new organization of the code
as follow.
* cmd/ directory:
> move existing code from cmd/tpm.c in cmd/tpm-common.c
> move specific code in cmd/tpm-v1.c
> create a specific header file with generic definitions for
commands only called cmd/tpm-user-utils.h
* lib/ directory:
> move existing code from lib/tpm.c in lib/tpm-common.c
> move specific code in lib/tpm-v1.c
> create a specific header file with generic definitions for
the library itself called lib/tpm-utils.h
* include/ directory:
> move existing code from include/tpm.h in include/tpm-common.h
> move specific code in include/tpm-v1.h
Code designated as 'common' is compiled if TPM are used. Code designated
as 'specific' is compiled only if the right specification has been
selected.
All files include tpm-common.h.
Files in cmd/ include tpm-user-utils.h.
Files in lib/ include tpm-utils.h.
Depending on the specification, files may include either (not both)
tpm-v1.h or tpm-v2.h.
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
cmd/Makefile | 3 +-
cmd/tpm-common.c | 289 +++++++++++++++++++++++++++++++++++
cmd/tpm-user-utils.h | 25 +++
cmd/{tpm.c => tpm-v1.c} | 304 ++-----------------------------------
cmd/tpm_test.c | 2 +-
drivers/tpm/tpm-uclass.c | 4 +-
drivers/tpm/tpm_atmel_twi.c | 2 +-
drivers/tpm/tpm_tis_infineon.c | 2 +-
drivers/tpm/tpm_tis_lpc.c | 2 +-
drivers/tpm/tpm_tis_sandbox.c | 2 +-
drivers/tpm/tpm_tis_st33zp24_i2c.c | 2 +-
drivers/tpm/tpm_tis_st33zp24_spi.c | 2 +-
include/tpm-common.h | 211 +++++++++++++++++++++++++
include/{tpm.h => tpm-v1.h} | 214 ++------------------------
lib/Makefile | 3 +-
lib/tpm-common.c | 189 +++++++++++++++++++++++
lib/tpm-utils.h | 96 ++++++++++++
lib/{tpm.c => tpm-v1.c} | 250 +-----------------------------
18 files changed, 855 insertions(+), 747 deletions(-)
create mode 100644 cmd/tpm-common.c
create mode 100644 cmd/tpm-user-utils.h
rename cmd/{tpm.c => tpm-v1.c} (76%)
create mode 100644 include/tpm-common.h
rename include/{tpm.h => tpm-v1.h} (70%)
create mode 100644 lib/tpm-common.c
create mode 100644 lib/tpm-utils.h
rename lib/{tpm.c => tpm-v1.c} (81%)
diff --git a/cmd/Makefile b/cmd/Makefile
index bbeeb7e7f7..66732085e8 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -117,7 +117,8 @@ obj-$(CONFIG_CMD_TERMINAL) += terminal.o
obj-$(CONFIG_CMD_TIME) += time.o
obj-$(CONFIG_CMD_TRACE) += trace.o
obj-$(CONFIG_HUSH_PARSER) += test.o
-obj-$(CONFIG_CMD_TPM_V1) += tpm.o
+obj-$(CONFIG_CMD_TPM) += tpm-common.o
+obj-$(CONFIG_CMD_TPM_V1) += tpm-v1.o
obj-$(CONFIG_CMD_TPM_TEST) += tpm_test.o
obj-$(CONFIG_CMD_CROS_EC) += cros_ec.o
obj-$(CONFIG_CMD_TSI148) += tsi148.o
diff --git a/cmd/tpm-common.c b/cmd/tpm-common.c
new file mode 100644
index 0000000000..235bdf39da
--- /dev/null
+++ b/cmd/tpm-common.c
@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2013 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <asm/unaligned.h>
+#include <linux/string.h>
+#include <tpm-common.h>
+#include "tpm-user-utils.h"
+
+/**
+ * Print a byte string in hexdecimal format, 16-bytes per line.
+ *
+ * @param data byte string to be printed
+ * @param count number of bytes to be printed
+ */
+void print_byte_string(u8 *data, size_t count)
+{
+ int i, print_newline = 0;
+
+ for (i = 0; i < count; i++) {
+ printf(" %02x", data[i]);
+ print_newline = (i % 16 == 15);
+ if (print_newline)
+ putc('\n');
+ }
+ /* Avoid duplicated newline at the end */
+ if (!print_newline)
+ putc('\n');
+}
+
+/**
+ * Convert a text string of hexdecimal values into a byte string.
+ *
+ * @param bytes text string of hexdecimal values with no space
+ * between them
+ * @param data output buffer for byte string. The caller has to make
+ * sure it is large enough for storing the output. If
+ * NULL is passed, a large enough buffer will be allocated,
+ * and the caller must free it.
+ * @param count_ptr output variable for the length of byte string
+ * @return pointer to output buffer
+ */
+void *parse_byte_string(char *bytes, u8 *data, size_t *count_ptr)
+{
+ char byte[3];
+ size_t count, length;
+ int i;
+
+ if (!bytes)
+ return NULL;
+ length = strlen(bytes);
+ count = length / 2;
+
+ if (!data)
+ data = malloc(count);
+ if (!data)
+ return NULL;
+
+ byte[2] = '\0';
+ for (i = 0; i < length; i += 2) {
+ byte[0] = bytes[i];
+ byte[1] = bytes[i + 1];
+ data[i / 2] = (u8)simple_strtoul(byte, NULL, 16);
+ }
+
+ if (count_ptr)
+ *count_ptr = count;
+
+ return data;
+}
+
+/**
+ * report_return_code() - Report any error and return failure or success
+ *
+ * @param return_code TPM command return code
+ * @return value of enum command_ret_t
+ */
+int report_return_code(int return_code)
+{
+ if (return_code) {
+ printf("Error: %d\n", return_code);
+ return CMD_RET_FAILURE;
+ } else {
+ return CMD_RET_SUCCESS;
+ }
+}
+
+/**
+ * Return number of values defined by a type string.
+ *
+ * @param type_str type string
+ * @return number of values of type string
+ */
+int type_string_get_num_values(const char *type_str)
+{
+ return strlen(type_str);
+}
+
+/**
+ * Return total size of values defined by a type string.
+ *
+ * @param type_str type string
+ * @return total size of values of type string, or 0 if type string
+ * contains illegal type character.
+ */
+size_t type_string_get_space_size(const char *type_str)
+{
+ size_t size;
+
+ for (size = 0; *type_str; type_str++) {
+ switch (*type_str) {
+ case 'b':
+ size += 1;
+ break;
+ case 'w':
+ size += 2;
+ break;
+ case 'd':
+ size += 4;
+ break;
+ default:
+ return 0;
+ }
+ }
+
+ return size;
+}
+
+/**
+ * Allocate a buffer large enough to hold values defined by a type
+ * string. The caller has to free the buffer.
+ *
+ * @param type_str type string
+ * @param count pointer for storing size of buffer
+ * @return pointer to buffer or NULL on error
+ */
+void *type_string_alloc(const char *type_str, u32 *count)
+{
+ void *data;
+ size_t size;
+
+ size = type_string_get_space_size(type_str);
+ if (!size)
+ return NULL;
+ data = malloc(size);
+ if (data)
+ *count = size;
+
+ return data;
+}
+
+/**
+ * Pack values defined by a type string into a buffer. The buffer must have
+ * large enough space.
+ *
+ * @param type_str type string
+ * @param values text strings of values to be packed
+ * @param data output buffer of values
+ * @return 0 on success, non-0 on error
+ */
+int type_string_pack(const char *type_str, char * const values[],
+ u8 *data)
+{
+ size_t offset;
+ u32 value;
+
+ for (offset = 0; *type_str; type_str++, values++) {
+ value = simple_strtoul(values[0], NULL, 0);
+ switch (*type_str) {
+ case 'b':
+ data[offset] = value;
+ offset += 1;
+ break;
+ case 'w':
+ put_unaligned_be16(value, data + offset);
+ offset += 2;
+ break;
+ case 'd':
+ put_unaligned_be32(value, data + offset);
+ offset += 4;
+ break;
+ default:
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * Read values defined by a type string from a buffer, and write these values
+ * to environment variables.
+ *
+ * @param type_str type string
+ * @param data input buffer of values
+ * @param vars names of environment variables
+ * @return 0 on success, non-0 on error
+ */
+int type_string_write_vars(const char *type_str, u8 *data,
+ char * const vars[])
+{
+ size_t offset;
+ u32 value;
+
+ for (offset = 0; *type_str; type_str++, vars++) {
+ switch (*type_str) {
+ case 'b':
+ value = data[offset];
+ offset += 1;
+ break;
+ case 'w':
+ value = get_unaligned_be16(data + offset);
+ offset += 2;
+ break;
+ case 'd':
+ value = get_unaligned_be32(data + offset);
+ offset += 4;
+ break;
+ default:
+ return -1;
+ }
+ if (env_set_ulong(*vars, value))
+ return -1;
+ }
+
+ return 0;
+}
+
+int get_tpm(struct udevice **devp)
+{
+ int rc;
+
+ rc = uclass_first_device_err(UCLASS_TPM, devp);
+ if (rc) {
+ printf("Could not find TPM (ret=%d)\n", rc);
+ return CMD_RET_FAILURE;
+ }
+
+ return 0;
+}
+
+int do_tpm_info(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ struct udevice *dev;
+ char buf[80];
+ int rc;
+
+ rc = get_tpm(&dev);
+ if (rc)
+ return rc;
+ rc = tpm_get_desc(dev, buf, sizeof(buf));
+ if (rc < 0) {
+ printf("Couldn't get TPM info (%d)\n", rc);
+ return CMD_RET_FAILURE;
+ }
+ printf("%s\n", buf);
+
+ return 0;
+}
+
+int do_tpm_init(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 1)
+ return CMD_RET_USAGE;
+
+ return report_return_code(tpm_init());
+}
+
+int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ cmd_tbl_t *tpm_commands, *cmd;
+ unsigned int size;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ tpm_commands = get_tpm_commands(&size);
+
+ cmd = find_cmd_tbl(argv[1], tpm_commands, size);
+ if (!cmd)
+ return CMD_RET_USAGE;
+
+ return cmd->cmd(cmdtp, flag, argc - 1, argv + 1);
+}
diff --git a/cmd/tpm-user-utils.h b/cmd/tpm-user-utils.h
new file mode 100644
index 0000000000..6017090971
--- /dev/null
+++ b/cmd/tpm-user-utils.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2013 The Chromium OS Authors.
+ * Coypright (c) 2013 Guntermann & Drunck GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TPM_USER_UTILS_H
+#define __TPM_USER_UTILS_H
+
+void print_byte_string(u8 *data, size_t count);
+void *parse_byte_string(char *bytes, u8 *data, size_t *count_ptr);
+int report_return_code(int return_code);
+int type_string_get_num_values(const char *type_str);
+size_t type_string_get_space_size(const char *type_str);
+void *type_string_alloc(const char *type_str, u32 *count);
+int type_string_pack(const char *type_str, char * const values[], u8 *data);
+int type_string_write_vars(const char *type_str, u8 *data, char * const vars[]);
+int get_tpm(struct udevice **devp);
+
+int do_tpm_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
+int do_tpm_info(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
+int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+
+#endif /* __TPM_USER_UTILS_H */
diff --git a/cmd/tpm.c b/cmd/tpm-v1.c
similarity index 76%
rename from cmd/tpm.c
rename to cmd/tpm-v1.c
index a7ea1c9012..75a2cf2386 100644
--- a/cmd/tpm.c
+++ b/cmd/tpm-v1.c
@@ -5,238 +5,11 @@
*/
#include <common.h>
-#include <command.h>
-#include <dm.h>
#include <malloc.h>
-#include <tpm.h>
#include <asm/unaligned.h>
-#include <linux/string.h>
-
-/* Useful constants */
-enum {
- DIGEST_LENGTH = 20,
- /* max lengths, valid for RSA keys <= 2048 bits */
- TPM_PUBKEY_MAX_LENGTH = 288,
-};
-
-/**
- * Print a byte string in hexdecimal format, 16-bytes per line.
- *
- * @param data byte string to be printed
- * @param count number of bytes to be printed
- */
-static void print_byte_string(u8 *data, size_t count)
-{
- int i, print_newline = 0;
-
- for (i = 0; i < count; i++) {
- printf(" %02x", data[i]);
- print_newline = (i % 16 == 15);
- if (print_newline)
- putc('\n');
- }
- /* Avoid duplicated newline at the end */
- if (!print_newline)
- putc('\n');
-}
-
-/**
- * Convert a text string of hexdecimal values into a byte string.
- *
- * @param bytes text string of hexdecimal values with no space
- * between them
- * @param data output buffer for byte string. The caller has to make
- * sure it is large enough for storing the output. If
- * NULL is passed, a large enough buffer will be allocated,
- * and the caller must free it.
- * @param count_ptr output variable for the length of byte string
- * @return pointer to output buffer
- */
-static void *parse_byte_string(char *bytes, u8 *data, size_t *count_ptr)
-{
- char byte[3];
- size_t count, length;
- int i;
-
- if (!bytes)
- return NULL;
- length = strlen(bytes);
- count = length / 2;
-
- if (!data)
- data = malloc(count);
- if (!data)
- return NULL;
-
- byte[2] = '\0';
- for (i = 0; i < length; i += 2) {
- byte[0] = bytes[i];
- byte[1] = bytes[i + 1];
- data[i / 2] = (u8)simple_strtoul(byte, NULL, 16);
- }
-
- if (count_ptr)
- *count_ptr = count;
-
- return data;
-}
-
-/**
- * report_return_code() - Report any error and return failure or success
- *
- * @param return_code TPM command return code
- * @return value of enum command_ret_t
- */
-static int report_return_code(int return_code)
-{
- if (return_code) {
- printf("Error: %d\n", return_code);
- return CMD_RET_FAILURE;
- } else {
- return CMD_RET_SUCCESS;
- }
-}
-
-/**
- * Return number of values defined by a type string.
- *
- * @param type_str type string
- * @return number of values of type string
- */
-static int type_string_get_num_values(const char *type_str)
-{
- return strlen(type_str);
-}
-
-/**
- * Return total size of values defined by a type string.
- *
- * @param type_str type string
- * @return total size of values of type string, or 0 if type string
- * contains illegal type character.
- */
-static size_t type_string_get_space_size(const char *type_str)
-{
- size_t size;
-
- for (size = 0; *type_str; type_str++) {
- switch (*type_str) {
- case 'b':
- size += 1;
- break;
- case 'w':
- size += 2;
- break;
- case 'd':
- size += 4;
- break;
- default:
- return 0;
- }
- }
-
- return size;
-}
-
-/**
- * Allocate a buffer large enough to hold values defined by a type
- * string. The caller has to free the buffer.
- *
- * @param type_str type string
- * @param count pointer for storing size of buffer
- * @return pointer to buffer or NULL on error
- */
-static void *type_string_alloc(const char *type_str, u32 *count)
-{
- void *data;
- size_t size;
-
- size = type_string_get_space_size(type_str);
- if (!size)
- return NULL;
- data = malloc(size);
- if (data)
- *count = size;
-
- return data;
-}
-
-/**
- * Pack values defined by a type string into a buffer. The buffer must have
- * large enough space.
- *
- * @param type_str type string
- * @param values text strings of values to be packed
- * @param data output buffer of values
- * @return 0 on success, non-0 on error
- */
-static int type_string_pack(const char *type_str, char * const values[],
- u8 *data)
-{
- size_t offset;
- u32 value;
-
- for (offset = 0; *type_str; type_str++, values++) {
- value = simple_strtoul(values[0], NULL, 0);
- switch (*type_str) {
- case 'b':
- data[offset] = value;
- offset += 1;
- break;
- case 'w':
- put_unaligned_be16(value, data + offset);
- offset += 2;
- break;
- case 'd':
- put_unaligned_be32(value, data + offset);
- offset += 4;
- break;
- default:
- return -1;
- }
- }
-
- return 0;
-}
-
-/**
- * Read values defined by a type string from a buffer, and write these values
- * to environment variables.
- *
- * @param type_str type string
- * @param data input buffer of values
- * @param vars names of environment variables
- * @return 0 on success, non-0 on error
- */
-static int type_string_write_vars(const char *type_str, u8 *data,
- char * const vars[])
-{
- size_t offset;
- u32 value;
-
- for (offset = 0; *type_str; type_str++, vars++) {
- switch (*type_str) {
- case 'b':
- value = data[offset];
- offset += 1;
- break;
- case 'w':
- value = get_unaligned_be16(data + offset);
- offset += 2;
- break;
- case 'd':
- value = get_unaligned_be32(data + offset);
- offset += 4;
- break;
- default:
- return -1;
- }
- if (env_set_ulong(*vars, value))
- return -1;
- }
-
- return 0;
-}
+#include <tpm-common.h>
+#include <tpm-v1.h>
+#include "tpm-user-utils.h"
static int do_tpm_startup(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
@@ -427,54 +200,6 @@ static int do_tpm_get_capability(cmd_tbl_t *cmdtp, int flag, int argc,
return report_return_code(rc);
}
-#define TPM_COMMAND_NO_ARG(cmd) \
-static int do_##cmd(cmd_tbl_t *cmdtp, int flag, \
- int argc, char * const argv[]) \
-{ \
- if (argc != 1) \
- return CMD_RET_USAGE; \
- return report_return_code(cmd()); \
-}
-
-TPM_COMMAND_NO_ARG(tpm_init)
-TPM_COMMAND_NO_ARG(tpm_self_test_full)
-TPM_COMMAND_NO_ARG(tpm_continue_self_test)
-TPM_COMMAND_NO_ARG(tpm_force_clear)
-TPM_COMMAND_NO_ARG(tpm_physical_enable)
-TPM_COMMAND_NO_ARG(tpm_physical_disable)
-
-static int get_tpm(struct udevice **devp)
-{
- int rc;
-
- rc = uclass_first_device_err(UCLASS_TPM, devp);
- if (rc) {
- printf("Could not find TPM (ret=%d)\n", rc);
- return CMD_RET_FAILURE;
- }
-
- return 0;
-}
-
-static int do_tpm_info(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
-{
- struct udevice *dev;
- char buf[80];
- int rc;
-
- rc = get_tpm(&dev);
- if (rc)
- return rc;
- rc = tpm_get_desc(dev, buf, sizeof(buf));
- if (rc < 0) {
- printf("Couldn't get TPM info (%d)\n", rc);
- return CMD_RET_FAILURE;
- }
- printf("%s\n", buf);
-
- return 0;
-}
-
static int do_tpm_raw_transfer(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
@@ -813,10 +538,13 @@ static int do_tpm_list(cmd_tbl_t *cmdtp, int flag, int argc,
}
#endif /* CONFIG_TPM_LIST_RESOURCES */
-#define MAKE_TPM_CMD_ENTRY(cmd) \
- U_BOOT_CMD_MKENT(cmd, 0, 1, do_tpm_ ## cmd, "", "")
+TPM_COMMAND_NO_ARG(tpm_self_test_full)
+TPM_COMMAND_NO_ARG(tpm_continue_self_test)
+TPM_COMMAND_NO_ARG(tpm_force_clear)
+TPM_COMMAND_NO_ARG(tpm_physical_enable)
+TPM_COMMAND_NO_ARG(tpm_physical_disable)
-static cmd_tbl_t tpm_commands[] = {
+static cmd_tbl_t tpm1_commands[] = {
U_BOOT_CMD_MKENT(info, 0, 1, do_tpm_info, "", ""),
U_BOOT_CMD_MKENT(init, 0, 1, do_tpm_init, "", ""),
U_BOOT_CMD_MKENT(startup, 0, 1,
@@ -881,21 +609,15 @@ static cmd_tbl_t tpm_commands[] = {
#endif /* CONFIG_TPM_LIST_RESOURCES */
};
-static int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+cmd_tbl_t *get_tpm_commands(unsigned int *size)
{
- cmd_tbl_t *tpm_cmd;
+ *size = ARRAY_SIZE(tpm1_commands);
- if (argc < 2)
- return CMD_RET_USAGE;
- tpm_cmd = find_cmd_tbl(argv[1], tpm_commands, ARRAY_SIZE(tpm_commands));
- if (!tpm_cmd)
- return CMD_RET_USAGE;
-
- return tpm_cmd->cmd(cmdtp, flag, argc - 1, argv + 1);
+ return tpm1_commands;
}
U_BOOT_CMD(tpm, CONFIG_SYS_MAXARGS, 1, do_tpm,
-"Issue a TPM command",
+"Issue a TPMv1.x command",
"cmd args...\n"
" - Issue TPM command <cmd> with arguments <args...>.\n"
"Admin Startup and State Commands:\n"
diff --git a/cmd/tpm_test.c b/cmd/tpm_test.c
index 37ad2ff33d..c9d641f0ce 100644
--- a/cmd/tpm_test.c
+++ b/cmd/tpm_test.c
@@ -7,7 +7,7 @@
#include <common.h>
#include <command.h>
#include <environment.h>
-#include <tpm.h>
+#include <tpm-v1.h>
/* Prints error and returns on failure */
#define TPM_CHECK(tpm_command) do { \
diff --git a/drivers/tpm/tpm-uclass.c b/drivers/tpm/tpm-uclass.c
index b6e1fc5e62..eb0e511c8f 100644
--- a/drivers/tpm/tpm-uclass.c
+++ b/drivers/tpm/tpm-uclass.c
@@ -7,8 +7,10 @@
#include <common.h>
#include <dm.h>
-#include <tpm.h>
#include <linux/unaligned/be_byteshift.h>
+#if defined(CONFIG_TPM_V1)
+#include <tpm-v1.h>
+#endif
#include "tpm_internal.h"
int tpm_open(struct udevice *dev)
diff --git a/drivers/tpm/tpm_atmel_twi.c b/drivers/tpm/tpm_atmel_twi.c
index 4fd772dc4f..a6f5a333dd 100644
--- a/drivers/tpm/tpm_atmel_twi.c
+++ b/drivers/tpm/tpm_atmel_twi.c
@@ -8,7 +8,7 @@
#include <common.h>
#include <dm.h>
-#include <tpm.h>
+#include <tpm-v1.h>
#include <i2c.h>
#include <asm/unaligned.h>
diff --git a/drivers/tpm/tpm_tis_infineon.c b/drivers/tpm/tpm_tis_infineon.c
index 41b748e7a2..30170afce0 100644
--- a/drivers/tpm/tpm_tis_infineon.c
+++ b/drivers/tpm/tpm_tis_infineon.c
@@ -24,7 +24,7 @@
#include <dm.h>
#include <fdtdec.h>
#include <i2c.h>
-#include <tpm.h>
+#include <tpm-v1.h>
#include <linux/errno.h>
#include <linux/compiler.h>
#include <linux/types.h>
diff --git a/drivers/tpm/tpm_tis_lpc.c b/drivers/tpm/tpm_tis_lpc.c
index c00a2d030b..bf955e73f2 100644
--- a/drivers/tpm/tpm_tis_lpc.c
+++ b/drivers/tpm/tpm_tis_lpc.c
@@ -16,7 +16,7 @@
#include <common.h>
#include <dm.h>
#include <mapmem.h>
-#include <tpm.h>
+#include <tpm-v1.h>
#include <asm/io.h>
#define PREFIX "lpc_tpm: "
diff --git a/drivers/tpm/tpm_tis_sandbox.c b/drivers/tpm/tpm_tis_sandbox.c
index e7746dc675..a19c1ba33d 100644
--- a/drivers/tpm/tpm_tis_sandbox.c
+++ b/drivers/tpm/tpm_tis_sandbox.c
@@ -6,7 +6,7 @@
#include <common.h>
#include <dm.h>
-#include <tpm.h>
+#include <tpm-v1.h>
#include <asm/state.h>
#include <asm/unaligned.h>
#include <linux/crc8.h>
diff --git a/drivers/tpm/tpm_tis_st33zp24_i2c.c b/drivers/tpm/tpm_tis_st33zp24_i2c.c
index 245218fc07..21c2b56034 100644
--- a/drivers/tpm/tpm_tis_st33zp24_i2c.c
+++ b/drivers/tpm/tpm_tis_st33zp24_i2c.c
@@ -17,7 +17,7 @@
#include <dm.h>
#include <fdtdec.h>
#include <i2c.h>
-#include <tpm.h>
+#include <tpm-v1.h>
#include <errno.h>
#include <linux/types.h>
#include <asm/unaligned.h>
diff --git a/drivers/tpm/tpm_tis_st33zp24_spi.c b/drivers/tpm/tpm_tis_st33zp24_spi.c
index c4c5e05286..07daad7beb 100644
--- a/drivers/tpm/tpm_tis_st33zp24_spi.c
+++ b/drivers/tpm/tpm_tis_st33zp24_spi.c
@@ -17,7 +17,7 @@
#include <dm.h>
#include <fdtdec.h>
#include <spi.h>
-#include <tpm.h>
+#include <tpm-v1.h>
#include <errno.h>
#include <linux/types.h>
#include <asm/unaligned.h>
diff --git a/include/tpm-common.h b/include/tpm-common.h
new file mode 100644
index 0000000000..ecc7bc067a
--- /dev/null
+++ b/include/tpm-common.h
@@ -0,0 +1,211 @@
+/*
+ * Copyright (c) 2013 The Chromium OS Authors.
+ * Coypright (c) 2013 Guntermann & Drunck GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TPM_COMMON_H
+#define __TPM_COMMON_H
+
+enum tpm_duration {
+ TPM_SHORT = 0,
+ TPM_MEDIUM = 1,
+ TPM_LONG = 2,
+ TPM_UNDEFINED,
+
+ TPM_DURATION_COUNT,
+};
+
+/*
+ * Here is a partial implementation of TPM commands. Please consult TCG Main
+ * Specification for definitions of TPM commands.
+ */
+
+#define TPM_HEADER_SIZE 10
+
+/* Max buffer size supported by our tpm */
+#define TPM_DEV_BUFSIZE 1260
+
+/**
+ * struct tpm_chip_priv - Information about a TPM, stored by the uclass
+ *
+ * These values must be set up by the device's probe() method before
+ * communcation is attempted. If the device has an xfer() method, this is
+ * not needed. There is no need to set up @buf.
+ *
+ * @duration_ms: Length of each duration type in milliseconds
+ * @retry_time_ms: Time to wait before retrying receive
+ */
+struct tpm_chip_priv {
+ uint duration_ms[TPM_DURATION_COUNT];
+ uint retry_time_ms;
+ u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)]; /* Max buffer size + addr */
+};
+
+/**
+ * struct tpm_ops - low-level TPM operations
+ *
+ * These are designed to avoid loops and delays in the driver itself. These
+ * should be handled in the uclass.
+ *
+ * In gneral you should implement everything except xfer(). Where you need
+ * complete control of the transfer, then xfer() can be provided and will
+ * override the other methods.
+ *
+ * This interface is for low-level TPM access. It does not understand the
+ * concept of localities or the various TPM messages. That interface is
+ * defined in the functions later on in this file, but they all translate
+ * to bytes which are sent and received.
+ */
+struct tpm_ops {
+ /**
+ * open() - Request access to locality 0 for the caller
+ *
+ * After all commands have been completed the caller should call
+ * close().
+ *
+ * @dev: Device to close
+ * @return 0 ok OK, -ve on error
+ */
+ int (*open)(struct udevice *dev);
+
+ /**
+ * close() - Close the current session
+ *
+ * Releasing the locked locality. Returns 0 on success, -ve 1 on
+ * failure (in case lock removal did not succeed).
+ *
+ * @dev: Device to close
+ * @return 0 ok OK, -ve on error
+ */
+ int (*close)(struct udevice *dev);
+
+ /**
+ * get_desc() - Get a text description of the TPM
+ *
+ * @dev: Device to check
+ * @buf: Buffer to put the string
+ * @size: Maximum size of buffer
+ * @return length of string, or -ENOSPC it no space
+ */
+ int (*get_desc)(struct udevice *dev, char *buf, int size);
+
+ /**
+ * send() - send data to the TPM
+ *
+ * @dev: Device to talk to
+ * @sendbuf: Buffer of the data to send
+ * @send_size: Size of the data to send
+ *
+ * Returns 0 on success or -ve on failure.
+ */
+ int (*send)(struct udevice *dev, const u8 *sendbuf, size_t send_size);
+
+ /**
+ * recv() - receive a response from the TPM
+ *
+ * @dev: Device to talk to
+ * @recvbuf: Buffer to save the response to
+ * @max_size: Maximum number of bytes to receive
+ *
+ * Returns number of bytes received on success, -EAGAIN if the TPM
+ * response is not ready, -EINTR if cancelled, or other -ve value on
+ * failure.
+ */
+ int (*recv)(struct udevice *dev, u8 *recvbuf, size_t max_size);
+
+ /**
+ * cleanup() - clean up after an operation in progress
+ *
+ * This is called if receiving times out. The TPM may need to abort
+ * the current transaction if it did not complete, and make itself
+ * ready for another.
+ *
+ * @dev: Device to talk to
+ */
+ int (*cleanup)(struct udevice *dev);
+
+ /**
+ * xfer() - send data to the TPM and get response
+ *
+ * This method is optional. If it exists it is used in preference
+ * to send(), recv() and cleanup(). It should handle all aspects of
+ * TPM communication for a single transfer.
+ *
+ * @dev: Device to talk to
+ * @sendbuf: Buffer of the data to send
+ * @send_size: Size of the data to send
+ * @recvbuf: Buffer to save the response to
+ * @recv_size: Pointer to the size of the response buffer
+ *
+ * Returns 0 on success (and places the number of response bytes at
+ * recv_size) or -ve on failure.
+ */
+ int (*xfer)(struct udevice *dev, const u8 *sendbuf, size_t send_size,
+ u8 *recvbuf, size_t *recv_size);
+};
+
+#define tpm_get_ops(dev) ((struct tpm_ops *)device_get_ops(dev))
+
+#define MAKE_TPM_CMD_ENTRY(cmd) \
+ U_BOOT_CMD_MKENT(cmd, 0, 1, do_tpm_ ## cmd, "", "")
+
+#define TPM_COMMAND_NO_ARG(cmd) \
+int do_##cmd(cmd_tbl_t *cmdtp, int flag, \
+ int argc, char * const argv[]) \
+{ \
+ if (argc != 1) \
+ return CMD_RET_USAGE; \
+ return report_return_code(cmd()); \
+}
+
+/**
+ * tpm_get_desc() - Get a text description of the TPM
+ *
+ * @dev: Device to check
+ * @buf: Buffer to put the string
+ * @size: Maximum size of buffer
+ * @return length of string, or -ENOSPC it no space
+ */
+int tpm_get_desc(struct udevice *dev, char *buf, int size);
+
+/**
+ * tpm_xfer() - send data to the TPM and get response
+ *
+ * This first uses the device's send() method to send the bytes. Then it calls
+ * recv() to get the reply. If recv() returns -EAGAIN then it will delay a
+ * short time and then call recv() again.
+ *
+ * Regardless of whether recv() completes successfully, it will then call
+ * cleanup() to finish the transaction.
+ *
+ * Note that the outgoing data is inspected to determine command type
+ * (ordinal) and a timeout is used for that command type.
+ *
+ * @sendbuf - buffer of the data to send
+ * @send_size size of the data to send
+ * @recvbuf - memory to save the response to
+ * @recv_len - pointer to the size of the response buffer
+ *
+ * Returns 0 on success (and places the number of response bytes at
+ * recv_len) or -ve on failure.
+ */
+int tpm_xfer(struct udevice *dev, const u8 *sendbuf, size_t send_size,
+ u8 *recvbuf, size_t *recv_size);
+
+/**
+ * Initialize TPM device. It must be called before any TPM commands.
+ *
+ * @return 0 on success, non-0 on error.
+ */
+int tpm_init(void);
+
+/**
+ * Retrieve the array containing all the commands.
+ *
+ * @return a cmd_tbl_t array.
+ */
+cmd_tbl_t *get_tpm_commands(unsigned int *size);
+
+#endif /* __TPM_COMMON_H */
diff --git a/include/tpm.h b/include/tpm-v1.h
similarity index 70%
rename from include/tpm.h
rename to include/tpm-v1.h
index e1fc2ec252..9bb322ecbb 100644
--- a/include/tpm.h
+++ b/include/tpm-v1.h
@@ -5,23 +5,22 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __TPM_H
-#define __TPM_H
+#ifndef __TPM_V1_H
+#define __TPM_V1_H
-/*
- * Here is a partial implementation of TPM commands. Please consult TCG Main
- * Specification for definitions of TPM commands.
- */
+#include <tpm-common.h>
-#define TPM_HEADER_SIZE 10
-
-enum tpm_duration {
- TPM_SHORT = 0,
- TPM_MEDIUM = 1,
- TPM_LONG = 2,
- TPM_UNDEFINED,
-
- TPM_DURATION_COUNT,
+/* Useful constants */
+enum {
+ TPM_REQUEST_HEADER_LENGTH = 10,
+ TPM_RESPONSE_HEADER_LENGTH = 10,
+ PCR_DIGEST_LENGTH = 20,
+ DIGEST_LENGTH = 20,
+ TPM_REQUEST_AUTH_LENGTH = 45,
+ TPM_RESPONSE_AUTH_LENGTH = 41,
+ /* some max lengths, valid for RSA keys <= 2048 bits */
+ TPM_KEY12_MAX_LENGTH = 618,
+ TPM_PUBKEY_MAX_LENGTH = 288,
};
enum tpm_startup_type {
@@ -233,189 +232,6 @@ struct tpm_permanent_flags {
u8 disable_full_da_logic_info;
} __packed;
-/* Max buffer size supported by our tpm */
-#define TPM_DEV_BUFSIZE 1260
-
-/**
- * struct tpm_chip_priv - Information about a TPM, stored by the uclass
- *
- * These values must be set up by the device's probe() method before
- * communcation is attempted. If the device has an xfer() method, this is
- * not needed. There is no need to set up @buf.
- *
- * @duration_ms: Length of each duration type in milliseconds
- * @retry_time_ms: Time to wait before retrying receive
- */
-struct tpm_chip_priv {
- uint duration_ms[TPM_DURATION_COUNT];
- uint retry_time_ms;
- u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)]; /* Max buffer size + addr */
-};
-
-/**
- * struct tpm_ops - low-level TPM operations
- *
- * These are designed to avoid loops and delays in the driver itself. These
- * should be handled in the uclass.
- *
- * In gneral you should implement everything except xfer(). Where you need
- * complete control of the transfer, then xfer() can be provided and will
- * override the other methods.
- *
- * This interface is for low-level TPM access. It does not understand the
- * concept of localities or the various TPM messages. That interface is
- * defined in the functions later on in this file, but they all translate
- * to bytes which are sent and received.
- */
-struct tpm_ops {
- /**
- * open() - Request access to locality 0 for the caller
- *
- * After all commands have been completed the caller should call
- * close().
- *
- * @dev: Device to close
- * @return 0 ok OK, -ve on error
- */
- int (*open)(struct udevice *dev);
-
- /**
- * close() - Close the current session
- *
- * Releasing the locked locality. Returns 0 on success, -ve 1 on
- * failure (in case lock removal did not succeed).
- *
- * @dev: Device to close
- * @return 0 ok OK, -ve on error
- */
- int (*close)(struct udevice *dev);
-
- /**
- * get_desc() - Get a text description of the TPM
- *
- * @dev: Device to check
- * @buf: Buffer to put the string
- * @size: Maximum size of buffer
- * @return length of string, or -ENOSPC it no space
- */
- int (*get_desc)(struct udevice *dev, char *buf, int size);
-
- /**
- * send() - send data to the TPM
- *
- * @dev: Device to talk to
- * @sendbuf: Buffer of the data to send
- * @send_size: Size of the data to send
- *
- * Returns 0 on success or -ve on failure.
- */
- int (*send)(struct udevice *dev, const u8 *sendbuf, size_t send_size);
-
- /**
- * recv() - receive a response from the TPM
- *
- * @dev: Device to talk to
- * @recvbuf: Buffer to save the response to
- * @max_size: Maximum number of bytes to receive
- *
- * Returns number of bytes received on success, -EAGAIN if the TPM
- * response is not ready, -EINTR if cancelled, or other -ve value on
- * failure.
- */
- int (*recv)(struct udevice *dev, u8 *recvbuf, size_t max_size);
-
- /**
- * cleanup() - clean up after an operation in progress
- *
- * This is called if receiving times out. The TPM may need to abort
- * the current transaction if it did not complete, and make itself
- * ready for another.
- *
- * @dev: Device to talk to
- */
- int (*cleanup)(struct udevice *dev);
-
- /**
- * xfer() - send data to the TPM and get response
- *
- * This method is optional. If it exists it is used in preference
- * to send(), recv() and cleanup(). It should handle all aspects of
- * TPM communication for a single transfer.
- *
- * @dev: Device to talk to
- * @sendbuf: Buffer of the data to send
- * @send_size: Size of the data to send
- * @recvbuf: Buffer to save the response to
- * @recv_size: Pointer to the size of the response buffer
- *
- * Returns 0 on success (and places the number of response bytes at
- * recv_size) or -ve on failure.
- */
- int (*xfer)(struct udevice *dev, const u8 *sendbuf, size_t send_size,
- u8 *recvbuf, size_t *recv_size);
-};
-
-#define tpm_get_ops(dev) ((struct tpm_ops *)device_get_ops(dev))
-
-/**
- * tpm_open() - Request access to locality 0 for the caller
- *
- * After all commands have been completed the caller is supposed to
- * call tpm_close().
- *
- * Returns 0 on success, -ve on failure.
- */
-int tpm_open(struct udevice *dev);
-
-/**
- * tpm_close() - Close the current session
- *
- * Releasing the locked locality. Returns 0 on success, -ve 1 on
- * failure (in case lock removal did not succeed).
- */
-int tpm_close(struct udevice *dev);
-
-/**
- * tpm_get_desc() - Get a text description of the TPM
- *
- * @dev: Device to check
- * @buf: Buffer to put the string
- * @size: Maximum size of buffer
- * @return length of string, or -ENOSPC it no space
- */
-int tpm_get_desc(struct udevice *dev, char *buf, int size);
-
-/**
- * tpm_xfer() - send data to the TPM and get response
- *
- * This first uses the device's send() method to send the bytes. Then it calls
- * recv() to get the reply. If recv() returns -EAGAIN then it will delay a
- * short time and then call recv() again.
- *
- * Regardless of whether recv() completes successfully, it will then call
- * cleanup() to finish the transaction.
- *
- * Note that the outgoing data is inspected to determine command type
- * (ordinal) and a timeout is used for that command type.
- *
- * @sendbuf - buffer of the data to send
- * @send_size size of the data to send
- * @recvbuf - memory to save the response to
- * @recv_len - pointer to the size of the response buffer
- *
- * Returns 0 on success (and places the number of response bytes at
- * recv_len) or -ve on failure.
- */
-int tpm_xfer(struct udevice *dev, const u8 *sendbuf, size_t send_size,
- u8 *recvbuf, size_t *recv_size);
-
-/**
- * Initialize TPM device. It must be called before any TPM commands.
- *
- * @return 0 on success, non-0 on error.
- */
-int tpm_init(void);
-
/**
* Issue a TPM_Startup command.
*
@@ -662,4 +478,4 @@ u32 tpm_find_key_sha1(const u8 auth[20], const u8 pubkey_digest[20],
*/
u32 tpm_get_random(void *data, u32 count);
-#endif /* __TPM_H */
+#endif /* __TPM_V1_H */
diff --git a/lib/Makefile b/lib/Makefile
index 9ec4a93043..2052954841 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -40,7 +40,8 @@ obj-$(CONFIG_PHYSMEM) += physmem.o
obj-y += qsort.o
obj-y += rc4.o
obj-$(CONFIG_SUPPORT_EMMC_RPMB) += sha256.o
-obj-$(CONFIG_TPM_V1) += tpm.o
+obj-$(CONFIG_TPM) += tpm-common.o
+obj-$(CONFIG_TPM_V1) += tpm-v1.o
obj-$(CONFIG_RBTREE) += rbtree.o
obj-$(CONFIG_BITREVERSE) += bitrev.o
obj-y += list_sort.o
diff --git a/lib/tpm-common.c b/lib/tpm-common.c
new file mode 100644
index 0000000000..0812b73220
--- /dev/null
+++ b/lib/tpm-common.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2013 The Chromium OS Authors.
+ * Coypright (c) 2013 Guntermann & Drunck GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/unaligned.h>
+#include <tpm-common.h>
+#include "tpm-utils.h"
+
+int pack_byte_string(u8 *str, size_t size, const char *format, ...)
+{
+ va_list args;
+ size_t offset = 0, length = 0;
+ u8 *data = NULL;
+ u32 value = 0;
+
+ va_start(args, format);
+ for (; *format; format++) {
+ switch (*format) {
+ case 'b':
+ offset = va_arg(args, size_t);
+ value = va_arg(args, int);
+ length = 1;
+ break;
+ case 'w':
+ offset = va_arg(args, size_t);
+ value = va_arg(args, int);
+ length = 2;
+ break;
+ case 'd':
+ offset = va_arg(args, size_t);
+ value = va_arg(args, u32);
+ length = 4;
+ break;
+ case 's':
+ offset = va_arg(args, size_t);
+ data = va_arg(args, u8 *);
+ length = va_arg(args, u32);
+ break;
+ default:
+ debug("Couldn't recognize format string\n");
+ va_end(args);
+ return -1;
+ }
+
+ if (offset + length > size) {
+ va_end(args);
+ return -1;
+ }
+
+ switch (*format) {
+ case 'b':
+ str[offset] = value;
+ break;
+ case 'w':
+ put_unaligned_be16(value, str + offset);
+ break;
+ case 'd':
+ put_unaligned_be32(value, str + offset);
+ break;
+ case 's':
+ memcpy(str + offset, data, length);
+ break;
+ }
+ }
+ va_end(args);
+
+ return 0;
+}
+
+int unpack_byte_string(const u8 *str, size_t size, const char *format, ...)
+{
+ va_list args;
+ size_t offset = 0, length = 0;
+ u8 *ptr8 = NULL;
+ u16 *ptr16 = NULL;
+ u32 *ptr32 = NULL;
+
+ va_start(args, format);
+ for (; *format; format++) {
+ switch (*format) {
+ case 'b':
+ offset = va_arg(args, size_t);
+ ptr8 = va_arg(args, u8 *);
+ length = 1;
+ break;
+ case 'w':
+ offset = va_arg(args, size_t);
+ ptr16 = va_arg(args, u16 *);
+ length = 2;
+ break;
+ case 'd':
+ offset = va_arg(args, size_t);
+ ptr32 = va_arg(args, u32 *);
+ length = 4;
+ break;
+ case 's':
+ offset = va_arg(args, size_t);
+ ptr8 = va_arg(args, u8 *);
+ length = va_arg(args, u32);
+ break;
+ default:
+ va_end(args);
+ debug("Couldn't recognize format string\n");
+ return -1;
+ }
+
+ if (offset + length > size) {
+ va_end(args);
+ return -1;
+ }
+
+ switch (*format) {
+ case 'b':
+ *ptr8 = str[offset];
+ break;
+ case 'w':
+ *ptr16 = get_unaligned_be16(str + offset);
+ break;
+ case 'd':
+ *ptr32 = get_unaligned_be32(str + offset);
+ break;
+ case 's':
+ memcpy(ptr8, str + offset, length);
+ break;
+ }
+ }
+ va_end(args);
+
+ return 0;
+}
+
+u32 tpm_command_size(const void *command)
+{
+ const size_t command_size_offset = 2;
+
+ return get_unaligned_be32(command + command_size_offset);
+}
+
+u32 tpm_return_code(const void *response)
+{
+ const size_t return_code_offset = 6;
+
+ return get_unaligned_be32(response + return_code_offset);
+}
+
+u32 tpm_sendrecv_command(const void *command, void *response, size_t *size_ptr)
+{
+ struct udevice *dev;
+ int err, ret;
+ u8 response_buffer[COMMAND_BUFFER_SIZE];
+ size_t response_length;
+
+ if (response) {
+ response_length = *size_ptr;
+ } else {
+ response = response_buffer;
+ response_length = sizeof(response_buffer);
+ }
+
+ ret = uclass_first_device_err(UCLASS_TPM, &dev);
+ if (ret)
+ return ret;
+ err = tpm_xfer(dev, command, tpm_command_size(command),
+ response, &response_length);
+
+ if (err < 0)
+ return TPM_LIB_ERROR;
+ if (size_ptr)
+ *size_ptr = response_length;
+
+ return tpm_return_code(response);
+}
+
+int tpm_init(void)
+{
+ struct udevice *dev;
+ int err;
+
+ err = uclass_first_device_err(UCLASS_TPM, &dev);
+ if (err)
+ return err;
+
+ return tpm_open(dev);
+}
diff --git a/lib/tpm-utils.h b/lib/tpm-utils.h
new file mode 100644
index 0000000000..429da46232
--- /dev/null
+++ b/lib/tpm-utils.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2013 The Chromium OS Authors.
+ * Coypright (c) 2013 Guntermann & Drunck GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TPM_UTILS_H
+#define __TPM_UTILS_H
+
+#define COMMAND_BUFFER_SIZE 256
+
+/* Internal error of TPM command library */
+#define TPM_LIB_ERROR ((u32)~0u)
+
+/**
+ * tpm_open() - Request access to locality 0 for the caller
+ *
+ * After all commands have been completed the caller is supposed to
+ * call tpm_close().
+ *
+ * Returns 0 on success, -ve on failure.
+ */
+int tpm_open(struct udevice *dev);
+
+/**
+ * tpm_close() - Close the current session
+ *
+ * Releasing the locked locality. Returns 0 on success, -ve 1 on
+ * failure (in case lock removal did not succeed).
+ */
+int tpm_close(struct udevice *dev);
+
+/**
+ * Pack data into a byte string. The data types are specified in
+ * the format string: 'b' means unsigned byte, 'w' unsigned word,
+ * 'd' unsigned double word, and 's' byte string. The data are a
+ * series of offsets and values (for type byte string there are also
+ * lengths). The data values are packed into the byte string
+ * sequentially, and so a latter value could over-write a former
+ * value.
+ *
+ * @param str output string
+ * @param size size of output string
+ * @param format format string
+ * @param ... data points
+ * @return 0 on success, non-0 on error
+ */
+int pack_byte_string(u8 *str, size_t size, const char *format, ...);
+
+/**
+ * Unpack data from a byte string. The data types are specified in
+ * the format string: 'b' means unsigned byte, 'w' unsigned word,
+ * 'd' unsigned double word, and 's' byte string. The data are a
+ * series of offsets and pointers (for type byte string there are also
+ * lengths).
+ *
+ * @param str output string
+ * @param size size of output string
+ * @param format format string
+ * @param ... data points
+ * @return 0 on success, non-0 on error
+ */
+int unpack_byte_string(const u8 *str, size_t size, const char *format, ...);
+
+/**
+ * Get TPM command size.
+ *
+ * @param command byte string of TPM command
+ * @return command size of the TPM command
+ */
+u32 tpm_command_size(const void *command);
+
+/**
+ * Get TPM response return code, which is one of TPM_RESULT values.
+ *
+ * @param response byte string of TPM response
+ * @return return code of the TPM response
+ */
+u32 tpm_return_code(const void *response);
+
+/**
+ * Send a TPM command and return response's return code, and optionally
+ * return response to caller.
+ *
+ * @param command byte string of TPM command
+ * @param response output buffer for TPM response, or NULL if the
+ * caller does not care about it
+ * @param size_ptr output buffer size (input parameter) and TPM
+ * response length (output parameter); this parameter
+ * is a bidirectional
+ * @return return code of the TPM response
+ */
+u32 tpm_sendrecv_command(const void *command, void *response, size_t *size_ptr);
+
+#endif /* __TPM_UTILS_H */
diff --git a/lib/tpm.c b/lib/tpm-v1.c
similarity index 81%
rename from lib/tpm.c
rename to lib/tpm-v1.c
index e8ebbbe6cd..7893a8bd34 100644
--- a/lib/tpm.c
+++ b/lib/tpm-v1.c
@@ -7,26 +7,11 @@
#include <common.h>
#include <dm.h>
-#include <tpm.h>
#include <asm/unaligned.h>
#include <u-boot/sha1.h>
-
-/* Internal error of TPM command library */
-#define TPM_LIB_ERROR ((u32)~0u)
-
-/* Useful constants */
-enum {
- COMMAND_BUFFER_SIZE = 256,
- TPM_REQUEST_HEADER_LENGTH = 10,
- TPM_RESPONSE_HEADER_LENGTH = 10,
- PCR_DIGEST_LENGTH = 20,
- DIGEST_LENGTH = 20,
- TPM_REQUEST_AUTH_LENGTH = 45,
- TPM_RESPONSE_AUTH_LENGTH = 41,
- /* some max lengths, valid for RSA keys <= 2048 bits */
- TPM_KEY12_MAX_LENGTH = 618,
- TPM_PUBKEY_MAX_LENGTH = 288,
-};
+#include <tpm-common.h>
+#include <tpm-v1.h>
+#include "tpm-utils.h"
#ifdef CONFIG_TPM_AUTH_SESSIONS
@@ -45,235 +30,6 @@ static struct session_data oiap_session = {0, };
#endif /* CONFIG_TPM_AUTH_SESSIONS */
-/**
- * Pack data into a byte string. The data types are specified in
- * the format string: 'b' means unsigned byte, 'w' unsigned word,
- * 'd' unsigned double word, and 's' byte string. The data are a
- * series of offsets and values (for type byte string there are also
- * lengths). The data values are packed into the byte string
- * sequentially, and so a latter value could over-write a former
- * value.
- *
- * @param str output string
- * @param size size of output string
- * @param format format string
- * @param ... data points
- * @return 0 on success, non-0 on error
- */
-int pack_byte_string(u8 *str, size_t size, const char *format, ...)
-{
- va_list args;
- size_t offset = 0, length = 0;
- u8 *data = NULL;
- u32 value = 0;
-
- va_start(args, format);
- for (; *format; format++) {
- switch (*format) {
- case 'b':
- offset = va_arg(args, size_t);
- value = va_arg(args, int);
- length = 1;
- break;
- case 'w':
- offset = va_arg(args, size_t);
- value = va_arg(args, int);
- length = 2;
- break;
- case 'd':
- offset = va_arg(args, size_t);
- value = va_arg(args, u32);
- length = 4;
- break;
- case 's':
- offset = va_arg(args, size_t);
- data = va_arg(args, u8 *);
- length = va_arg(args, u32);
- break;
- default:
- debug("Couldn't recognize format string\n");
- va_end(args);
- return -1;
- }
-
- if (offset + length > size) {
- va_end(args);
- return -1;
- }
-
- switch (*format) {
- case 'b':
- str[offset] = value;
- break;
- case 'w':
- put_unaligned_be16(value, str + offset);
- break;
- case 'd':
- put_unaligned_be32(value, str + offset);
- break;
- case 's':
- memcpy(str + offset, data, length);
- break;
- }
- }
- va_end(args);
-
- return 0;
-}
-
-/**
- * Unpack data from a byte string. The data types are specified in
- * the format string: 'b' means unsigned byte, 'w' unsigned word,
- * 'd' unsigned double word, and 's' byte string. The data are a
- * series of offsets and pointers (for type byte string there are also
- * lengths).
- *
- * @param str output string
- * @param size size of output string
- * @param format format string
- * @param ... data points
- * @return 0 on success, non-0 on error
- */
-int unpack_byte_string(const u8 *str, size_t size, const char *format, ...)
-{
- va_list args;
- size_t offset = 0, length = 0;
- u8 *ptr8 = NULL;
- u16 *ptr16 = NULL;
- u32 *ptr32 = NULL;
-
- va_start(args, format);
- for (; *format; format++) {
- switch (*format) {
- case 'b':
- offset = va_arg(args, size_t);
- ptr8 = va_arg(args, u8 *);
- length = 1;
- break;
- case 'w':
- offset = va_arg(args, size_t);
- ptr16 = va_arg(args, u16 *);
- length = 2;
- break;
- case 'd':
- offset = va_arg(args, size_t);
- ptr32 = va_arg(args, u32 *);
- length = 4;
- break;
- case 's':
- offset = va_arg(args, size_t);
- ptr8 = va_arg(args, u8 *);
- length = va_arg(args, u32);
- break;
- default:
- va_end(args);
- debug("Couldn't recognize format string\n");
- return -1;
- }
-
- if (offset + length > size) {
- va_end(args);
- return -1;
- }
-
- switch (*format) {
- case 'b':
- *ptr8 = str[offset];
- break;
- case 'w':
- *ptr16 = get_unaligned_be16(str + offset);
- break;
- case 'd':
- *ptr32 = get_unaligned_be32(str + offset);
- break;
- case 's':
- memcpy(ptr8, str + offset, length);
- break;
- }
- }
- va_end(args);
-
- return 0;
-}
-
-/**
- * Get TPM command size.
- *
- * @param command byte string of TPM command
- * @return command size of the TPM command
- */
-static u32 tpm_command_size(const void *command)
-{
- const size_t command_size_offset = 2;
-
- return get_unaligned_be32(command + command_size_offset);
-}
-
-/**
- * Get TPM response return code, which is one of TPM_RESULT values.
- *
- * @param response byte string of TPM response
- * @return return code of the TPM response
- */
-static u32 tpm_return_code(const void *response)
-{
- const size_t return_code_offset = 6;
-
- return get_unaligned_be32(response + return_code_offset);
-}
-
-/**
- * Send a TPM command and return response's return code, and optionally
- * return response to caller.
- *
- * @param command byte string of TPM command
- * @param response output buffer for TPM response, or NULL if the
- * caller does not care about it
- * @param size_ptr output buffer size (input parameter) and TPM
- * response length (output parameter); this parameter
- * is a bidirectional
- * @return return code of the TPM response
- */
-static u32 tpm_sendrecv_command(const void *command, void *response,
- size_t *size_ptr)
-{
- struct udevice *dev;
- int err, ret;
- u8 response_buffer[COMMAND_BUFFER_SIZE];
- size_t response_length;
-
- if (response) {
- response_length = *size_ptr;
- } else {
- response = response_buffer;
- response_length = sizeof(response_buffer);
- }
-
- ret = uclass_first_device_err(UCLASS_TPM, &dev);
- if (ret)
- return ret;
- err = tpm_xfer(dev, command, tpm_command_size(command),
- response, &response_length);
-
- if (err < 0)
- return TPM_LIB_ERROR;
- if (size_ptr)
- *size_ptr = response_length;
-
- return tpm_return_code(response);
-}
-
-int tpm_init(void)
-{
- int err;
- struct udevice *dev;
-
- err = uclass_first_device_err(UCLASS_TPM, &dev);
- if (err)
- return err;
- return tpm_open(dev);
-}
-
u32 tpm_startup(enum tpm_startup_type mode)
{
const u8 command[12] = {
--
2.14.1
More information about the U-Boot
mailing list