[U-Boot] [PATCH 1/2] board: move ppa firmware address in board specific kconfig
Bhaskar Upadhaya
Bhaskar.Upadhaya at nxp.com
Thu May 3 10:27:59 UTC 2018
ppa firmware address may vary depending upon different boards,
configure ppa firmware address in board specific kconfig
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya at nxp.com>
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 5 -----
board/freescale/ls1012afrdm/Kconfig | 4 ++++
board/freescale/ls1012aqds/Kconfig | 3 +++
board/freescale/ls1012ardb/Kconfig | 8 ++++++++
board/freescale/ls1043aqds/Kconfig | 4 ++++
board/freescale/ls1043ardb/Kconfig | 4 ++++
board/freescale/ls1046aqds/Kconfig | 4 ++++
board/freescale/ls1046ardb/Kconfig | 5 +++++
board/freescale/ls1088a/Kconfig | 8 ++++++++
board/freescale/ls2080a/Kconfig | 24 ++++++++++++++++++++++++
board/freescale/ls2080aqds/Kconfig | 12 ++++++++++++
board/freescale/ls2080ardb/Kconfig | 24 ++++++++++++++++++++++++
12 files changed, 100 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 7edc06d..a4d544b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -264,11 +264,6 @@ endchoice
config SYS_LS_PPA_FW_ADDR
hex "Address of PPA firmware loading from"
depends on FSL_LS_PPA
- default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
- default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
- default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
- default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
- default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
default 0x400000 if SYS_LS_PPA_FW_IN_MMC
default 0x400000 if SYS_LS_PPA_FW_IN_NAND
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
index 22d521b..fd33807 100644
--- a/board/freescale/ls1012afrdm/Kconfig
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -12,6 +12,10 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1012afrdm"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
+
if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy
diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
index c0b12ed..b702fb2 100644
--- a/board/freescale/ls1012aqds/Kconfig
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -12,6 +12,9 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1012aqds"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
if FSL_PFE
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 493d477..0b873dd 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -12,6 +12,10 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1012ardb"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
+
if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy
@@ -59,6 +63,10 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1012a2g5rdb"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
+
if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy
diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig
index 95d2888..d44b20e 100644
--- a/board/freescale/ls1043aqds/Kconfig
+++ b/board/freescale/ls1043aqds/Kconfig
@@ -12,6 +12,10 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1043aqds"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
+
source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig
index 1bab7ca..2b21222 100644
--- a/board/freescale/ls1043ardb/Kconfig
+++ b/board/freescale/ls1043ardb/Kconfig
@@ -22,6 +22,10 @@ config SYS_HAS_ARMV8_SECURE_BASE
If enabled, please also define the value for ARMV8_SECURE_BASE,
for LS1043ARDB, it could be some address in OCRAM.
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
+
source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls1046aqds/Kconfig b/board/freescale/ls1046aqds/Kconfig
index 070827d..4f604b1 100644
--- a/board/freescale/ls1046aqds/Kconfig
+++ b/board/freescale/ls1046aqds/Kconfig
@@ -12,6 +12,10 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1046aqds"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
+
source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig
index b9f2ed7..96f34da 100644
--- a/board/freescale/ls1046ardb/Kconfig
+++ b/board/freescale/ls1046ardb/Kconfig
@@ -12,5 +12,10 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1046ardb"
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x40400000
+
source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig
index 4479dd0..19fd137 100644
--- a/board/freescale/ls1088a/Kconfig
+++ b/board/freescale/ls1088a/Kconfig
@@ -12,6 +12,10 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1088aqds"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
source "board/freescale/common/Kconfig"
endif
@@ -29,5 +33,9 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls1088ardb"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls2080a/Kconfig b/board/freescale/ls2080a/Kconfig
index b503351..d5a30d6 100644
--- a/board/freescale/ls2080a/Kconfig
+++ b/board/freescale/ls2080a/Kconfig
@@ -12,6 +12,18 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls2080a_emu"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x580400000
+
+if QSPI_BOOT
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
+endif
+
source "board/freescale/common/Kconfig"
endif
@@ -30,6 +42,18 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls2080a_simu"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x580400000
+
+if QSPI_BOOT
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
+endif
+
source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls2080aqds/Kconfig b/board/freescale/ls2080aqds/Kconfig
index e2b2c8d..50acc95 100644
--- a/board/freescale/ls2080aqds/Kconfig
+++ b/board/freescale/ls2080aqds/Kconfig
@@ -13,6 +13,18 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls2080aqds"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x580400000
+
+if QSPI_BOOT
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
+endif
+
source "board/freescale/common/Kconfig"
endif
diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig
index 8f64642..ac86357 100644
--- a/board/freescale/ls2080ardb/Kconfig
+++ b/board/freescale/ls2080ardb/Kconfig
@@ -13,6 +13,18 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls2080ardb"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x580400000
+
+if QSPI_BOOT
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
+endif
+
source "board/freescale/common/Kconfig"
endif
@@ -31,6 +43,18 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ls2080ardb"
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x580400000
+
+if QSPI_BOOT
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
+endif
+
source "board/freescale/common/Kconfig"
endif
--
1.9.1
More information about the U-Boot
mailing list