[U-Boot] [PATCH 0/7] *** Qualcomm Snapdraon serial fixes***
Ramon Fried
ramon.fried at gmail.com
Sat May 12 10:15:51 UTC 2018
In my ongoing effort to get rid of LK (Qualcomm's bootloader) that runs
before U-boot, I found that there were some problems with the uart driver of
Snapdragon.
It appears that the uart only worked because the initialization was previously
done by LK.
While fixing, I also introduced a new pinctrl driver for snapdragon (currently
only enabled for APQ8016).
the pinctrl driver is used for muxing the uart pins and configure the pins IO
properties.
Ramon Fried (7):
db820c: set clk node to be probed before relocation
serial: serial_msm: fail probe if settings clocks fails
serial: serial_msm: initialize uart only before relocation
mach-snapdragon: Fix UART clock flow
mach-snapdragon: Introduce pinctrl driver
db410: added pinctrl node and serial bindings
serial: serial_msm: added pinmux & config
arch/arm/dts/dragonboard410c.dts | 14 ++
arch/arm/dts/dragonboard820c-uboot.dtsi | 14 ++
arch/arm/mach-snapdragon/Makefile | 2 +
arch/arm/mach-snapdragon/clock-apq8016.c | 23 ++-
arch/arm/mach-snapdragon/clock-apq8096.c | 4 +-
arch/arm/mach-snapdragon/clock-snapdragon.c | 17 ++-
arch/arm/mach-snapdragon/clock-snapdragon.h | 9 +-
.../mach-snapdragon/include/mach/sysmap-apq8016.h | 1 +
arch/arm/mach-snapdragon/pinctrl-apq8016.c | 162 +++++++++++++++++++++
arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 118 +++++++++++++++
arch/arm/mach-snapdragon/pinctrl-snapdragon.h | 21 +++
configs/dragonboard410c_defconfig | 5 +
drivers/serial/serial_msm.c | 30 +++-
include/dt-bindings/pinctrl/pinctrl-snapdragon.h | 22 +++
14 files changed, 423 insertions(+), 19 deletions(-)
create mode 100644 arch/arm/mach-snapdragon/pinctrl-apq8016.c
create mode 100644 arch/arm/mach-snapdragon/pinctrl-snapdragon.c
create mode 100644 arch/arm/mach-snapdragon/pinctrl-snapdragon.h
create mode 100644 include/dt-bindings/pinctrl/pinctrl-snapdragon.h
--
2.14.1
More information about the U-Boot
mailing list