[U-Boot] [PATCH] doc: rmobile: Update the README
Marek Vasut
marek.vasut at gmail.com
Tue May 1 07:30:01 UTC 2018
Synchronize the README with the current state of U-Boot, unify
the build instructions to avoid duplication.
Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
doc/README.rmobile | 76 +++++++++++++++++++++++-------------------------------
1 file changed, 32 insertions(+), 44 deletions(-)
diff --git a/doc/README.rmobile b/doc/README.rmobile
index c65cbabc70..c925305595 100644
--- a/doc/README.rmobile
+++ b/doc/README.rmobile
@@ -7,13 +7,36 @@ family contains an ARM Cortex-A9/A53/A57.
Currently the following boards are supported:
-* KMC KZM-A9-GT [3]
-* Atmark-Techno Armadillo-800-EVA [4]
-* Renesas Electronics Lager
-* Renesas Electronics Koelsch
-* Renesas Electronics Salvator-X M3
-* Renesas Electronics Salvator-XS H3 ES2.0+
-* Renesas Electronics ULCB M3 / H3 ES2.0+
+| SoC | Board | defconfig
+|===============+========================================+===================
+| R8A73A0 | KMC KZM-A9-GT [3] | kzm9g_config
+| R8A7734 | Atmark-Techno Armadillo-800-EVA [4] | armadillo-800eva_config
+|===============+========================================+===================
+| R8A7790 H2 | Renesas Electronics Lager | lager_defconfig
+| | Renesas Electronics Stout | stout_defconfig
+|---------------+----------------------------------------+-------------------
+| R8A7791 M2-W | Renesas Electronics Koelsch | koelsch_defconfig
+| | Renesas Electronics Porter | porter_defconfig
+|---------------+----------------------------------------+-------------------
+| R8A7792 V2H | Renesas Electronics Blanche | blanche_defconfig
+|---------------+----------------------------------------+-------------------
+| R8A7793 M2-N | Renesas Electronics Gose | gose_defconfig
+|---------------+----------------------------------------+-------------------
+| R8A7794 E2 | Renesas Electronics Alt | alt_defconfig
+| | Renesas Electronics Silk | silk_defconfig
+|===============+========================================+===================
+| R8A7795 H3 | Renesas Electronics Salvator-XS ES2.0+ | r8a7795_salvator-x_defconfig
+| R8A7795 H3 | Renesas Electronics ULCB ES2.0+ | r8a7795_ulcb
+|---------------+----------------------------------------+-------------------
+| R8A7796 M3-W | Renesas Electronics Salvator-X | r8a7796_salvator-x_defconfig
+| R8A7796 M3-W | Renesas Electronics ULCB | r8a7796_ulcb
+|---------------+----------------------------------------+-------------------
+| R8A77965 M3-N | Renesas Electronics Salvator-XS | r8a77965_salvator-x_defconfig
+|---------------+----------------------------------------+-------------------
+| R8A77970 V3M | Renesas Electronics Eagle | r8a77970_eagle_defconfig
+|---------------+----------------------------------------+-------------------
+| R8A77995 D3 | Renesas Electronics Draak | r8a77995_draak_defconfig
+'===============+========================================+===================
Toolchain
=========
@@ -30,49 +53,14 @@ in their package feeds.
Build
=====
-* KZM-A9-GT
+Locate defconfig in the table above. Then apply standard build procedure:
- make kzm9g_config
- make
-
-* Armadillo-800-EVA
-
- make armadillo-800eva_config
+ make <board>_defconfig
make
Note: Armadillo-800-EVA's U-Boot supports booting from SDcard only.
Please see "B.2 Appendix B Boot Specifications" in hardware manual.
-* Lager
-
- make lager_config
- make
-
-* Koelsch
-
- make koelsch_config
- make
-
-* Salvator-X M3
-
- make r8a7796_salvator-x_defconfig
- make
-
-* Salvator-XS H3 ES2.0
-
- make r8a7795_salvator-x_defconfig
- make
-
-* ULCB M3
-
- make r8a7796_ulcb_defconfig
- make
-
-* ULCB H3 ES2.0
-
- make r8a7795_ulcb_defconfig
- make
-
Links
=====
--
2.16.2
More information about the U-Boot
mailing list