[U-Boot] [PATCH v2 1/2] ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled
Chris Packham
judge.packham at gmail.com
Wed May 30 08:14:34 UTC 2018
The mach/config.h file would helpfully define CONFIG_SYS_I2C and
CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This
conflicts with the way DM_I2C works. As a transitional measure don't
automatically define these if CONFIG_DM_I2C is defined. It should be
possible to remove this once all kirkwood boards are migrated to DM.
Signed-off-by: Chris Packham <judge.packham at gmail.com>
---
Changes in v2: None
arch/arm/mach-kirkwood/include/mach/config.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index 98639114dbdd..3482944c11de 100644
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -116,7 +116,7 @@
/*
* I2C related stuff
*/
-#ifdef CONFIG_CMD_I2C
+#if defined(CONFIG_CMD_I2C) && !defined(CONFIG_DM_I2C)
#ifndef CONFIG_SYS_I2C_SOFT
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
--
2.17.0
More information about the U-Boot
mailing list