[U-Boot] [PATCH v7 00/18] Add fastboot UDP support
Lukasz Majewski
lukma at denx.de
Mon May 28 07:39:53 UTC 2018
Hi Alex, Sam,
Sam have you tested Alex patches on your HW (as you asked earlier for
the repo to fetch the code)?
Could you add Tested-by: tag?
Are there any more comments on this series?
Best regards,
Łukasz
> This series merges the fastboot UDP support from AOSP into mainline
> U-Boot.
>
> Changes in UDP behaviour from the AOSP code, so it follows the
> existing USB behaviour:
>
> - 'boot' now follows the USB code and does 'bootm
> CONFIG_FASTBOOT_BUF_ADDR'. I've added 'fastboot_bootcmd' which if set
> overrides the boot command and allows the existing UDP behaviour to
> be preserved.
> - 'continue' in UDP now exits the fastboot server rather than
> executing 'run bootcmd'
> - 'reboot-bootloader' no longer writes 'reboot-bootloader' to
> CONFIG_FASTBOOT_BUF_ADDR as its marker for the subsequent boot. The
> code which is in AOSP common/android_bootloader.c expects this
> marker, but we have prior art in the USB code using the weak function
> fastboot_set_reboot_flag
> - 'getvar' in the UDP path now supports fetching 'fastboot.' prefixed
> variables (inherited from the USB path), these override the defaults
>
> I've pushed both USB and UDP into a single consolidated protocol layer
> now I've tested it on a BeagleBone Green.
>
> Green Travis build:
> https://travis-ci.org/akiernan/u-boot/builds/383077278
>
> Changes in v7:
> - set FASTBOOT_CMD_OEM_FORMAT for all existing users of
> FASTBOOT_FLASH_MMC_DEV that also have CMD_GPT
>
> Changes in v6:
> - accomodate master change and switch dependency on imx6dl_mamoj from
> FASTBOOT to USB_FUNCTION_FASTBOOT
> - delete redundant FASTBOOT_FLASH_NAND_DEV symbol
> - add docbook comments
> - add docbook comments
> - rename fastboot_download_data() to fastboot_data_download(), rename
> fastboot_get_bytes_remaining() to fastboot_data_remaining()
> - split fastboot_data_complete() out from fastboot_data_download() so
> we can call it at the end of the transfer phase for USB
> - merged from RFC USB fastboot series
> - when entering the DATA phase ensure we actually install the correct
> handler
> - on completion of DATA call new fastboot_data_complete()
> - previous changes:
> - remove redundant version.h
> - use new fastboot_get_bytes_remaining() function
> - new
>
> Changes in v5:
> - don't depend on UDP_FUNCTION_FASTBOOT until it exists
> - squash in subsequent patch which updates defconfigs so we don't
> leave users of CONFIG_FASTBOOT without it enabled
> - fix build in drivers/fastboot when we have CONFIG_FASTBOOT without
> flash or erase and we've not yet added fb_common.c to the build
> - fix docbook formatting
> - new
> - new
> - rename CONFIG_FASTBOOT_FLASH_FILLBUF_SIZE to
> CONFIG_IMAGE_SPARSE_FILLBUF_SIZE and migrate it to Kconfig.
> - make fastboot_bytes_received/expected static and add function
> fastboot_get_bytes_remaining()
> - move fastboot_buf_addr/fastboot_buf_size/fastboot_progress_callback
> into fastboot-internal.h
> - delete redundant fb_ prefixes from statics
> - new
>
> Changes in v4:
> - add docbook comments
> - leave strcmp_l1() in USB fastboot as we don't need it in UDP path
> - add docbook comments
> - new
> - guard fb_getvar/fb_command with UDP_FUNCTION_FASTBOOT in Makefile
> - add docbook comments
> - remove parameter from fastboot_boot() since we always want
> fastboot_buf_addr (and if we're using fastboot_bootcmd then it's
> ignored)
> - split oem format into new patch
>
> Changes in v3:
> - move imply ANDROID_BOOT_IMAGE, CMD_FASTBOOT to FASTBOOT from
> USB_FUNCTION_FASTBOOT
> - add depend on USB_FUNCTION_FASTBOOT to FASTBOOT_USB_DEV
> - leave images-sparse.c in common to acommodate 2f83f21
> - refactor for changes in master
> - Merge subsequent patch for formatting response strings into this one
> - allow NULL to fastboot_okay() when there's no message to send
> - guard FASTBOOT_GPT_NAME/FASTBOOT_MBR_NAME with EFI/DOS_PARTITION
> - new
> - new
> - new
> - new
> - new
> - new
> - use FASTBOOT as our guard in Kconfig not a list of USB || UDP
> - correct mis-translation from AOSP introduced when cleaning up for
> checkpatch - we should write when buffer is not NULL, rather than
> erasing, and erase when buffer is NULL
> - use CMD_RET_USAGE from do_fastboot
> - remove do_fastboot_udp from cmd/net.c and rewrite using net_loop()
> - rename timed_send_info to fastboot_send_info, rename
> fastboot_send_info to fastboot_udp_send_info
> - replace FASTBOOT_HEADER_SIZE with sizeof(struct fastboot_header)
> - move start time into timed_send_info() rather than passing it in
> - make calls to fastboot_udp_send_info a runtime dependency, not a
> compile time one
> - set ${filesize} to size of downloaded image
> - add progress meter from USB path during download
> - add support for 'oem format' command from the USB path
> - rename 'fastbootcmd' to 'fastboot_bootcmd' to make clear that this
> is the fastboot boot command
> - make getvar implementation table driven
> - add fastboot_buf_addr, fastboot_buf_size to override buffer address
> and size
> - return correct filesystem type in getvar partition-type on MMC
> - process "fastboot." prefixed env variables in getvar first so you
> can override the normal values (this also lets you set a fs type for
> NAND devices)
> - squash subsequent patches which change this code into this one:
> - If the fastboot flash/erase commands are disabled, remove that
> support so we still build correctly.
> - Add NAND support to fastboot UDP flash/erase commands
> - If we don't have a partition name passed, report it as not found.
> - Change the behaviour of the fastboot net code such that
> "reboot-bootloader" is no longer written to
> CONFIG_FASTBOOT_BUF_ADDR for use as a marker on reboot (the AOSP code
> in common/android-bootloader.c uses this marker - this code could be
> reinstated there if that gets merged).
> - Merge USB and UDP boot code. The USB implementation stays the
> same, but UDP no longer passes an fdt. We introduce a new environment
> variable 'fastboot_bootcmd' which if set overrides the hardcoded boot
> command, setting this then allows the UDP implementation to remain
> the same. If after running 'fastboot_bootcmd' the board has not
> booted, control is returned to U-Boot and the fastboot process ends.
> - Separate the fastboot protocol handling from the fastboot UDP
> code in preparation for reusing it in the USB code.
>
> Changes in v2:
> - ensure fastboot syntax is backward compatible - 'fastboot 0' means
> 'fastboot usb 0'
>
> Alex Kiernan (18):
> fastboot: Move fastboot to drivers/fastboot
> fastboot: Refactor fastboot_okay/fail to take response
> fastboot: Extract fastboot_okay/fail to fb_common.c
> fastboot: Correct dependencies in FASTBOOT_FLASH
> fastboot: Add missing newlines
> fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME
> fastboot: Fix parameter types in _fb_nand_write
> fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag
> fastboot: Extract common definitions from USB fastboot
> fastboot: Rename public fb_ functions to fastboot_
> ti: fastboot: Move weak overrides to board files
> fs: Add fs_get_type_name to return current filesystem name
> fastboot: Migrate FASTBOOT_FLASH_NAND_TRIMFFS to Kconfig
> mmc: Separate "mmc swrite" from fastboot
> net: fastboot: Merge AOSP UDP fastboot
> fastboot: Add support for 'oem format' command
> usb: fastboot: Convert USB f_fastboot to shared fastboot
> fastboot: Update fastboot documentation
>
> arch/arm/Kconfig | 2 -
> arch/arm/mach-omap2/boot-common.c | 10 -
> arch/arm/mach-omap2/utils.c | 4 +-
> arch/arm/mach-rockchip/rk3128-board.c | 4 +-
> arch/arm/mach-rockchip/rk322x-board.c | 4 +-
> board/amazon/kc1/kc1.c | 2 +-
> board/lg/sniper/sniper.c | 2 +-
> board/ti/am57xx/board.c | 10 +
> board/ti/common/Kconfig | 1 -
> board/ti/dra7xx/evm.c | 10 +
> cmd/Kconfig | 22 +-
> cmd/fastboot.c | 91 ++++-
> cmd/mmc.c | 14 +-
> common/Makefile | 14 -
> configs/A13-OLinuXino_defconfig | 1 +
> configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 +
> configs/A20-OLinuXino-Lime2_defconfig | 1 +
> configs/A20-Olimex-SOM204-EVB-eMMC_defconfig | 1 +
> configs/A20-Olimex-SOM204-EVB_defconfig | 1 +
> configs/Bananapi_m2m_defconfig | 1 +
> configs/Cubietruck_defconfig | 1 +
> configs/Sinlinx_SinA33_defconfig | 1 +
> configs/am335x_boneblack_defconfig | 7 +-
> configs/am335x_boneblack_vboot_defconfig | 2 +-
> configs/am335x_evm_defconfig | 2 +-
> configs/am335x_evm_nor_defconfig | 2 +-
> configs/am335x_evm_norboot_defconfig | 2 +-
> configs/am335x_evm_spiboot_defconfig | 2 +-
> configs/am335x_evm_usbspl_defconfig | 2 +-
> configs/am57xx_evm_defconfig | 13 +-
> configs/am57xx_hs_evm_defconfig | 13 +-
> configs/bcm23550_w1d_defconfig | 2 +-
> configs/bcm28155_ap_defconfig | 2 +-
> configs/birdland_bav335a_defconfig | 2 +-
> configs/birdland_bav335b_defconfig | 2 +-
> configs/cgtqmx6eval_defconfig | 2 +-
> configs/chromebit_mickey_defconfig | 5 +-
> configs/chromebook_jerry_defconfig | 5 +-
> configs/chromebook_minnie_defconfig | 5 +-
> configs/dra7xx_evm_defconfig | 11 +-
> configs/dra7xx_hs_evm_defconfig | 11 +-
> configs/evb-rk3036_defconfig | 5 +-
> configs/evb-rk3128_defconfig | 9 +-
> configs/evb-rk3229_defconfig | 5 +-
> configs/evb-rk3288_defconfig | 5 +-
> configs/evb-rk3328_defconfig | 7 +-
> configs/fennec-rk3288_defconfig | 5 +-
> configs/firefly-rk3288_defconfig | 5 +-
> configs/imx6dl_mamoj_defconfig | 2 +-
> configs/kc1_defconfig | 2 +-
> configs/kylin-rk3036_defconfig | 5 +-
> configs/miqi-rk3288_defconfig | 5 +-
> configs/mx6qsabrelite_defconfig | 2 +-
> configs/mx6sabresd_defconfig | 2 +-
> configs/nitrogen6dl2g_defconfig | 2 +-
> configs/nitrogen6dl_defconfig | 2 +-
> configs/nitrogen6q2g_defconfig | 2 +-
> configs/nitrogen6q_defconfig | 2 +-
> configs/nitrogen6s1g_defconfig | 2 +-
> configs/nitrogen6s_defconfig | 2 +-
> configs/omap3_beagle_defconfig | 2 +-
> configs/omap3_evm_defconfig | 2 +-
> configs/omap3_logic_defconfig | 2 +-
> configs/parrot_r16_defconfig | 1 +
> configs/phycore-rk3288_defconfig | 5 +-
> configs/popmetal-rk3288_defconfig | 5 +-
> configs/rock2_defconfig | 5 +-
> configs/sniper_defconfig | 2 +-
> configs/stih410-b2260_defconfig | 11 +-
> configs/tbs_a711_defconfig | 1 +
> configs/tinker-rk3288_defconfig | 5 +-
> .../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 7 +-
> .../xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 2 +-
> configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 7 +-
> configs/xilinx_zynqmp_zcu102_revA_defconfig | 7 +-
> configs/xilinx_zynqmp_zcu102_revB_defconfig | 7 +-
> configs/xilinx_zynqmp_zcu106_revA_defconfig | 7 +-
> doc/README.android-fastboot | 240 +++++++-----
> drivers/Kconfig | 2 +
> drivers/Makefile | 1 +
> {cmd => drivers}/fastboot/Kconfig | 63 ++--
> drivers/fastboot/Makefile | 7 +
> drivers/fastboot/fb_command.c | 335 +++++++++++++++++
> drivers/fastboot/fb_common.c | 169 +++++++++
> drivers/fastboot/fb_getvar.c | 230 ++++++++++++
> {common => drivers/fastboot}/fb_mmc.c | 216 +++++++----
> {common => drivers/fastboot}/fb_nand.c | 69 +++-
> drivers/usb/gadget/f_fastboot.c | 347
> ++---------------- fs/fs.c |
> 13 + include/fastboot-internal.h | 36 ++
> include/fastboot.h | 137 ++++++-
> include/fb_mmc.h | 35 +-
> include/fb_nand.h | 37 +-
> include/fs.h | 10 +
> include/image-sparse.h | 4 +-
> include/net.h | 2 +-
> include/net/fastboot.h | 21 ++
> lib/Kconfig | 11 +
> lib/Makefile | 1 +
> {common => lib}/image-sparse.c | 38 +-
> net/Makefile | 1 +
> net/fastboot.c | 317 ++++++++++++++++
> net/net.c | 7 +
> scripts/config_whitelist.txt | 2 -
> 104 files changed, 2094 insertions(+), 696 deletions(-)
> rename {cmd => drivers}/fastboot/Kconfig (78%)
> create mode 100644 drivers/fastboot/Makefile
> create mode 100644 drivers/fastboot/fb_command.c
> create mode 100644 drivers/fastboot/fb_common.c
> create mode 100644 drivers/fastboot/fb_getvar.c
> rename {common => drivers/fastboot}/fb_mmc.c (62%)
> rename {common => drivers/fastboot}/fb_nand.c (71%)
> create mode 100644 include/fastboot-internal.h
> create mode 100644 include/net/fastboot.h
> rename {common => lib}/image-sparse.c (88%)
> create mode 100644 net/fastboot.c
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180528/cfa760d9/attachment-0001.sig>
More information about the U-Boot
mailing list