[U-Boot] [PATCH v10 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected

Jagan Teki jagan at amarulasolutions.com
Mon May 28 11:18:31 UTC 2018


Allwinner PHY USB code is now part of generic-phy framework,
so use it in board_usb_cable_connected.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Acked-by: Jun Nie <jun.nie at linaro.org>
---
 board/sunxi/board.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 3d364c6db5..8208989adf 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -11,8 +11,11 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <mmc.h>
 #include <axp_pmic.h>
+#include <generic-phy.h>
+#include <phy-sun4i-usb.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/display.h>
@@ -595,7 +598,35 @@ void sunxi_board_init(void)
 #ifdef CONFIG_USB_GADGET
 int g_dnl_board_usb_cable_connected(void)
 {
-	return sunxi_usb_phy_vbus_detect(0);
+	struct udevice *dev;
+	struct phy phy;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_USB_DEV_GENERIC, 0, &dev);
+	if (ret) {
+		pr_err("%s: Cannot find USB device\n", __func__);
+		return ret;
+	}
+
+	ret = generic_phy_get_by_name(dev, "usb", &phy);
+	if (ret) {
+		pr_err("failed to get %s USB PHY\n", dev->name);
+		return ret;
+	}
+
+	ret = generic_phy_init(&phy);
+	if (ret) {
+		pr_err("failed to init %s USB PHY\n", dev->name);
+		return ret;
+	}
+
+	ret = sun4i_usb_phy_vbus_detect(&phy);
+	if (ret == 1) {
+		pr_err("A charger is plugged into the OTG\n");
+		return -ENODEV;
+	}
+
+	return ret;
 }
 #endif
 
-- 
2.14.3



More information about the U-Boot mailing list