[U-Boot] [PATCH] arm: mvebu: enable sata support for clearfog

Baruch Siach baruch at tkos.co.il
Mon May 28 10:35:15 UTC 2018


From: Jon Nettleton <jon at solid-run.com>

The a38x sata interfaces run in ahci mode and can
be accessed via the scsi command.

Signed-off-by: Jon Nettleton <jon at solid-run.com>
[baruch: rebase on current upstream]
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
 configs/clearfog_defconfig | 2 ++
 include/configs/clearfog.h | 9 +++++++++
 2 files changed, 11 insertions(+)

diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
index 5e1733e11ba1..3972c31ef978 100644
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@@ -33,6 +33,7 @@ CONFIG_CMD_TIME=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_SCSI_AHCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_MV=y
@@ -44,6 +45,7 @@ CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_MVNETA=y
 CONFIG_PCI=y
+CONFIG_SCSI=y
 CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_DEBUG_UART_CLOCK=250000000
 CONFIG_DEBUG_UART_SHIFT=2
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index f57f9b21aba6..ed6f000db16b 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -62,6 +62,15 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
+/* SATA support */
+#ifdef CONFIG_SCSI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
-- 
2.17.0



More information about the U-Boot mailing list