[U-Boot] [PATCH 1/2] ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled

[Chris Packham]

The mach/config.h file would helpfully define CONFIG_SYS_I2C and
CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This
conflicts with the way DM_I2C works. As a transitional measure don't
automatically define these if CONFIG_DM_I2C is defined. It should be
possible to remove this once all kirkwood boards are migrated to DM.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 arch/arm/mach-kirkwood/include/mach/config.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index 98639114dbdd..3482944c11de 100644
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -116,7 +116,7 @@
 /*
  * I2C related stuff
  */
-#ifdef CONFIG_CMD_I2C
+#if defined(CONFIG_CMD_I2C) && !defined(CONFIG_DM_I2C)
 #ifndef CONFIG_SYS_I2C_SOFT
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
-- 
2.17.0