[U-Boot] [PATCH v2 2/5] serial: ns16550: Read reg-io-width from device tree

Alexander Graf agraf at suse.de
Thu Nov 15 18:28:16 UTC 2018



On 15.11.18 18:58, Andy Shevchenko wrote:
> Cache the value of the reg-io-width property for the future use.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> ---
>  drivers/serial/ns16550.c | 1 +
>  include/ns16550.h        | 4 +++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index f9041aa626..b51b56de9f 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -408,6 +408,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
>  
>  	plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
>  	plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);
> +	plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
>  
>  	err = clk_get_by_index(dev, 0, &clk);
>  	if (!err) {
> diff --git a/include/ns16550.h b/include/ns16550.h
> index 5fcbcd2e74..22b89e4d6d 100644
> --- a/include/ns16550.h
> +++ b/include/ns16550.h
> @@ -49,14 +49,16 @@
>   * struct ns16550_platdata - information about a NS16550 port
>   *
>   * @base:		Base register address
> + * @reg_width:		IO accesses size of registers (in bytes)
>   * @reg_shift:		Shift size of registers (0=byte, 1=16bit, 2=32bit...)
>   * @clock:		UART base clock speed in Hz
>   */
>  struct ns16550_platdata {
>  	unsigned long base;
> +	int reg_width;
>  	int reg_shift;
> -	int clock;
>  	int reg_offset;
> +	int clock;

Why move clock?

Alex

>  	u32 fcr;
>  };
>  
> 


More information about the U-Boot mailing list