[U-Boot] [PATCH 3/4] configs: wb45n_defconfig: Remove SPL

[Ben Whitten]

Hi,

A shame as these boards only really need to start NAND and
boot uboot proper. Out of interest how much is it over in the
builder?

If SPL can't be shrunk any further then fair enough and;
Acked-by: Ben Whitten <ben.whitten at lairdtech.com>

Thanks,
Ben

> -----Original Message-----
> From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On
> Behalf Of Eugen.Hristev at microchip.com
> Sent: 19 November 2018 08:23
> To: u-boot at lists.denx.de
> Cc: Nicolas.Ferre at microchip.com
> Subject: [U-Boot] [PATCH 3/4] configs: wb45n_defconfig:
> Remove SPL
> 
> Due the size of SPL being too big, remove the SPL support.
> ---8<---
> arm-linux-gnueabi-ld: SPL image too big
> --->8---
> 
> Signed-off-by: Eugen Hristev
> <eugen.hristev at microchip.com>
> ---
>  configs/wb45n_defconfig | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/configs/wb45n_defconfig
> b/configs/wb45n_defconfig
> index 9d881e5..aef4e75 100644
> --- a/configs/wb45n_defconfig
> +++ b/configs/wb45n_defconfig
> @@ -3,17 +3,11 @@ CONFIG_SYS_THUMB_BUILD=y
>  CONFIG_ARCH_AT91=y
>  CONFIG_SYS_TEXT_BASE=0x23f00000
>  CONFIG_TARGET_WB45N=y
> -CONFIG_SPL_GPIO_SUPPORT=y
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
> -CONFIG_SPL_SERIAL_SUPPORT=y
> -CONFIG_SPL=y
>  CONFIG_NR_DRAM_BANKS=1
>  CONFIG_FIT=y
> 
> CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NA
> NDFLASH"
>  CONFIG_BOOTDELAY=3
>  CONFIG_BOARD_EARLY_INIT_F=y
> -CONFIG_SPL_NAND_SUPPORT=y
>  CONFIG_HUSH_PARSER=y
>  CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_MEMTEST=y
> --
> 2.7.4
> 
> ______________________________________________
> _
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot