[U-Boot] [PATCH 11/93] arm: Remove sksimx6 board
Simon Glass
sjg at chromium.org
Mon Nov 19 15:52:51 UTC 2018
This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/mach-imx/mx6/Kconfig | 1 -
board/sks-kinkel/sksimx6/Kconfig | 11 -
board/sks-kinkel/sksimx6/MAINTAINERS | 6 -
board/sks-kinkel/sksimx6/Makefile | 2 -
board/sks-kinkel/sksimx6/sksimx6.c | 425 ---------------------------
configs/sksimx6_defconfig | 42 ---
include/configs/sksimx6.h | 96 ------
7 files changed, 583 deletions(-)
delete mode 100644 board/sks-kinkel/sksimx6/Kconfig
delete mode 100644 board/sks-kinkel/sksimx6/MAINTAINERS
delete mode 100644 board/sks-kinkel/sksimx6/Makefile
delete mode 100644 board/sks-kinkel/sksimx6/sksimx6.c
delete mode 100644 configs/sksimx6_defconfig
delete mode 100644 include/configs/sksimx6.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index fb25bc81e11..9ed827067b1 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -557,7 +557,6 @@ source "board/liebherr/display5/Kconfig"
source "board/liebherr/mccmon6/Kconfig"
source "board/logicpd/imx6/Kconfig"
source "board/seco/Kconfig"
-source "board/sks-kinkel/sksimx6/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
diff --git a/board/sks-kinkel/sksimx6/Kconfig b/board/sks-kinkel/sksimx6/Kconfig
deleted file mode 100644
index 3efdf9d8b2a..00000000000
--- a/board/sks-kinkel/sksimx6/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if TARGET_SKSIMX6
-
-config SYS_BOARD
- default "sksimx6"
-
-config SYS_VENDOR
- default "sks-kinkel"
-
-config SYS_CONFIG_NAME
- default "sksimx6"
-endif
diff --git a/board/sks-kinkel/sksimx6/MAINTAINERS b/board/sks-kinkel/sksimx6/MAINTAINERS
deleted file mode 100644
index c1527bfa5f3..00000000000
--- a/board/sks-kinkel/sksimx6/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SKS-Kinkel sksimx6
-M: Stefano Babic <sbabic at denx.de>
-S: Maintained
-F: board/sks-kinkel/sksimx6/
-F: include/configs/sksimx6.h
-F: configs/sksimx6_defconfig
diff --git a/board/sks-kinkel/sksimx6/Makefile b/board/sks-kinkel/sksimx6/Makefile
deleted file mode 100644
index 1828fadd4e8..00000000000
--- a/board/sks-kinkel/sksimx6/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-#
-obj-y := sksimx6.o
diff --git a/board/sks-kinkel/sksimx6/sksimx6.c b/board/sks-kinkel/sksimx6/sksimx6.c
deleted file mode 100644
index f6e3d4d12e0..00000000000
--- a/board/sks-kinkel/sksimx6/sksimx6.c
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Stefano Babic <sbabic at denx.de>
- */
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/video.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <spl.h>
-#include <netdev.h>
-#include <miiphy.h>
-#include <micrel.h>
-
-#include <common.h>
-#include <malloc.h>
-#include <fuse.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
- PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart1_pads[] = {
- IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const gpios_pads[] = {
- IOMUX_PADS(PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */
-};
-
-static iomux_v3_cfg_t const enet_pads[] = {
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
- MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
- MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
- MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-iomux_v3_cfg_t const enet_pads1[] = {
- /* pin 35 - 1 (PHY_AD2) on reset */
- IOMUX_PADS(PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* pin 32 - 1 - (MODE0) all */
- IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* pin 31 - 1 - (MODE1) all */
- IOMUX_PADS(PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* pin 28 - 1 - (MODE2) all */
- IOMUX_PADS(PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* pin 27 - 1 - (MODE3) all */
- IOMUX_PADS(PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
- IOMUX_PADS(PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* pin 42 PHY nRST */
- IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static int mx6_rgmii_rework(struct phy_device *phydev)
-{
-
- /* min rx data delay */
- ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
- 0x0);
- /* min tx data delay */
- ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
- 0x0);
- /* max rx/tx clock delay, min rx/tx control */
- ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
- 0xf0f0);
-
- return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- mx6_rgmii_rework(phydev);
-
- if (phydev->drv->config)
- return phydev->drv->config(phydev);
-
- return 0;
-}
-
-#define ENET_NRST IMX_GPIO_NR(1, 25)
-
-void setup_iomux_enet(void)
-{
- SETUP_IOMUX_PADS(enet_pads);
-
-}
-
-int board_eth_init(bd_t *bis)
-{
- uint32_t base = IMX_FEC_BASE;
- struct mii_dev *bus = NULL;
- struct phy_device *phydev = NULL;
- int ret;
-
- setup_iomux_enet();
-
- bus = fec_get_miibus(base, -1);
- if (!bus)
- return -EINVAL;
- /* scan phy */
- phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR),
- PHY_INTERFACE_MODE_RGMII);
-
- if (!phydev) {
- ret = -EINVAL;
- goto free_bus;
- }
- ret = fec_probe(bis, -1, base, bus, phydev);
- if (ret)
- goto free_phydev;
-
- return 0;
-
-free_phydev:
- free(phydev);
-free_bus:
- free(bus);
- return ret;
-}
-
-int board_early_init_f(void)
-{
- SETUP_IOMUX_PADS(uart1_pads);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- /* Take in reset the ATMega processor */
- SETUP_IOMUX_PADS(gpios_pads);
- gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
-}
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC2_BASE_ADDR, 0},
-};
-
-#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 0)
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- if (cfg->esdhc_base == USDHC2_BASE_ADDR)
- ret = 1;
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int ret;
-
- SETUP_IOMUX_PADS(usdhc2_pads);
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- usdhc_cfg[0].max_bus_width = 4;
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev \n");
- return ret;
- }
-
- return 0;
-}
-
-#if defined(CONFIG_SPL_BUILD)
-#include <asm/arch/mx6-ddr.h>
-
-/*
- * Driving strength:
- * 0x30 == 40 Ohm
- * 0x28 == 48 Ohm
- */
-#define IMX6SDL_DRIVE_STRENGTH 0x230
-
-
-/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
-struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
- .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
- .dram_cas = IMX6SDL_DRIVE_STRENGTH,
- .dram_ras = IMX6SDL_DRIVE_STRENGTH,
- .dram_reset = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
- .dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
- .dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
-};
-
-/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
-struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
- .grp_ddr_type = 0x000c0000,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_addds = IMX6SDL_DRIVE_STRENGTH,
- .grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
- .grp_ddrmode = 0x00020000,
- .grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
- .grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
- .grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
- .grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
- .grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
- .grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
- .grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
- .grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
-};
-
-/* MT41K128M16JT-125 */
-static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
- /* quad = 1066, duallite = 800 */
- .mem_speed = 1066,
- .density = 2,
- .width = 16,
- .banks = 8,
- .rowaddr = 14,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
- .SRT = 0,
-};
-
-static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = {
- .p0_mpwldectrl0 = 0x0043004E,
- .p0_mpwldectrl1 = 0x003D003F,
- .p1_mpwldectrl0 = 0x00230021,
- .p1_mpwldectrl1 = 0x0028003E,
- .p0_mpdgctrl0 = 0x42580250,
- .p0_mpdgctrl1 = 0x0238023C,
- .p1_mpdgctrl0 = 0x422C0238,
- .p1_mpdgctrl1 = 0x02180228,
- .p0_mprddlctl = 0x44464A46,
- .p1_mprddlctl = 0x44464A42,
- .p0_mpwrdlctl = 0x36343236,
- .p1_mpwrdlctl = 0x36343230,
-};
-
-/* DDR 64bit 1GB */
-static struct mx6_ddr_sysinfo mem_qdl = {
- .dsize = 2,
- .cs1_mirror = 0,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32,
- .ncs = 1,
- .bi_on = 1,
- .rtt_nom = 1,
- .rtt_wr = 1,
- .ralat = 5,
- .walat = 0,
- .mif3_mode = 3,
- .rst_to_cke = 0x23,
- .sde_to_rst = 0x10,
- .refsel = 1, /* Refresh cycles at 32KHz */
- .refr = 7, /* 8 refresh commands per refresh cycle */
-};
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- /* set the default clock gate to save power */
- writel(0x00C03F3F, &ccm->CCGR0);
- writel(0x0030FC03, &ccm->CCGR1);
- writel(0x0FFFC000, &ccm->CCGR2);
- writel(0x3FF00000, &ccm->CCGR3);
- writel(0x00FFF300, &ccm->CCGR4);
- writel(0xFFFFFFFF, &ccm->CCGR5);
- writel(0x000003FF, &ccm->CCGR6);
-}
-
-static void spl_dram_init(void)
-{
- if (is_cpu_type(MXC_CPU_MX6DL)) {
- mt41k128m16jt_125.mem_speed = 800;
- mem_qdl.rtt_nom = 1;
- mem_qdl.rtt_wr = 1;
-
- mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
- mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125);
- } else {
- printf("Wrong CPU for this board\n");
- return;
- }
-
- udelay(100);
-
-#ifdef CONFIG_MX6_DDRCAL
-
- /* Perform DDR DRAM calibration */
- mmdc_do_write_level_calibration(&mem_qdl);
- mmdc_do_dqs_calibration(&mem_qdl);
-#endif
-}
-
-static void check_bootcfg(void)
-{
- u32 val5, val6;
-
- fuse_sense(0, 5, &val5);
- fuse_sense(0, 6, &val6);
- /* Check if boot from MMC */
- if (val6 & 0x10) {
- puts("BT_FUSE_SEL already fused, will do nothing\n");
- return;
- }
- fuse_prog(0, 5, 0x00000840);
- /* BT_FUSE_SEL */
- fuse_prog(0, 6, 0x00000010);
-
- do_reset(NULL, 0, 0, NULL);
-}
-
-void board_init_f(ulong dummy)
-{
- ccgr_init();
-
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- gpr_init();
-
- /* iomux */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* DDR initialization */
- spl_dram_init();
-
- /* Set fuses for new boards and reboot if not set */
- check_bootcfg();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
-#endif
diff --git a/configs/sksimx6_defconfig b/configs/sksimx6_defconfig
deleted file mode 100644
index bd9cc735a88..00000000000
--- a/configs/sksimx6_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_MX6_DDRCAL=y
-CONFIG_TARGET_SKSIMX6=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
-CONFIG_BOOTDELAY=1
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SILENT_U_BOOT_ONLY=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_DM_THERMAL=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/sksimx6.h b/include/configs/sksimx6.h
deleted file mode 100644
index 4f7ec2d7e99..00000000000
--- a/include/configs/sksimx6.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) Stefano Babic <sbabic at denx.de>
- */
-
-
-#ifndef __SKSIMX6_CONFIG_H
-#define __SKSIMX6_CONFIG_H
-
-#include "mx6_common.h"
-#include "imx6_spl.h"
-
-/* Thermal */
-#define CONFIG_IMX_THERMAL
-
-/* Serial */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M)
-
-/* Ethernet */
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0x01
-
-#define CONFIG_PHY_MICREL_KSZ9021
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C2
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* Filesystem support */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_USDHC_NUM 1
-
-/* Environment organization */
-#define CONFIG_ENV_SIZE (16 * 1024)
-#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "addcons=setenv bootargs ${bootargs} " \
- "console=${console},${baudrate}\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \
- "bootcmd=run mmcboot\0" \
- "bootfile=uImage\0" \
- "bootimage=uImage\0" \
- "console=ttymxc0\0" \
- "fdt_addr_r=0x18000000\0" \
- "fdt_file=imx6dl-sks-cts.dtb\0" \
- "fdt_high=0xffffffff\0" \
- "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
- "miscargs=quiet\0" \
- "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \
- "mmcboot=if run mmcload;then " \
- "run mmcargs addcons addmisc;" \
- "bootm;fi\0" \
- "mmcload=mmc rescan;" \
- "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p1\0" \
- "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \
- "tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \
- "run nfsargs addip addcons addmisc;" \
- "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "nfsargs=setenv bootargs root=/dev/nfs " \
- "nfsroot=${serverip}:${nfsroot},v3 panic=1\0"
-
-#endif
--
2.19.1.1215.g8438c0b245-goog
More information about the U-Boot
mailing list