[U-Boot] [PATCH 04/34] spi: kirkwood: Full dm conversion
Jagan Teki
jagan at amarulasolutions.com
Tue Nov 20 12:47:44 UTC 2018
kirkwood now support dt along with platform data,
respective boards need to switch into dm for the same.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Makefile | 2 +-
drivers/spi/Makefile | 2 +-
drivers/spi/kirkwood_spi.c | 229 +++++-------------------
drivers/spi/spi.c | 4 +-
include/dm/platform_data/spi_kirkwood.h | 15 ++
5 files changed, 61 insertions(+), 191 deletions(-)
create mode 100644 include/dm/platform_data/spi_kirkwood.h
diff --git a/Makefile b/Makefile
index d06cb5c287..214f1bcdbf 100644
--- a/Makefile
+++ b/Makefile
@@ -919,7 +919,7 @@ ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
@echo "===================================================="
endif
ifeq ($(CONFIG_DM_SPI),)
-ifeq ($(CONFIG_DAVINCI_SPI),y)
+ifeq ($(filter $(CONFIG_DAVINCI_SPI) $(CONFIG_KIRKWOOD_SPI),y),y)
@echo "===================== WARNING ======================"
@echo "This board uses SPI driver from drivers/spi/ without"
@echo "enabling CONFIG_DM_SPI. Please enable CONFIG_DM_SPI"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index cf5a5cccc0..3c74418992 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -7,6 +7,7 @@
ifdef CONFIG_DM_SPI
obj-y += spi-uclass.o
obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
+obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
obj-$(CONFIG_SPI_MEM) += spi-mem.o
@@ -29,7 +30,6 @@ obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
obj-$(CONFIG_ICH_SPI) += ich.o
-obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o
obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
index 5dd1ad67cf..e9ca95697f 100644
--- a/drivers/spi/kirkwood_spi.c
+++ b/drivers/spi/kirkwood_spi.c
@@ -13,31 +13,41 @@
#include <spi.h>
#include <asm/io.h>
#include <asm/arch/soc.h>
-#ifdef CONFIG_KIRKWOOD
-#include <asm/arch/mpp.h>
-#endif
#include <asm/arch-mvebu/spi.h>
-static void _spi_cs_activate(struct kwspi_registers *reg)
+#include <dm/platform_data/spi_kirkwood.h>
+
+struct mvebu_spi_dev {
+ bool is_errata_50mhz_ac;
+};
+
+struct mvebu_spi_priv {
+ struct kwspi_registers *spireg;
+};
+
+static void spi_cs_activate(struct kwspi_registers *reg)
{
setbits_le32(®->ctrl, KWSPI_CSN_ACT);
}
-static void _spi_cs_deactivate(struct kwspi_registers *reg)
+static void spi_cs_deactivate(struct kwspi_registers *reg)
{
clrbits_le32(®->ctrl, KWSPI_CSN_ACT);
}
-static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
+static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
+ struct udevice *bus = dev->parent;
+ struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
+ struct kwspi_registers *reg = plat->spireg;
unsigned int tmpdout, tmpdin;
int tm, isread = 0;
- debug("spi_xfer: dout %p din %p bitlen %u\n", dout, din, bitlen);
+ debug("%s: dout %p din %p bitlen %u\n", __func__, dout, din, bitlen);
if (flags & SPI_XFER_BEGIN)
- _spi_cs_activate(reg);
+ spi_cs_activate(reg);
/*
* handle data in 8-bit chunks
@@ -55,8 +65,8 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
clrbits_le32(®->irq_cause, KWSPI_SMEMRDIRQ);
writel(tmpdout, ®->dout); /* Write the data out */
- debug("*** spi_xfer: ... %08x written, bitlen %d\n",
- tmpdout, bitlen);
+ debug("%s: ... %08x written, bitlen %d\n",
+ __func__, tmpdout, bitlen);
/*
* Wait for SPI transmit to get out
@@ -67,8 +77,8 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
if (readl(®->irq_cause) & KWSPI_SMEMRDIRQ) {
isread = 1;
tmpdin = readl(®->din);
- debug("spi_xfer: din %p..%08x read\n",
- din, tmpdin);
+ debug("%s: din %p..%08x read\n",
+ __func__, din, tmpdin);
if (din) {
*((u8 *)din) = (u8)tmpdin;
@@ -82,179 +92,17 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
break;
}
if (tm >= KWSPI_TIMEOUT)
- printf("*** spi_xfer: Time out during SPI transfer\n");
+ printf("%s: Time out during SPI transfer\n", __func__);
debug("loopend bitlen %d\n", bitlen);
}
if (flags & SPI_XFER_END)
- _spi_cs_deactivate(reg);
+ spi_cs_deactivate(reg);
return 0;
}
-#ifndef CONFIG_DM_SPI
-
-static struct kwspi_registers *spireg =
- (struct kwspi_registers *)MVEBU_SPI_BASE;
-
-#ifdef CONFIG_KIRKWOOD
-static u32 cs_spi_mpp_back[2];
-#endif
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct spi_slave *slave;
- u32 data;
-#ifdef CONFIG_KIRKWOOD
- static const u32 kwspi_mpp_config[2][2] = {
- { MPP0_SPI_SCn, 0 }, /* if cs == 0 */
- { MPP7_SPI_SCn, 0 } /* if cs != 0 */
- };
-#endif
-
- if (!spi_cs_is_valid(bus, cs))
- return NULL;
-
- slave = spi_alloc_slave_base(bus, cs);
- if (!slave)
- return NULL;
-
- writel(KWSPI_SMEMRDY, &spireg->ctrl);
-
- /* calculate spi clock prescaller using max_hz */
- data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10;
- data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
- data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
-
- /* program spi clock prescaller using max_hz */
- writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
- debug("data = 0x%08x\n", data);
-
- writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
- writel(KWSPI_IRQMASK, &spireg->irq_mask);
-
-#ifdef CONFIG_KIRKWOOD
- /* program mpp registers to select SPI_CSn */
- kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back);
-#endif
-
- return slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-#ifdef CONFIG_KIRKWOOD
- kirkwood_mpp_conf(cs_spi_mpp_back, NULL);
-#endif
- free(slave);
-}
-
-#if defined(CONFIG_SYS_KW_SPI_MPP)
-u32 spi_mpp_backup[4];
-#endif
-
-__attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
-{
- return 0;
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-#if defined(CONFIG_SYS_KW_SPI_MPP)
- u32 config;
- u32 spi_mpp_config[4];
-
- config = CONFIG_SYS_KW_SPI_MPP;
-
- if (config & MOSI_MPP6)
- spi_mpp_config[0] = MPP6_SPI_MOSI;
- else
- spi_mpp_config[0] = MPP1_SPI_MOSI;
-
- if (config & SCK_MPP10)
- spi_mpp_config[1] = MPP10_SPI_SCK;
- else
- spi_mpp_config[1] = MPP2_SPI_SCK;
-
- if (config & MISO_MPP11)
- spi_mpp_config[2] = MPP11_SPI_MISO;
- else
- spi_mpp_config[2] = MPP3_SPI_MISO;
-
- spi_mpp_config[3] = 0;
- spi_mpp_backup[3] = 0;
-
- /* set new spi mpp and save current mpp config */
- kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup);
-#endif
-
- return board_spi_claim_bus(slave);
-}
-
-__attribute__((weak)) void board_spi_release_bus(struct spi_slave *slave)
-{
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-#if defined(CONFIG_SYS_KW_SPI_MPP)
- kirkwood_mpp_conf(spi_mpp_backup, NULL);
-#endif
-
- board_spi_release_bus(slave);
-}
-
-#ifndef CONFIG_SPI_CS_IS_VALID
-/*
- * you can define this function board specific
- * define above CONFIG in board specific config file and
- * provide the function in board specific src file
- */
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && (cs == 0 || cs == 1);
-}
-#endif
-
-void spi_init(void)
-{
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- _spi_cs_activate(spireg);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- _spi_cs_deactivate(spireg);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- return _spi_xfer(spireg, bitlen, dout, din, flags);
-}
-
-#else
-
-/* Here now the DM part */
-
-struct mvebu_spi_dev {
- bool is_errata_50mhz_ac;
-};
-
-struct mvebu_spi_platdata {
- struct kwspi_registers *spireg;
- bool is_errata_50mhz_ac;
-};
-
-struct mvebu_spi_priv {
- struct kwspi_registers *spireg;
-};
-
static int mvebu_spi_set_speed(struct udevice *bus, uint hz)
{
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
@@ -329,15 +177,6 @@ static int mvebu_spi_set_mode(struct udevice *bus, uint mode)
return 0;
}
-static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- struct udevice *bus = dev->parent;
- struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
-
- return _spi_xfer(plat->spireg, bitlen, dout, din, flags);
-}
-
static int mvebu_spi_claim_bus(struct udevice *dev)
{
struct udevice *bus = dev->parent;
@@ -351,6 +190,17 @@ static int mvebu_spi_claim_bus(struct udevice *dev)
return 0;
}
+static const struct dm_spi_ops mvebu_spi_ops = {
+ .claim_bus = mvebu_spi_claim_bus,
+ .xfer = mvebu_spi_xfer,
+ .set_speed = mvebu_spi_set_speed,
+ .set_mode = mvebu_spi_set_mode,
+ /*
+ * cs_info is not needed, since we require all chip selects to be
+ * in the device tree explicitly
+ */
+};
+
static int mvebu_spi_probe(struct udevice *bus)
{
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
@@ -363,6 +213,7 @@ static int mvebu_spi_probe(struct udevice *bus)
return 0;
}
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
{
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
@@ -421,15 +272,17 @@ static const struct udevice_id mvebu_spi_ids[] = {
},
{ }
};
+#endif
U_BOOT_DRIVER(mvebu_spi) = {
.name = "mvebu_spi",
.id = UCLASS_SPI,
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = mvebu_spi_ids,
- .ops = &mvebu_spi_ops,
.ofdata_to_platdata = mvebu_spi_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct mvebu_spi_platdata),
+#endif
+ .ops = &mvebu_spi_ops,
.priv_auto_alloc_size = sizeof(struct mvebu_spi_priv),
.probe = mvebu_spi_probe,
};
-#endif
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ba1d1b082d..5181d5b83f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -39,7 +39,9 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
return ptr;
}
-#if !defined(CONFIG_DM_SPI) && defined(CONFIG_DAVINCI_SPI)
+#if !defined(CONFIG_DM_SPI) && \
+ defined(CONFIG_DAVINCI_SPI) || \
+ defined(CONFIG_KIRKWOOD_SPI)
void spi_cs_activate(struct spi_slave *slave)
{
}
diff --git a/include/dm/platform_data/spi_kirkwood.h b/include/dm/platform_data/spi_kirkwood.h
new file mode 100644
index 0000000000..ae9b2783a9
--- /dev/null
+++ b/include/dm/platform_data/spi_kirkwood.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan at amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __spi_kirkwood_h
+#define __spi_kirkwood_h
+
+struct mvebu_spi_platdata {
+ struct kwspi_registers *spireg;
+ bool is_errata_50mhz_ac;
+};
+
+#endif /* __spi_kirkwood_h */
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list