[U-Boot] [PATCH 04/34] spi: kirkwood: Full dm conversion
Chris Packham
judge.packham at gmail.com
Wed Nov 21 07:52:45 UTC 2018
Hi Jagan,
On Wed, Nov 21, 2018 at 2:00 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> kirkwood now support dt along with platform data,
> respective boards need to switch into dm for the same.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Makefile | 2 +-
> drivers/spi/Makefile | 2 +-
> drivers/spi/kirkwood_spi.c | 229 +++++-------------------
> drivers/spi/spi.c | 4 +-
> include/dm/platform_data/spi_kirkwood.h | 15 ++
> 5 files changed, 61 insertions(+), 191 deletions(-)
> create mode 100644 include/dm/platform_data/spi_kirkwood.h
>
> diff --git a/Makefile b/Makefile
> index d06cb5c287..214f1bcdbf 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -919,7 +919,7 @@ ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
> @echo "===================================================="
> endif
> ifeq ($(CONFIG_DM_SPI),)
> -ifeq ($(CONFIG_DAVINCI_SPI),y)
> +ifeq ($(filter $(CONFIG_DAVINCI_SPI) $(CONFIG_KIRKWOOD_SPI),y),y)
> @echo "===================== WARNING ======================"
> @echo "This board uses SPI driver from drivers/spi/ without"
> @echo "enabling CONFIG_DM_SPI. Please enable CONFIG_DM_SPI"
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index cf5a5cccc0..3c74418992 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -7,6 +7,7 @@
> ifdef CONFIG_DM_SPI
> obj-y += spi-uclass.o
> obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
> +obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
> obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
> obj-$(CONFIG_SOFT_SPI) += soft_spi.o
> obj-$(CONFIG_SPI_MEM) += spi-mem.o
> @@ -29,7 +30,6 @@ obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
> obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
> obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
> obj-$(CONFIG_ICH_SPI) += ich.o
> -obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
> obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o
> obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
> obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
> diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
> index 5dd1ad67cf..e9ca95697f 100644
> --- a/drivers/spi/kirkwood_spi.c
> +++ b/drivers/spi/kirkwood_spi.c
> @@ -13,31 +13,41 @@
> #include <spi.h>
> #include <asm/io.h>
> #include <asm/arch/soc.h>
> -#ifdef CONFIG_KIRKWOOD
> -#include <asm/arch/mpp.h>
> -#endif
> #include <asm/arch-mvebu/spi.h>
>
> -static void _spi_cs_activate(struct kwspi_registers *reg)
> +#include <dm/platform_data/spi_kirkwood.h>
> +
> +struct mvebu_spi_dev {
> + bool is_errata_50mhz_ac;
> +};
> +
> +struct mvebu_spi_priv {
> + struct kwspi_registers *spireg;
> +};
> +
> +static void spi_cs_activate(struct kwspi_registers *reg)
> {
> setbits_le32(®->ctrl, KWSPI_CSN_ACT);
> }
>
> -static void _spi_cs_deactivate(struct kwspi_registers *reg)
> +static void spi_cs_deactivate(struct kwspi_registers *reg)
> {
> clrbits_le32(®->ctrl, KWSPI_CSN_ACT);
> }
>
> -static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
> - const void *dout, void *din, unsigned long flags)
> +static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen,
> + const void *dout, void *din, unsigned long flags)
> {
> + struct udevice *bus = dev->parent;
> + struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
> + struct kwspi_registers *reg = plat->spireg;
> unsigned int tmpdout, tmpdin;
> int tm, isread = 0;
>
> - debug("spi_xfer: dout %p din %p bitlen %u\n", dout, din, bitlen);
> + debug("%s: dout %p din %p bitlen %u\n", __func__, dout, din, bitlen);
>
> if (flags & SPI_XFER_BEGIN)
> - _spi_cs_activate(reg);
> + spi_cs_activate(reg);
>
> /*
> * handle data in 8-bit chunks
> @@ -55,8 +65,8 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
>
> clrbits_le32(®->irq_cause, KWSPI_SMEMRDIRQ);
> writel(tmpdout, ®->dout); /* Write the data out */
> - debug("*** spi_xfer: ... %08x written, bitlen %d\n",
> - tmpdout, bitlen);
> + debug("%s: ... %08x written, bitlen %d\n",
> + __func__, tmpdout, bitlen);
>
> /*
> * Wait for SPI transmit to get out
> @@ -67,8 +77,8 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
> if (readl(®->irq_cause) & KWSPI_SMEMRDIRQ) {
> isread = 1;
> tmpdin = readl(®->din);
> - debug("spi_xfer: din %p..%08x read\n",
> - din, tmpdin);
> + debug("%s: din %p..%08x read\n",
> + __func__, din, tmpdin);
>
> if (din) {
> *((u8 *)din) = (u8)tmpdin;
> @@ -82,179 +92,17 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
> break;
> }
> if (tm >= KWSPI_TIMEOUT)
> - printf("*** spi_xfer: Time out during SPI transfer\n");
> + printf("%s: Time out during SPI transfer\n", __func__);
>
> debug("loopend bitlen %d\n", bitlen);
> }
>
> if (flags & SPI_XFER_END)
> - _spi_cs_deactivate(reg);
> + spi_cs_deactivate(reg);
>
> return 0;
> }
>
> -#ifndef CONFIG_DM_SPI
> -
> -static struct kwspi_registers *spireg =
> - (struct kwspi_registers *)MVEBU_SPI_BASE;
> -
> -#ifdef CONFIG_KIRKWOOD
> -static u32 cs_spi_mpp_back[2];
> -#endif
> -
> -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> - unsigned int max_hz, unsigned int mode)
> -{
> - struct spi_slave *slave;
> - u32 data;
> -#ifdef CONFIG_KIRKWOOD
> - static const u32 kwspi_mpp_config[2][2] = {
> - { MPP0_SPI_SCn, 0 }, /* if cs == 0 */
> - { MPP7_SPI_SCn, 0 } /* if cs != 0 */
> - };
> -#endif
> -
> - if (!spi_cs_is_valid(bus, cs))
> - return NULL;
> -
> - slave = spi_alloc_slave_base(bus, cs);
> - if (!slave)
> - return NULL;
> -
> - writel(KWSPI_SMEMRDY, &spireg->ctrl);
> -
> - /* calculate spi clock prescaller using max_hz */
> - data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10;
> - data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
> - data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
> -
> - /* program spi clock prescaller using max_hz */
> - writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
> - debug("data = 0x%08x\n", data);
> -
> - writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
> - writel(KWSPI_IRQMASK, &spireg->irq_mask);
> -
> -#ifdef CONFIG_KIRKWOOD
> - /* program mpp registers to select SPI_CSn */
> - kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back);
> -#endif
> -
> - return slave;
> -}
> -
> -void spi_free_slave(struct spi_slave *slave)
> -{
> -#ifdef CONFIG_KIRKWOOD
> - kirkwood_mpp_conf(cs_spi_mpp_back, NULL);
> -#endif
> - free(slave);
> -}
> -
> -#if defined(CONFIG_SYS_KW_SPI_MPP)
> -u32 spi_mpp_backup[4];
> -#endif
> -
> -__attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
> -{
> - return 0;
> -}
> -
> -int spi_claim_bus(struct spi_slave *slave)
> -{
> -#if defined(CONFIG_SYS_KW_SPI_MPP)
> - u32 config;
> - u32 spi_mpp_config[4];
> -
> - config = CONFIG_SYS_KW_SPI_MPP;
> -
> - if (config & MOSI_MPP6)
> - spi_mpp_config[0] = MPP6_SPI_MOSI;
> - else
> - spi_mpp_config[0] = MPP1_SPI_MOSI;
> -
> - if (config & SCK_MPP10)
> - spi_mpp_config[1] = MPP10_SPI_SCK;
> - else
> - spi_mpp_config[1] = MPP2_SPI_SCK;
> -
> - if (config & MISO_MPP11)
> - spi_mpp_config[2] = MPP11_SPI_MISO;
> - else
> - spi_mpp_config[2] = MPP3_SPI_MISO;
> -
> - spi_mpp_config[3] = 0;
> - spi_mpp_backup[3] = 0;
> -
> - /* set new spi mpp and save current mpp config */
> - kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup);
> -#endif
> -
> - return board_spi_claim_bus(slave);
> -}
> -
> -__attribute__((weak)) void board_spi_release_bus(struct spi_slave *slave)
> -{
> -}
> -
> -void spi_release_bus(struct spi_slave *slave)
> -{
> -#if defined(CONFIG_SYS_KW_SPI_MPP)
> - kirkwood_mpp_conf(spi_mpp_backup, NULL);
> -#endif
> -
> - board_spi_release_bus(slave);
> -}
> -
> -#ifndef CONFIG_SPI_CS_IS_VALID
> -/*
> - * you can define this function board specific
> - * define above CONFIG in board specific config file and
> - * provide the function in board specific src file
> - */
> -int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> -{
> - return bus == 0 && (cs == 0 || cs == 1);
> -}
> -#endif
> -
> -void spi_init(void)
> -{
> -}
> -
> -void spi_cs_activate(struct spi_slave *slave)
> -{
> - _spi_cs_activate(spireg);
> -}
> -
> -void spi_cs_deactivate(struct spi_slave *slave)
> -{
> - _spi_cs_deactivate(spireg);
> -}
> -
> -int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
> - const void *dout, void *din, unsigned long flags)
> -{
> - return _spi_xfer(spireg, bitlen, dout, din, flags);
> -}
> -
> -#else
> -
> -/* Here now the DM part */
> -
> -struct mvebu_spi_dev {
> - bool is_errata_50mhz_ac;
> -};
> -
> -struct mvebu_spi_platdata {
> - struct kwspi_registers *spireg;
> - bool is_errata_50mhz_ac;
> -};
> -
> -struct mvebu_spi_priv {
> - struct kwspi_registers *spireg;
> -};
> -
> static int mvebu_spi_set_speed(struct udevice *bus, uint hz)
> {
> struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
> @@ -329,15 +177,6 @@ static int mvebu_spi_set_mode(struct udevice *bus, uint mode)
> return 0;
> }
>
> -static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen,
> - const void *dout, void *din, unsigned long flags)
> -{
> - struct udevice *bus = dev->parent;
> - struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
> -
> - return _spi_xfer(plat->spireg, bitlen, dout, din, flags);
> -}
> -
> static int mvebu_spi_claim_bus(struct udevice *dev)
> {
> struct udevice *bus = dev->parent;
> @@ -351,6 +190,17 @@ static int mvebu_spi_claim_bus(struct udevice *dev)
> return 0;
> }
>
> +static const struct dm_spi_ops mvebu_spi_ops = {
> + .claim_bus = mvebu_spi_claim_bus,
> + .xfer = mvebu_spi_xfer,
> + .set_speed = mvebu_spi_set_speed,
> + .set_mode = mvebu_spi_set_mode,
> + /*
> + * cs_info is not needed, since we require all chip selects to be
> + * in the device tree explicitly
> + */
> +};
This was already added in commit 9985bdb1cea7 ("spi: kirkwood_spi.c:
Add driver model support").
> static int mvebu_spi_probe(struct udevice *bus)
> {
> struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
> @@ -363,6 +213,7 @@ static int mvebu_spi_probe(struct udevice *bus)
> return 0;
> }
>
> +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
> static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
> {
> struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
> @@ -421,15 +272,17 @@ static const struct udevice_id mvebu_spi_ids[] = {
> },
> { }
> };
> +#endif
>
> U_BOOT_DRIVER(mvebu_spi) = {
> .name = "mvebu_spi",
> .id = UCLASS_SPI,
> +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
> .of_match = mvebu_spi_ids,
> - .ops = &mvebu_spi_ops,
> .ofdata_to_platdata = mvebu_spi_ofdata_to_platdata,
> .platdata_auto_alloc_size = sizeof(struct mvebu_spi_platdata),
> +#endif
> + .ops = &mvebu_spi_ops,
> .priv_auto_alloc_size = sizeof(struct mvebu_spi_priv),
> .probe = mvebu_spi_probe,
> };
> -#endif
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index ba1d1b082d..5181d5b83f 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -39,7 +39,9 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
> return ptr;
> }
>
> -#if !defined(CONFIG_DM_SPI) && defined(CONFIG_DAVINCI_SPI)
> +#if !defined(CONFIG_DM_SPI) && \
> + defined(CONFIG_DAVINCI_SPI) || \
> + defined(CONFIG_KIRKWOOD_SPI)
> void spi_cs_activate(struct spi_slave *slave)
> {
> }
> diff --git a/include/dm/platform_data/spi_kirkwood.h b/include/dm/platform_data/spi_kirkwood.h
> new file mode 100644
> index 0000000000..ae9b2783a9
> --- /dev/null
> +++ b/include/dm/platform_data/spi_kirkwood.h
> @@ -0,0 +1,15 @@
> +/*
> + * Copyright (C) 2018 Jagan Teki <jagan at amarulasolutions.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __spi_kirkwood_h
> +#define __spi_kirkwood_h
> +
> +struct mvebu_spi_platdata {
> + struct kwspi_registers *spireg;
> + bool is_errata_50mhz_ac;
> +};
> +
> +#endif /* __spi_kirkwood_h */
> --
> 2.18.0.321.gffc6fa0e3
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
More information about the U-Boot
mailing list