[U-Boot] [PATCH 56/93] arm: Remove am335x_baltos board
Yegor Yefremov
yegorslists at googlemail.com
Tue Nov 20 14:56:08 UTC 2018
Hi Simon,
On Mon, Nov 19, 2018 at 4:55 PM Simon Glass <sjg at chromium.org> wrote:
>
> This board has not been converted to CONFIG_DM_BLK by the deadline.
> Remove it.
I've sent a fix:
https://lists.denx.de/pipermail/u-boot/2018-November/348319.html
Best Regards,
Yegor
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> arch/arm/Kconfig | 1 -
> board/vscom/baltos/Kconfig | 15 -
> board/vscom/baltos/MAINTAINERS | 6 -
> board/vscom/baltos/Makefile | 11 -
> board/vscom/baltos/README | 1 -
> board/vscom/baltos/board.c | 493 --------------------------------
> board/vscom/baltos/board.h | 34 ---
> board/vscom/baltos/mux.c | 125 --------
> board/vscom/baltos/u-boot.lds | 128 ---------
> configs/am335x_baltos_defconfig | 65 -----
> include/configs/baltos.h | 276 ------------------
> 11 files changed, 1155 deletions(-)
> delete mode 100644 board/vscom/baltos/Kconfig
> delete mode 100644 board/vscom/baltos/MAINTAINERS
> delete mode 100644 board/vscom/baltos/Makefile
> delete mode 100644 board/vscom/baltos/README
> delete mode 100644 board/vscom/baltos/board.c
> delete mode 100644 board/vscom/baltos/board.h
> delete mode 100644 board/vscom/baltos/mux.c
> delete mode 100644 board/vscom/baltos/u-boot.lds
> delete mode 100644 configs/am335x_baltos_defconfig
> delete mode 100644 include/configs/baltos.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index b1eeb39d919..6cadd96378b 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1528,7 +1528,6 @@ source "board/spear/x600/Kconfig"
> source "board/st/stv0991/Kconfig"
> source "board/tcl/sl50/Kconfig"
> source "board/ucRobotics/bubblegum_96/Kconfig"
> -source "board/vscom/baltos/Kconfig"
> source "board/woodburn/Kconfig"
> source "board/xilinx/Kconfig"
> source "board/xilinx/zynq/Kconfig"
> diff --git a/board/vscom/baltos/Kconfig b/board/vscom/baltos/Kconfig
> deleted file mode 100644
> index b721ed19d80..00000000000
> --- a/board/vscom/baltos/Kconfig
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -if TARGET_AM335X_BALTOS
> -
> -config SYS_BOARD
> - default "baltos"
> -
> -config SYS_VENDOR
> - default "vscom"
> -
> -config SYS_SOC
> - default "am33xx"
> -
> -config SYS_CONFIG_NAME
> - default "baltos"
> -
> -endif
> diff --git a/board/vscom/baltos/MAINTAINERS b/board/vscom/baltos/MAINTAINERS
> deleted file mode 100644
> index e82acfed161..00000000000
> --- a/board/vscom/baltos/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -BALTOS BOARD
> -M: Yegor Yefremov <yegorslists at googlemail.com>
> -S: Maintained
> -F: board/vscom/baltos/
> -F: include/configs/baltos.h
> -F: configs/am335x_baltos_defconfig
> diff --git a/board/vscom/baltos/Makefile b/board/vscom/baltos/Makefile
> deleted file mode 100644
> index c34b9b1dd8a..00000000000
> --- a/board/vscom/baltos/Makefile
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# Makefile
> -#
> -# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> -
> -ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
> -obj-y := mux.o
> -endif
> -
> -obj-y += board.o
> diff --git a/board/vscom/baltos/README b/board/vscom/baltos/README
> deleted file mode 100644
> index f744ace9972..00000000000
> --- a/board/vscom/baltos/README
> +++ /dev/null
> @@ -1 +0,0 @@
> -BSP for VScom OnRISC Balios family devices, like Balios iR 5221.
> diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c
> deleted file mode 100644
> index df0a2d2b7a6..00000000000
> --- a/board/vscom/baltos/board.c
> +++ /dev/null
> @@ -1,493 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * board.c
> - *
> - * Board functions for TI AM335X based boards
> - *
> - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
> - */
> -
> -#include <common.h>
> -#include <errno.h>
> -#include <linux/libfdt.h>
> -#include <spl.h>
> -#include <asm/arch/cpu.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/omap.h>
> -#include <asm/arch/ddr_defs.h>
> -#include <asm/arch/clock.h>
> -#include <asm/arch/gpio.h>
> -#include <asm/arch/mmc_host_def.h>
> -#include <asm/arch/sys_proto.h>
> -#include <asm/arch/mem.h>
> -#include <asm/arch/mux.h>
> -#include <asm/io.h>
> -#include <asm/emif.h>
> -#include <asm/gpio.h>
> -#include <i2c.h>
> -#include <miiphy.h>
> -#include <cpsw.h>
> -#include <power/tps65217.h>
> -#include <power/tps65910.h>
> -#include <environment.h>
> -#include <watchdog.h>
> -#include "board.h"
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -/* GPIO that controls power to DDR on EVM-SK */
> -#define GPIO_DDR_VTT_EN 7
> -#define DIP_S1 44
> -#define MPCIE_SW 100
> -
> -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
> -
> -static int baltos_set_console(void)
> -{
> - int val, i, dips = 0;
> - char buf[7];
> -
> - for (i = 0; i < 4; i++) {
> - sprintf(buf, "dip_s%d", i + 1);
> -
> - if (gpio_request(DIP_S1 + i, buf)) {
> - printf("failed to export GPIO %d\n", DIP_S1 + i);
> - return 0;
> - }
> -
> - if (gpio_direction_input(DIP_S1 + i)) {
> - printf("failed to set GPIO %d direction\n", DIP_S1 + i);
> - return 0;
> - }
> -
> - val = gpio_get_value(DIP_S1 + i);
> - dips |= val << i;
> - }
> -
> - printf("DIPs: 0x%1x\n", (~dips) & 0xf);
> -
> - if ((dips & 0xf) == 0xe)
> - env_set("console", "ttyUSB0,115200n8");
> -
> - return 0;
> -}
> -
> -static int read_eeprom(BSP_VS_HWPARAM *header)
> -{
> - i2c_set_bus_num(1);
> -
> - /* Check if baseboard eeprom is available */
> - if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
> - puts("Could not probe the EEPROM; something fundamentally "
> - "wrong on the I2C bus.\n");
> - return -ENODEV;
> - }
> -
> - /* read the eeprom using i2c */
> - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
> - sizeof(BSP_VS_HWPARAM))) {
> - puts("Could not read the EEPROM; something fundamentally"
> - " wrong on the I2C bus.\n");
> - return -EIO;
> - }
> -
> - if (header->Magic != 0xDEADBEEF) {
> -
> - printf("Incorrect magic number (0x%x) in EEPROM\n",
> - header->Magic);
> -
> - /* fill default values */
> - header->SystemId = 211;
> - header->MAC1[0] = 0x00;
> - header->MAC1[1] = 0x00;
> - header->MAC1[2] = 0x00;
> - header->MAC1[3] = 0x00;
> - header->MAC1[4] = 0x00;
> - header->MAC1[5] = 0x01;
> -
> - header->MAC2[0] = 0x00;
> - header->MAC2[1] = 0x00;
> - header->MAC2[2] = 0x00;
> - header->MAC2[3] = 0x00;
> - header->MAC2[4] = 0x00;
> - header->MAC2[5] = 0x02;
> -
> - header->MAC3[0] = 0x00;
> - header->MAC3[1] = 0x00;
> - header->MAC3[2] = 0x00;
> - header->MAC3[3] = 0x00;
> - header->MAC3[4] = 0x00;
> - header->MAC3[5] = 0x03;
> - }
> -
> - return 0;
> -}
> -
> -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
> -
> -static const struct ddr_data ddr3_baltos_data = {
> - .datardsratio0 = MT41K256M16HA125E_RD_DQS,
> - .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
> - .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
> - .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
> -};
> -
> -static const struct cmd_control ddr3_baltos_cmd_ctrl_data = {
> - .cmd0csratio = MT41K256M16HA125E_RATIO,
> - .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
> -
> - .cmd1csratio = MT41K256M16HA125E_RATIO,
> - .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
> -
> - .cmd2csratio = MT41K256M16HA125E_RATIO,
> - .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
> -};
> -
> -static struct emif_regs ddr3_baltos_emif_reg_data = {
> - .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
> - .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
> - .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
> - .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
> - .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
> - .zq_config = MT41K256M16HA125E_ZQ_CFG,
> - .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
> -};
> -
> -#ifdef CONFIG_SPL_OS_BOOT
> -int spl_start_uboot(void)
> -{
> - /* break into full u-boot on 'c' */
> - return (serial_tstc() && serial_getc() == 'c');
> -}
> -#endif
> -
> -#define OSC (V_OSCK/1000000)
> -const struct dpll_params dpll_ddr = {
> - 266, OSC-1, 1, -1, -1, -1, -1};
> -const struct dpll_params dpll_ddr_evm_sk = {
> - 303, OSC-1, 1, -1, -1, -1, -1};
> -const struct dpll_params dpll_ddr_baltos = {
> - 400, OSC-1, 1, -1, -1, -1, -1};
> -
> -void am33xx_spl_board_init(void)
> -{
> - int mpu_vdd;
> - int sil_rev;
> -
> - /* Get the frequency */
> - dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
> -
> - /*
> - * The GP EVM, IDK and EVM SK use a TPS65910 PMIC. For all
> - * MPU frequencies we support we use a CORE voltage of
> - * 1.1375V. For MPU voltage we need to switch based on
> - * the frequency we are running at.
> - */
> - i2c_set_bus_num(1);
> -
> - printf("I2C speed: %d Hz\n", CONFIG_SYS_OMAP24_I2C_SPEED);
> -
> - if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) {
> - puts("i2c: cannot access TPS65910\n");
> - return;
> - }
> -
> - /*
> - * Depending on MPU clock and PG we will need a different
> - * VDD to drive at that speed.
> - */
> - sil_rev = readl(&cdev->deviceid) >> 28;
> - mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev,
> - dpll_mpu_opp100.m);
> -
> - /* Tell the TPS65910 to use i2c */
> - tps65910_set_i2c_control();
> -
> - /* First update MPU voltage. */
> - if (tps65910_voltage_update(MPU, mpu_vdd))
> - return;
> -
> - /* Second, update the CORE voltage. */
> - if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_3))
> - return;
> -
> - /* Set CORE Frequencies to OPP100 */
> - do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
> -
> - /* Set MPU Frequency to what we detected now that voltages are set */
> - do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
> -
> - writel(0x000010ff, PRM_DEVICE_INST + 4);
> -}
> -
> -const struct dpll_params *get_dpll_ddr_params(void)
> -{
> - enable_i2c1_pin_mux();
> - i2c_set_bus_num(1);
> -
> - return &dpll_ddr_baltos;
> -}
> -
> -void set_uart_mux_conf(void)
> -{
> - enable_uart0_pin_mux();
> -}
> -
> -void set_mux_conf_regs(void)
> -{
> - enable_board_pin_mux();
> -}
> -
> -const struct ctrl_ioregs ioregs_baltos = {
> - .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
> - .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
> - .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
> - .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
> - .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
> -};
> -
> -void sdram_init(void)
> -{
> - gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
> - gpio_direction_output(GPIO_DDR_VTT_EN, 1);
> -
> - config_ddr(400, &ioregs_baltos,
> - &ddr3_baltos_data,
> - &ddr3_baltos_cmd_ctrl_data,
> - &ddr3_baltos_emif_reg_data, 0);
> -}
> -#endif
> -
> -/*
> - * Basic board specific setup. Pinmux has been handled already.
> - */
> -int board_init(void)
> -{
> -#if defined(CONFIG_HW_WATCHDOG)
> - hw_watchdog_init();
> -#endif
> -
> - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> -#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
> - gpmc_init();
> -#endif
> - return 0;
> -}
> -
> -int ft_board_setup(void *blob, bd_t *bd)
> -{
> - int node, ret;
> - unsigned char mac_addr[6];
> - BSP_VS_HWPARAM header;
> -
> - /* get production data */
> - if (read_eeprom(&header))
> - return 0;
> -
> - /* setup MAC1 */
> - mac_addr[0] = header.MAC1[0];
> - mac_addr[1] = header.MAC1[1];
> - mac_addr[2] = header.MAC1[2];
> - mac_addr[3] = header.MAC1[3];
> - mac_addr[4] = header.MAC1[4];
> - mac_addr[5] = header.MAC1[5];
> -
> -
> - node = fdt_path_offset(blob, "/ocp/ethernet/slave at 4a100200");
> - if (node < 0) {
> - printf("no /soc/fman/ethernet path offset\n");
> - return -ENODEV;
> - }
> -
> - ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
> - if (ret) {
> - printf("error setting local-mac-address property\n");
> - return -ENODEV;
> - }
> -
> - /* setup MAC2 */
> - mac_addr[0] = header.MAC2[0];
> - mac_addr[1] = header.MAC2[1];
> - mac_addr[2] = header.MAC2[2];
> - mac_addr[3] = header.MAC2[3];
> - mac_addr[4] = header.MAC2[4];
> - mac_addr[5] = header.MAC2[5];
> -
> - node = fdt_path_offset(blob, "/ocp/ethernet/slave at 4a100300");
> - if (node < 0) {
> - printf("no /soc/fman/ethernet path offset\n");
> - return -ENODEV;
> - }
> -
> - ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
> - if (ret) {
> - printf("error setting local-mac-address property\n");
> - return -ENODEV;
> - }
> -
> - printf("\nFDT was successfully setup\n");
> -
> - return 0;
> -}
> -
> -static struct module_pin_mux pcie_sw_pin_mux[] = {
> - {OFFSET(mii1_rxdv), (MODE(7) | PULLUDEN )}, /* GPIO3_4 */
> - {-1},
> -};
> -
> -static struct module_pin_mux dip_pin_mux[] = {
> - {OFFSET(gpmc_ad12), (MODE(7) | RXACTIVE )}, /* GPIO1_12 */
> - {OFFSET(gpmc_ad13), (MODE(7) | RXACTIVE )}, /* GPIO1_13 */
> - {OFFSET(gpmc_ad14), (MODE(7) | RXACTIVE )}, /* GPIO1_14 */
> - {OFFSET(gpmc_ad15), (MODE(7) | RXACTIVE )}, /* GPIO1_15 */
> - {-1},
> -};
> -
> -#ifdef CONFIG_BOARD_LATE_INIT
> -int board_late_init(void)
> -{
> -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> - BSP_VS_HWPARAM header;
> - char model[4];
> -
> - /* get production data */
> - if (read_eeprom(&header)) {
> - strcpy(model, "211");
> - } else {
> - sprintf(model, "%d", header.SystemId);
> - if (header.SystemId == 215) {
> - configure_module_pin_mux(dip_pin_mux);
> - baltos_set_console();
> - }
> - }
> -
> - /* turn power for the mPCIe slot */
> - configure_module_pin_mux(pcie_sw_pin_mux);
> - if (gpio_request(MPCIE_SW, "mpcie_sw")) {
> - printf("failed to export GPIO %d\n", MPCIE_SW);
> - return -ENODEV;
> - }
> - if (gpio_direction_output(MPCIE_SW, 1)) {
> - printf("failed to set GPIO %d direction\n", MPCIE_SW);
> - return -ENODEV;
> - }
> -
> - env_set("board_name", model);
> -#endif
> -
> - return 0;
> -}
> -#endif
> -
> -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
> - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
> -static void cpsw_control(int enabled)
> -{
> - /* VTP can be added here */
> -
> - return;
> -}
> -
> -static struct cpsw_slave_data cpsw_slaves[] = {
> - {
> - .slave_reg_ofs = 0x208,
> - .sliver_reg_ofs = 0xd80,
> - .phy_addr = 0,
> - },
> - {
> - .slave_reg_ofs = 0x308,
> - .sliver_reg_ofs = 0xdc0,
> - .phy_addr = 7,
> - },
> -};
> -
> -static struct cpsw_platform_data cpsw_data = {
> - .mdio_base = CPSW_MDIO_BASE,
> - .cpsw_base = CPSW_BASE,
> - .mdio_div = 0xff,
> - .channels = 8,
> - .cpdma_reg_ofs = 0x800,
> - .slaves = 2,
> - .slave_data = cpsw_slaves,
> - .active_slave = 1,
> - .ale_reg_ofs = 0xd00,
> - .ale_entries = 1024,
> - .host_port_reg_ofs = 0x108,
> - .hw_stats_reg_ofs = 0x900,
> - .bd_ram_ofs = 0x2000,
> - .mac_control = (1 << 5),
> - .control = cpsw_control,
> - .host_port_num = 0,
> - .version = CPSW_CTRL_VERSION_2,
> -};
> -#endif
> -
> -#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)) \
> - && defined(CONFIG_SPL_BUILD)) || \
> - ((defined(CONFIG_DRIVER_TI_CPSW) || \
> - defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
> - !defined(CONFIG_SPL_BUILD))
> -int board_eth_init(bd_t *bis)
> -{
> - int rv, n = 0;
> - uint8_t mac_addr[6];
> - uint32_t mac_hi, mac_lo;
> -
> - /*
> - * Note here that we're using CPSW1 since that has a 1Gbit PHY while
> - * CSPW0 has a 100Mbit PHY.
> - *
> - * On product, CPSW1 maps to port labeled WAN.
> - */
> -
> - /* try reading mac address from efuse */
> - mac_lo = readl(&cdev->macid1l);
> - mac_hi = readl(&cdev->macid1h);
> - mac_addr[0] = mac_hi & 0xFF;
> - mac_addr[1] = (mac_hi & 0xFF00) >> 8;
> - mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
> - mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
> - mac_addr[4] = mac_lo & 0xFF;
> - mac_addr[5] = (mac_lo & 0xFF00) >> 8;
> -
> -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
> - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
> - if (!env_get("ethaddr")) {
> - printf("<ethaddr> not set. Validating first E-fuse MAC\n");
> -
> - if (is_valid_ethaddr(mac_addr))
> - eth_env_set_enetaddr("ethaddr", mac_addr);
> - }
> -
> -#ifdef CONFIG_DRIVER_TI_CPSW
> - writel((GMII1_SEL_RMII | GMII2_SEL_RGMII | RGMII2_IDMODE), &cdev->miisel);
> - cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII;
> - rv = cpsw_register(&cpsw_data);
> - if (rv < 0)
> - printf("Error %d registering CPSW switch\n", rv);
> - else
> - n += rv;
> -#endif
> -
> - /*
> - *
> - * CPSW RGMII Internal Delay Mode is not supported in all PVT
> - * operating points. So we must set the TX clock delay feature
> - * in the AR8051 PHY. Since we only support a single ethernet
> - * device in U-Boot, we only do this for the first instance.
> - */
> -#define AR8051_PHY_DEBUG_ADDR_REG 0x1d
> -#define AR8051_PHY_DEBUG_DATA_REG 0x1e
> -#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
> -#define AR8051_RGMII_TX_CLK_DLY 0x100
> - const char *devname;
> - devname = miiphy_get_current_dev();
> -
> - miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_ADDR_REG,
> - AR8051_DEBUG_RGMII_CLK_DLY_REG);
> - miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_DATA_REG,
> - AR8051_RGMII_TX_CLK_DLY);
> -#endif
> - return n;
> -}
> -#endif
> diff --git a/board/vscom/baltos/board.h b/board/vscom/baltos/board.h
> deleted file mode 100644
> index 630c9bba73b..00000000000
> --- a/board/vscom/baltos/board.h
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * board.h
> - *
> - * TI AM335x boards information header
> - *
> - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
> - */
> -
> -#ifndef _BOARD_H_
> -#define _BOARD_H_
> -
> -typedef struct _BSP_VS_HWPARAM // v1.0
> -{
> - uint32_t Magic;
> - uint32_t HwRev;
> - uint32_t SerialNumber;
> - char PrdDate[11]; // as a string ie. "01.01.2006"
> - uint16_t SystemId;
> - uint8_t MAC1[6]; // internal EMAC
> - uint8_t MAC2[6]; // SMSC9514
> - uint8_t MAC3[6]; // WL1271 WLAN
> -} __attribute__ ((packed)) BSP_VS_HWPARAM;
> -
> -/*
> - * We have three pin mux functions that must exist. We must be able to enable
> - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
> - * main pinmux function that can be overridden to enable all other pinmux that
> - * is required on the board.
> - */
> -void enable_uart0_pin_mux(void);
> -void enable_i2c1_pin_mux(void);
> -void enable_board_pin_mux(void);
> -#endif
> diff --git a/board/vscom/baltos/mux.c b/board/vscom/baltos/mux.c
> deleted file mode 100644
> index 94410ae35e6..00000000000
> --- a/board/vscom/baltos/mux.c
> +++ /dev/null
> @@ -1,125 +0,0 @@
> -/*
> - * mux.c
> - *
> - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation version 2.
> - *
> - * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> - * kind, whether express or implied; without even the implied warranty
> - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include <common.h>
> -#include <asm/arch/sys_proto.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/mux.h>
> -#include <asm/io.h>
> -#include <i2c.h>
> -#include "board.h"
> -
> -static struct module_pin_mux uart0_pin_mux[] = {
> - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
> - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
> - {-1},
> -};
> -
> -static struct module_pin_mux mmc0_pin_mux[] = {
> - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
> - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
> - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
> - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
> - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
> - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
> - //{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
> - {-1},
> -};
> -
> -static struct module_pin_mux i2c1_pin_mux[] = {
> - {OFFSET(spi0_d1), (MODE(2) | RXACTIVE |
> - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
> - {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE |
> - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
> - {-1},
> -};
> -
> -static struct module_pin_mux gpio0_7_pin_mux[] = {
> - {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN)}, /* GPIO0_7 */
> - {-1},
> -};
> -
> -static struct module_pin_mux rmii1_pin_mux[] = {
> - {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RGMII1_TCTL */
> - {OFFSET(mii1_txen), MODE(1)}, /* RGMII1_TCTL */
> - {OFFSET(mii1_txd1), MODE(1)}, /* RGMII1_TCTL */
> - {OFFSET(mii1_txd0), MODE(1)}, /* RGMII1_TCTL */
> - {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RGMII1_TCTL */
> - {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RGMII1_TCTL */
> - {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RGMII1_TCTL */
> - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
> - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
> - {-1},
> -};
> -
> -static struct module_pin_mux rgmii2_pin_mux[] = {
> - {OFFSET(gpmc_a0), MODE(2)}, /* RGMII1_TCTL */
> - {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
> - {OFFSET(gpmc_a2), MODE(2)}, /* RGMII1_TD3 */
> - {OFFSET(gpmc_a3), MODE(2)}, /* RGMII1_TD2 */
> - {OFFSET(gpmc_a4), MODE(2)}, /* RGMII1_TD1 */
> - {OFFSET(gpmc_a5), MODE(2)}, /* RGMII1_TD0 */
> - {OFFSET(gpmc_a6), MODE(2)}, /* RGMII1_TCLK */
> - {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
> - {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
> - {OFFSET(gpmc_a9), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
> - {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
> - {OFFSET(gpmc_a11), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
> - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
> - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
> - {-1},
> -};
> -
> -static struct module_pin_mux nand_pin_mux[] = {
> - {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
> - {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
> - {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
> - {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
> - {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
> - {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
> - {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
> - {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
> - {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
> - {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
> - {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
> - {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
> - {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
> - {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
> - {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
> - {-1},
> -};
> -
> -void enable_uart0_pin_mux(void)
> -{
> - configure_module_pin_mux(uart0_pin_mux);
> -}
> -
> -void enable_i2c1_pin_mux(void)
> -{
> - configure_module_pin_mux(i2c1_pin_mux);
> -}
> -
> -void enable_board_pin_mux()
> -{
> - configure_module_pin_mux(i2c1_pin_mux);
> - configure_module_pin_mux(gpio0_7_pin_mux);
> - configure_module_pin_mux(rgmii2_pin_mux);
> - configure_module_pin_mux(rmii1_pin_mux);
> - configure_module_pin_mux(mmc0_pin_mux);
> -
> -#if defined(CONFIG_NAND)
> - configure_module_pin_mux(nand_pin_mux);
> -#endif
> -}
> diff --git a/board/vscom/baltos/u-boot.lds b/board/vscom/baltos/u-boot.lds
> deleted file mode 100644
> index 315ba5b99a7..00000000000
> --- a/board/vscom/baltos/u-boot.lds
> +++ /dev/null
> @@ -1,128 +0,0 @@
> -/*
> - * Copyright (c) 2004-2008 Texas Instruments
> - *
> - * (C) Copyright 2002
> - * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> -OUTPUT_ARCH(arm)
> -ENTRY(_start)
> -SECTIONS
> -{
> - . = 0x00000000;
> -
> - . = ALIGN(4);
> - .text :
> - {
> - *(.__image_copy_start)
> - *(.vectors)
> - CPUDIR/start.o (.text*)
> - board/vscom/baltos/built-in.o (.text*)
> - *(.text*)
> - }
> -
> - . = ALIGN(4);
> - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> -
> - . = ALIGN(4);
> - .data : {
> - *(.data*)
> - }
> -
> - . = ALIGN(4);
> -
> - . = .;
> -
> - . = ALIGN(4);
> - .u_boot_list : {
> - KEEP(*(SORT(.u_boot_list*)));
> - }
> -
> - . = ALIGN(4);
> -
> - .image_copy_end :
> - {
> - *(.__image_copy_end)
> - }
> -
> - .rel_dyn_start :
> - {
> - *(.__rel_dyn_start)
> - }
> -
> - .rel.dyn : {
> - *(.rel*)
> - }
> -
> - .rel_dyn_end :
> - {
> - *(.__rel_dyn_end)
> - }
> -
> - .hash : { *(.hash*) }
> -
> - .end :
> - {
> - *(.__end)
> - }
> -
> - _image_binary_end = .;
> -
> - /*
> - * Deprecated: this MMU section is used by pxa at present but
> - * should not be used by new boards/CPUs.
> - */
> - . = ALIGN(4096);
> - .mmutable : {
> - *(.mmutable)
> - }
> -
> -/*
> - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
> - * __bss_base and __bss_limit are for linker only (overlay ordering)
> - */
> -
> - .bss_start __rel_dyn_start (OVERLAY) : {
> - KEEP(*(.__bss_start));
> - __bss_base = .;
> - }
> -
> - .bss __bss_base (OVERLAY) : {
> - *(.bss*)
> - . = ALIGN(4);
> - __bss_limit = .;
> - }
> -
> - .bss_end __bss_limit (OVERLAY) : {
> - KEEP(*(.__bss_end));
> - }
> -
> - .dynsym _image_binary_end : { *(.dynsym) }
> - .dynbss : { *(.dynbss) }
> - .dynstr : { *(.dynstr*) }
> - .dynamic : { *(.dynamic*) }
> - .gnu.hash : { *(.gnu.hash) }
> - .plt : { *(.plt*) }
> - .interp : { *(.interp*) }
> - .gnu : { *(.gnu*) }
> - .ARM.exidx : { *(.ARM.exidx*) }
> -}
> diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
> deleted file mode 100644
> index a61b13b6fc9..00000000000
> --- a/configs/am335x_baltos_defconfig
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_ARCH_OMAP2PLUS=y
> -CONFIG_SPL_GPIO_SUPPORT=y
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
> -CONFIG_AM33XX=y
> -CONFIG_TARGET_AM335X_BALTOS=y
> -CONFIG_SPL_MMC_SUPPORT=y
> -CONFIG_SPL_SERIAL_SUPPORT=y
> -CONFIG_SPL=y
> -CONFIG_SPL_FAT_SUPPORT=y
> -CONFIG_SPL_LIBDISK_SUPPORT=y
> -CONFIG_DISTRO_DEFAULTS=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_OF_BOARD_SETUP=y
> -# CONFIG_USE_BOOTCOMMAND is not set
> -CONFIG_SYS_CONSOLE_INFO_QUIET=y
> -CONFIG_VERSION_VARIABLE=y
> -CONFIG_ARCH_MISC_INIT=y
> -CONFIG_SPL_EXT_SUPPORT=y
> -CONFIG_SPL_I2C_SUPPORT=y
> -CONFIG_SPL_MTD_SUPPORT=y
> -CONFIG_SPL_POWER_SUPPORT=y
> -CONFIG_SPL_WATCHDOG_SUPPORT=y
> -CONFIG_SPL_YMODEM_SUPPORT=y
> -CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_EEPROM=y
> -# CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_GPIO=y
> -CONFIG_CMD_GPT=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_NAND=y
> -CONFIG_CMD_SPI=y
> -CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_EXT4_WRITE=y
> -CONFIG_CMD_MTDPARTS=y
> -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
> -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),128k(SPL.backup1),128k(SPL.backup2),128k(SPL.backup3),1920k(u-boot),-(UBI)"
> -CONFIG_CMD_UBI=y
> -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> -CONFIG_BOOTCOUNT_LIMIT=y
> -CONFIG_SYS_OMAP24_I2C_SPEED=1000
> -CONFIG_MMC_OMAP_HS=y
> -CONFIG_NAND=y
> -CONFIG_PHY_ADDR_ENABLE=y
> -CONFIG_DRIVER_TI_CPSW=y
> -CONFIG_MII=y
> -CONFIG_SPI=y
> -CONFIG_OMAP3_SPI=y
> -CONFIG_USB=y
> -CONFIG_USB_MUSB_HOST=y
> -CONFIG_USB_MUSB_GADGET=y
> -CONFIG_USB_MUSB_DSPS=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> -CONFIG_USB_GADGET_VENDOR_NUM=0x0403
> -CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
> -CONFIG_USB_GADGET_DOWNLOAD=y
> -CONFIG_USB_ETHER=y
> -CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
> -CONFIG_FAT_WRITE=y
> -CONFIG_OF_LIBFDT=y
> diff --git a/include/configs/baltos.h b/include/configs/baltos.h
> deleted file mode 100644
> index 006b049d09d..00000000000
> --- a/include/configs/baltos.h
> +++ /dev/null
> @@ -1,276 +0,0 @@
> -/*
> - * am335x_evm.h
> - *
> - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation version 2.
> - *
> - * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> - * kind, whether express or implied; without even the implied warranty
> - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#ifndef __CONFIG_BALTOS_H
> -#define __CONFIG_BALTOS_H
> -
> -#include <linux/sizes.h>
> -#include <configs/ti_am335x_common.h>
> -
> -#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
> -
> -/* Clock Defines */
> -#define V_OSCK 24000000 /* Clock output from T2 */
> -#define V_SCLK (V_OSCK)
> -
> -/* Custom script for NOR */
> -#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds"
> -
> -/* Always 128 KiB env size */
> -#define CONFIG_ENV_SIZE (128 << 10)
> -
> -/* FIT support */
> -#define CONFIG_SYS_BOOTM_LEN SZ_64M
> -
> -/* UBI Support */
> -
> -/* I2C configuration */
> -
> -#ifdef CONFIG_NAND
> -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
> -#ifdef CONFIG_SPL_OS_BOOT
> -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
> -#endif
> -#define NANDARGS \
> - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
> - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
> - "nandargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "${mtdparts} " \
> - "root=${nandroot} " \
> - "rootfstype=${nandrootfstype}\0" \
> - "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
> - "nandrootfstype=ubifs rootwait=1\0" \
> - "nandboot=echo Booting from nand ...; " \
> - "run nandargs; " \
> - "setenv loadaddr 0x84000000; " \
> - "ubi part UBI; " \
> - "ubifsmount ubi0:kernel; " \
> - "ubifsload $loadaddr kernel-fit.itb;" \
> - "ubifsumount; " \
> - "bootm ${loadaddr}#conf${board_name}; " \
> - "if test $? -ne 0; then echo Using default FIT config; " \
> - "bootm ${loadaddr}; fi;\0"
> -#else
> -#define NANDARGS ""
> -#endif
> -
> -#ifndef CONFIG_SPL_BUILD
> -#define CONFIG_EXTRA_ENV_SETTINGS \
> - DEFAULT_LINUX_BOOT_ENV \
> - "boot_fdt=try\0" \
> - "bootpart=0:2\0" \
> - "bootdir=/boot\0" \
> - "bootfile=zImage\0" \
> - "fdtfile=undefined\0" \
> - "console=ttyO0,115200n8\0" \
> - "partitions=" \
> - "uuid_disk=${uuid_gpt_disk};" \
> - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
> - "optargs=\0" \
> - "mmcdev=0\0" \
> - "mmcroot=/dev/mmcblk0p2 ro\0" \
> - "usbroot=/dev/sda2 ro\0" \
> - "mmcrootfstype=ext4 rootwait\0" \
> - "usbrootfstype=ext4 rootwait\0" \
> - "rootpath=/export/rootfs\0" \
> - "nfsopts=nolock\0" \
> - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
> - "::off\0" \
> - "ramroot=/dev/ram0 rw\0" \
> - "ramrootfstype=ext2\0" \
> - "mmcargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "${mtdparts} " \
> - "root=${mmcroot} " \
> - "rootfstype=${mmcrootfstype}\0" \
> - "usbargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "${mtdparts} " \
> - "root=${usbroot} " \
> - "rootfstype=${usbrootfstype}\0" \
> - "spiroot=/dev/mtdblock4 rw\0" \
> - "spirootfstype=jffs2\0" \
> - "spisrcaddr=0xe0000\0" \
> - "spiimgsize=0x362000\0" \
> - "spibusno=0\0" \
> - "spiargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=${spiroot} " \
> - "rootfstype=${spirootfstype}\0" \
> - "netargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=/dev/nfs " \
> - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
> - "ip=dhcp\0" \
> - "bootenv=uEnv.txt\0" \
> - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
> - "usbloadbootenv=load usb 0:1 ${loadaddr} ${bootenv}\0" \
> - "importbootenv=echo Importing environment from mmc ...; " \
> - "env import -t $loadaddr $filesize\0" \
> - "usbimportbootenv=echo Importing environment from USB ...; " \
> - "env import -t $loadaddr $filesize\0" \
> - "ramargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=${ramroot} " \
> - "rootfstype=${ramrootfstype}\0" \
> - "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
> - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
> - "usbloadimage=load usb 0:1 ${loadaddr} kernel-fit.itb\0" \
> - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
> - "usbloados=run usbargs; " \
> - "bootm ${loadaddr}#conf${board_name}; " \
> - "if test $? -ne 0; then " \
> - "echo Using default FIT configuration; " \
> - "bootm ${loadaddr}; " \
> - "fi;\0" \
> - "mmcloados=run mmcargs; " \
> - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> - "if run loadfdt; then " \
> - "bootz ${loadaddr} - ${fdtaddr}; " \
> - "else " \
> - "if test ${boot_fdt} = try; then " \
> - "bootz; " \
> - "else " \
> - "echo WARN: Cannot load the DT; " \
> - "fi; " \
> - "fi; " \
> - "else " \
> - "bootz; " \
> - "fi;\0" \
> - "usbboot=usb reset; " \
> - "if usb storage; then " \
> - "echo USB drive found;" \
> - "if run usbloadbootenv; then " \
> - "echo Loaded environment from ${bootenv};" \
> - "run usbimportbootenv;" \
> - "fi;" \
> - "if test -n $uenvcmd; then " \
> - "echo Running uenvcmd ...;" \
> - "run uenvcmd;" \
> - "fi;" \
> - "if run usbloadimage; then " \
> - "run usbloados;" \
> - "fi;" \
> - "fi;\0" \
> - "mmcboot=mmc dev ${mmcdev}; " \
> - "if mmc rescan; then " \
> - "echo SD/MMC found on device ${mmcdev};" \
> - "if run loadbootenv; then " \
> - "echo Loaded environment from ${bootenv};" \
> - "run importbootenv;" \
> - "fi;" \
> - "if test -n $uenvcmd; then " \
> - "echo Running uenvcmd ...;" \
> - "run uenvcmd;" \
> - "fi;" \
> - "if run loadimage; then " \
> - "run mmcloados;" \
> - "fi;" \
> - "fi;\0" \
> - "spiboot=echo Booting from spi ...; " \
> - "run spiargs; " \
> - "sf probe ${spibusno}:0; " \
> - "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
> - "bootz ${loadaddr}\0" \
> - "netboot=echo Booting from network ...; " \
> - "setenv autoload no; " \
> - "dhcp; " \
> - "tftp ${loadaddr} ${bootfile}; " \
> - "tftp ${fdtaddr} ${fdtfile}; " \
> - "run netargs; " \
> - "bootz ${loadaddr} - ${fdtaddr}\0" \
> - "ramboot=echo Booting from ramdisk ...; " \
> - "run ramargs; " \
> - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
> - "findfdt=setenv fdtfile am335x-baltos.dtb\0" \
> - NANDARGS
> - /*DFUARGS*/
> -#endif
> -
> -#define CONFIG_BOOTCOMMAND \
> - "run findfdt; " \
> - "run usbboot;" \
> - "run mmcboot;" \
> - "setenv mmcdev 1; " \
> - "setenv bootpart 1:2; " \
> - "run mmcboot;" \
> - "run nandboot;"
> -
> -/* NS16550 Configuration */
> -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
> -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
> -#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
> -#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
> -#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
> -#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
> -
> -#define CONFIG_ENV_EEPROM_IS_ON_I2C
> -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
> -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> -
> -/* PMIC support */
> -#define CONFIG_POWER_TPS65910
> -
> -/* SPL */
> -#ifndef CONFIG_NOR_BOOT
> -
> -#ifdef CONFIG_NAND
> -#define CONFIG_SYS_NAND_5_ADDR_CYCLE
> -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
> - CONFIG_SYS_NAND_PAGE_SIZE)
> -#define CONFIG_SYS_NAND_PAGE_SIZE 2048
> -#define CONFIG_SYS_NAND_OOBSIZE 64
> -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
> -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
> -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
> - 10, 11, 12, 13, 14, 15, 16, 17, \
> - 18, 19, 20, 21, 22, 23, 24, 25, \
> - 26, 27, 28, 29, 30, 31, 32, 33, \
> - 34, 35, 36, 37, 38, 39, 40, 41, \
> - 42, 43, 44, 45, 46, 47, 48, 49, \
> - 50, 51, 52, 53, 54, 55, 56, 57, }
> -
> -#define CONFIG_SYS_NAND_ECCSIZE 512
> -#define CONFIG_SYS_NAND_ECCBYTES 14
> -#define CONFIG_SYS_NAND_ONFI_DETECTION
> -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
> -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
> -#endif
> -#endif
> -
> -/*
> - * USB configuration. We enable MUSB support, both for host and for
> - * gadget. We set USB0 as peripheral and USB1 as host, based on the
> - * board schematic and physical port wired to each. Then for host we
> - * add mass storage support and for gadget we add both RNDIS ethernet
> - * and DFU.
> - */
> -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
> -#define CONFIG_AM335X_USB0
> -#define CONFIG_AM335X_USB0_MODE MUSB_HOST
> -#define CONFIG_AM335X_USB1
> -#define CONFIG_AM335X_USB1_MODE MUSB_OTG
> -
> -/* Network. */
> -#define CONFIG_PHY_SMSC
> -#define CONFIG_PHY_ATHEROS
> -
> -/* NAND support */
> -#ifdef CONFIG_NAND
> -#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
> -#endif
> -
> -#endif /* ! __CONFIG_BALTOS_H */
> --
> 2.19.1.1215.g8438c0b245-goog
>
More information about the U-Boot
mailing list