[U-Boot] [PATCH v2 7/9] pinctrl: stm32: Add get_pin_muxing() ops
Patrice Chotard
patrice.chotard at st.com
Mon Oct 1 11:59:35 UTC 2018
Add get_pin_muxing() ops to obtain the pin muxing description
a given pin index.
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
Changes in v2: None
drivers/pinctrl/pinctrl_stm32.c | 77 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c
index e0bee4b97bd5..588efda8df4b 100644
--- a/drivers/pinctrl/pinctrl_stm32.c
+++ b/drivers/pinctrl/pinctrl_stm32.c
@@ -27,8 +27,34 @@ struct stm32_gpio_bank {
#define MAX_PIN_PER_BANK 16
+#define MAX_PIN_MUX_LEN 40
+static char pin_mux[MAX_PIN_MUX_LEN];
+
#define MAX_PIN_NAME_LEN 12
static char pin_name[MAX_PIN_NAME_LEN];
+#define PINMUX_MODE_COUNT 5
+static const char * const pinmux_mode[PINMUX_MODE_COUNT] = {
+ "gpio input",
+ "gpio output",
+ "analog",
+ "unknown",
+ "alt function",
+};
+
+static int stm32_pinctrl_get_af(struct udevice *dev, unsigned int offset)
+{
+ struct stm32_gpio_priv *priv = dev_get_priv(dev);
+ struct stm32_gpio_regs *regs = priv->regs;
+ u32 af;
+ u32 alt_shift = (offset % 8) * 4;
+ u32 alt_index = offset / 8;
+
+ af = (readl(®s->afr[alt_index]) &
+ GENMASK(alt_shift + 3, alt_shift)) >> alt_shift;
+
+ return af;
+}
+
static int stm32_pinctrl_get_pins_count(struct udevice *dev)
{
struct stm32_pinctrl_priv *priv = dev_get_priv(dev);
@@ -97,6 +123,56 @@ static const char *stm32_pinctrl_get_pin_name(struct udevice *dev,
return pin_name;
}
+
+static const char *stm32_pinctrl_get_pin_muxing(struct udevice *dev,
+ unsigned int selector)
+{
+ struct udevice *gpio_dev;
+ const char *label;
+ int gpio_pin;
+ int mode;
+ int af_num;
+
+ /* look up for the bank which owns the requested pin */
+ gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector);
+
+ if (!gpio_dev) {
+ snprintf(pin_mux, MAX_PIN_MUX_LEN, "Error");
+ return pin_mux;
+ }
+
+ /* translate pin-controller pin number to gpio pin number */
+ gpio_pin = selector % MAX_PIN_PER_BANK;
+
+ mode = gpio_get_raw_function(gpio_dev, gpio_pin, &label);
+
+ dev_dbg(dev, "selector = %d gpio_pin = %d mode = %d\n",
+ selector, gpio_pin, mode);
+
+ switch (mode) {
+ case GPIOF_UNKNOWN:
+ /* should never happen */
+ snprintf(pin_mux, MAX_PIN_MUX_LEN, "Error !!");
+ break;
+ case GPIOF_UNUSED:
+ snprintf(pin_mux, MAX_PIN_MUX_LEN, "%s",
+ pinmux_mode[mode]);
+ break;
+ case GPIOF_FUNC:
+ af_num = stm32_pinctrl_get_af(gpio_dev, gpio_pin);
+ snprintf(pin_mux, MAX_PIN_MUX_LEN, "%s %d",
+ pinmux_mode[mode], af_num);
+ break;
+ case GPIOF_OUTPUT:
+ case GPIOF_INPUT:
+ snprintf(pin_mux, MAX_PIN_MUX_LEN, "%s %s",
+ pinmux_mode[mode], label ? label : "");
+ break;
+ }
+
+ return pin_mux;
+}
+
int stm32_pinctrl_probe(struct udevice *dev)
{
struct stm32_pinctrl_priv *priv = dev_get_priv(dev);
@@ -308,6 +384,7 @@ static struct pinctrl_ops stm32_pinctrl_ops = {
#ifndef CONFIG_SPL_BUILD
.get_pin_name = stm32_pinctrl_get_pin_name,
.get_pins_count = stm32_pinctrl_get_pins_count,
+ .get_pin_muxing = stm32_pinctrl_get_pin_muxing,
#endif
};
--
1.9.1
More information about the U-Boot
mailing list