October 2018 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Mon Oct 1 03:03:30 UTC 2018
Ending: Wed Oct 31 21:33:14 UTC 2018
Messages: 3597

[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols AKASHI, Takahiro
[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols AKASHI, Takahiro
[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols AKASHI, Takahiro
[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols AKASHI, Takahiro
[U-Boot] efi-next: Kconfig: error: recursive dependency detected! AKASHI, Takahiro
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value Poonam Aggrwal
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value Poonam Aggrwal
[U-Boot] [PATCH][v2] armv8: lx2160ardb : Add support for LX2160ARDB platform Poonam Aggrwal
[U-Boot] [PATCH v2 0/2] Neutis N5 support Aleksandr Aleksandrov
[U-Boot] [PATCH v2 1/2] arm: new board - Emlid Neutis N5 support Aleksandr Aleksandrov
[U-Boot] [PATCH v2 2/2] sunxi MAINTAINERS: add new entry for Emlid Neutis N5 Aleksandr Aleksandrov
[U-Boot] [PATCH v3 0/2] Neutis N5 support Aleksandr Aleksandrov
[U-Boot] [PATCH v3 1/2] arm: new board - Emlid Neutis N5 support Aleksandr Aleksandrov
[U-Boot] [PATCH v3 2/2] sunxi MAINTAINERS: add new entry for Emlid Neutis N5 Aleksandr Aleksandrov
[U-Boot] [PATCH] riscv: dts: Sync to Linux Kernel ae350 dts. Andes
[U-Boot] [PATCH 1/2] riscv: configs: Separate ax25-ae350 for 32/64 bit. Andes
[U-Boot] [PATCH 2/2] riscv: dts: Add ae350_32.dts for 32 bit Andes
[U-Boot] [PATCH] board: ax25-ae350: Print board information. Andes
[U-Boot] [PATCH] riscv: cache: Implement i/dcache [status, enable, disable] Andes
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Andes
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Ang, Chee Hong
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Ang, Chee Hong
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Ang, Chee Hong
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Ang, Chee Hong
[U-Boot] [PATCH 2/2] ARM: meson: Add Khadas VIM2 board support Neil Armstrong
[U-Boot] [PATCH 1/2] ARM: meson: Add Khadas VIM2 board DT Neil Armstrong
[U-Boot] [PATCH 0/2] Add Khadas VIM2 board support Neil Armstrong
[U-Boot] [PATCH v3 00/17] riscv: Add QEMU virt board support Auer, Lukas
[U-Boot] [PATCH v3 00/17] riscv: Add QEMU virt board support Auer, Lukas
[U-Boot] [PATCH 00/30] General fixes / cleanup for RISC-V and improvements to qemu-riscv Lukas Auer
[U-Boot] [PATCH 01/30] tools: .gitignore: add prelink-riscv Lukas Auer
[U-Boot] [PATCH 02/30] riscv: ignore device tree binaries Lukas Auer
[U-Boot] [PATCH 03/30] dts: riscv: update makefile to also clean the RISC-V dts directory Lukas Auer
[U-Boot] [PATCH 04/30] riscv: rename CPU_RISCV_32/64 to match architecture names ARCH_RV32I/64I Lukas Auer
[U-Boot] [PATCH 05/30] riscv: select CONFIG_PHYS_64BIT on RV64I systems Lukas Auer
[U-Boot] [PATCH 06/30] riscv: add Kconfig entries for the C and A ISA extensions Lukas Auer
[U-Boot] [PATCH 07/30] riscv: set -march and -mabi based on the Kconfig configuration Lukas Auer
[U-Boot] [PATCH 08/30] riscv: add Kconfig entries for the code model Lukas Auer
[U-Boot] [PATCH 09/30] riscv: move target selection into separate file Lukas Auer
[U-Boot] [PATCH 10/30] riscv: enable -fdata-sections Lukas Auer
[U-Boot] [PATCH 11/30] riscv: fix use of incorrectly sized variables Lukas Auer
[U-Boot] [PATCH 12/30] riscv: make use of the barrier functions from Linux Lukas Auer
[U-Boot] [PATCH 13/30] riscv: do not reimplement generic io functions Lukas Auer
[U-Boot] [PATCH 14/30] riscv: complete the list of exception codes Lukas Auer
[U-Boot] [PATCH 15/30] riscv: treat undefined exception codes as reserved Lukas Auer
[U-Boot] [PATCH 16/30] riscv: hang on unhandled exceptions Lukas Auer
[U-Boot] [PATCH 17/30] riscv: implement the invalidate_icache_* functions Lukas Auer
[U-Boot] [PATCH 18/30] riscv: invalidate the instruction cache before jumping to Linux Lukas Auer
[U-Boot] [PATCH 19/30] riscv: fix inconsistent use of spaces and tabs in start.S Lukas Auer
[U-Boot] [PATCH 20/30] riscv: align mtvec on a 4-byte boundary Lukas Auer
[U-Boot] [PATCH 21/30] riscv: remove CONFIG_INIT_CRITICAL Lukas Auer
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Lukas Auer
[U-Boot] [PATCH 23/30] riscv: do not blindly modify the mstatus CSR Lukas Auer
[U-Boot] [PATCH 24/30] riscv: save hart ID and device tree passed by prior boot stage Lukas Auer
[U-Boot] [PATCH 25/30] riscv: qemu: use device tree passed by prior boot stage Lukas Auer
[U-Boot] [PATCH 26/30] bdinfo: riscv: print fdt_blob address Lukas Auer
[U-Boot] [PATCH 27/30] riscv: qemu: support booting Linux Lukas Auer
[U-Boot] [PATCH 28/30] riscv: align bootm implementation with that of other architectures Lukas Auer
[U-Boot] [PATCH 29/30] dm: core: add missing prototype for ofnode_read_u64 Lukas Auer
[U-Boot] [PATCH 30/30] riscv: qemu: detect and boot the kernel passed by QEMU Lukas Auer
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Auer, Lukas
[U-Boot] FW: [PATCH 02/30] riscv: ignore device tree binaries Auer, Lukas
[U-Boot] [PATCH 04/30] riscv: rename CPU_RISCV_32/64 to match architecture names ARCH_RV32I/64I Auer, Lukas
[U-Boot] [PATCH 06/30] riscv: add Kconfig entries for the C and A ISA extensions Auer, Lukas
[U-Boot] [PATCH 06/30] riscv: add Kconfig entries for the C and A ISA extensions Auer, Lukas
[U-Boot] [PATCH 07/30] riscv: set -march and -mabi based on the Kconfig configuration Auer, Lukas
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Auer, Lukas
[U-Boot] [PATCH 09/30] riscv: move target selection into separate file Auer, Lukas
[U-Boot] [PATCH 09/30] riscv: move target selection into separate file Auer, Lukas
[U-Boot] [PATCH 11/30] riscv: fix use of incorrectly sized variables Auer, Lukas
[U-Boot] [PATCH 12/30] riscv: make use of the barrier functions from Linux Auer, Lukas
[U-Boot] [PATCH 13/30] riscv: do not reimplement generic io functions Auer, Lukas
[U-Boot] [PATCH 21/30] riscv: remove CONFIG_INIT_CRITICAL Auer, Lukas
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Auer, Lukas
[U-Boot] [PATCH 29/30] dm: core: add missing prototype for ofnode_read_u64 Auer, Lukas
[U-Boot] [PATCH 26/30] bdinfo: riscv: print fdt_blob address Auer, Lukas
[U-Boot] [PATCH 00/30] General fixes / cleanup for RISC-V and improvements to qemu-riscv Auer, Lukas
[U-Boot] FW: [PATCH 18/30] riscv: invalidate the instruction cache before jumping to Linux Auer, Lukas
[U-Boot] [PATCH] riscv: cache: Implement i/dcache [status, enable, disable] Auer, Lukas
[U-Boot] [PATCH] riscv: cache: Implement i/dcache [status, enable, disable] Auer, Lukas
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Auer, Lukas
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Auer, Lukas
[U-Boot] [PATCH] riscv: cache: Implement i/dcache [status, enable, disable] Auer, Lukas
[U-Boot] [PATCH v2 00/29] General fixes / cleanup for RISC-V and improvements to qemu-riscv Lukas Auer
[U-Boot] [PATCH v2 01/29] tools: .gitignore: add prelink-riscv Lukas Auer
[U-Boot] [PATCH v2 02/29] dts: riscv: update makefile to also clean the RISC-V dts directory Lukas Auer
[U-Boot] [PATCH v2 03/29] riscv: rename CPU_RISCV_32/64 to match architecture names ARCH_RV32I/64I Lukas Auer
[U-Boot] [PATCH v2 04/29] riscv: select CONFIG_PHYS_64BIT on RV64I systems Lukas Auer
[U-Boot] [PATCH v2 05/29] riscv: add Kconfig entries for the C and A ISA extensions Lukas Auer
[U-Boot] [PATCH v2 06/29] riscv: set -march and -mabi based on the Kconfig configuration Lukas Auer
[U-Boot] [PATCH v2 07/29] riscv: add Kconfig entries for the code model Lukas Auer
[U-Boot] [PATCH v2 08/29] riscv: enable -fdata-sections Lukas Auer
[U-Boot] [PATCH v2 09/29] riscv: fix use of incorrectly sized variables Lukas Auer
[U-Boot] [PATCH v2 10/29] riscv: make use of the barrier functions from Linux Lukas Auer
[U-Boot] [PATCH v2 11/29] riscv: do not reimplement generic io functions Lukas Auer
[U-Boot] [PATCH v2 12/29] riscv: complete the list of exception codes Lukas Auer
[U-Boot] [PATCH v2 13/29] riscv: treat undefined exception codes as reserved Lukas Auer
[U-Boot] [PATCH v2 14/29] riscv: hang on unhandled exceptions Lukas Auer
[U-Boot] [PATCH v2 15/29] riscv: implement the invalidate_icache_* functions Lukas Auer
[U-Boot] [PATCH v2 16/29] riscv: invalidate the instruction cache before jumping to Linux Lukas Auer
[U-Boot] [PATCH v2 17/29] riscv: fix inconsistent use of spaces and tabs in start.S Lukas Auer
[U-Boot] [PATCH v2 18/29] riscv: align mtvec on a 4-byte boundary Lukas Auer
[U-Boot] [PATCH v2 19/29] Drop CONFIG_INIT_CRITICAL Lukas Auer
[U-Boot] [PATCH v2 20/29] riscv: remove unused labels in start.S Lukas Auer
[U-Boot] [PATCH v2 21/29] riscv: do not blindly modify the mstatus CSR Lukas Auer
[U-Boot] [PATCH v2 22/29] riscv: save hart ID and device tree passed by prior boot stage Lukas Auer
[U-Boot] [PATCH v2 23/29] riscv: qemu: use device tree passed by prior boot stage Lukas Auer
[U-Boot] [PATCH v2 24/29] riscv: store device tree passed by prior boot stage in environment Lukas Auer
[U-Boot] [PATCH v2 25/29] riscv: qemu: support booting Linux Lukas Auer
[U-Boot] [PATCH v2 26/29] riscv: align bootm implementation with that of other architectures Lukas Auer
[U-Boot] [PATCH v2 27/29] dm: core: add missing prototype for ofnode_read_u64 Lukas Auer
[U-Boot] [PATCH v2 28/29] riscv: qemu: detect and boot the kernel passed by QEMU Lukas Auer
[U-Boot] [PATCH v2 29/29] riscv: qemu: clear kernel-start/-end in device tree as workaround for BBL Lukas Auer
[U-Boot] [PATCH v2 24/29] riscv: store device tree passed by prior boot stage in environment Auer, Lukas
[U-Boot] [PATCH v2 24/29] riscv: store device tree passed by prior boot stage in environment Auer, Lukas
[U-Boot] [PATCH v2 28/29] riscv: qemu: detect and boot the kernel passed by QEMU Auer, Lukas
[U-Boot] [PATCH v2 28/29] riscv: qemu: detect and boot the kernel passed by QEMU Auer, Lukas
[U-Boot] [PATCH v2 07/29] riscv: add Kconfig entries for the code model Auer, Lukas
[U-Boot] [PATCH V5 32/32] imx: add i.MX8QXP MEK board support Stefano Babic
[U-Boot] [PATCH V5 32/32] imx: add i.MX8QXP MEK board support Stefano Babic
[U-Boot] [PATCH v3 4/4] pico-imx7d: Add USB Host support Stefano Babic
[U-Boot] [PATCH v3 3/4] pico-imx7d: Make SPL binary fit into 64kB Stefano Babic
[U-Boot] [PATCH] arm: mx5: Add LDB clock config code Stefano Babic
[U-Boot] [RESEND PATCH v2 1/2] imx: mx7: fix potential overflow in imx_ddr_size() Stefano Babic
[U-Boot] [RESEND PATCH v2 1/2] imx: mx7: fix potential overflow in imx_ddr_size() Stefano Babic
[U-Boot] Moving MX25 to SPL Stefano Babic
[U-Boot] [PATCH 0/7] Restructure the i.MX U-Boot documentation Stefano Babic
[U-Boot] Regression: vf610twr build error Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PATCH] warp7: MAINTAINERS: Add an entry for warp7_bl33_defconfig Stefano Babic
[U-Boot] [PATCH] tools: imx8image: return SUCCESS when the required files not found Stefano Babic
[U-Boot] [PATCH] tools: imx8image: return SUCCESS when the required files not found Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Stefano Babic
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx Stefano Babic
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Stefano Babic
[U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181025 Stefano Babic
[U-Boot] Pull request: u-boot-net.git master Stefano Babic
[U-Boot] uboot: Allow fw env tools to be available as library Stefano Babic
[U-Boot] [PATCH] vf610twr: Enable thumb2 for builds Stefano Babic
[U-Boot] [PATCH] arm: ti: boot: Remove environment partition Bajjuri, Praneeth
[U-Boot] [PATCH v2 6/6] driver: net: fsl-mc: Add support of multiple phys for dpmac Pankaj Bansal
[U-Boot] [PATCH v3 2/6] driver: net: fsl-mc: remove unused strcture elements Pankaj Bansal
[U-Boot] [PATCH v3 0/6] driver: net: fsl-mc: Add support of multiple phys for dpmac Pankaj Bansal
[U-Boot] [PATCH v3 1/6] driver: net: fsl-mc: modify the label name Pankaj Bansal
[U-Boot] [PATCH v3 2/6] driver: net: fsl-mc: remove unused strcture elements Pankaj Bansal
[U-Boot] [PATCH v3 3/6] driver: net: fsl-mc: fix error handing in init_phy Pankaj Bansal
[U-Boot] [PATCH v3 4/6] driver: net: fsl-mc: Modify the dpmac link detection method Pankaj Bansal
[U-Boot] [PATCH v3 5/6] driver: net: fsl-mc: initialize dpmac irrespective of phy Pankaj Bansal
[U-Boot] [PATCH v3 6/6] driver: net: fsl-mc: Add support of multiple phys for dpmac Pankaj Bansal
[U-Boot] [PATCH v3 0/6] driver: net: fsl-mc: Add support of multiple phys for dpmac Pankaj Bansal
[U-Boot] [PATCH v3 1/6] driver: net: fsl-mc: modify the label name Pankaj Bansal
[U-Boot] [PATCH v3 2/6] driver: net: fsl-mc: remove unused strcture elements Pankaj Bansal
[U-Boot] [PATCH v3 3/6] driver: net: fsl-mc: fix error handing in init_phy Pankaj Bansal
[U-Boot] [PATCH v3 4/6] driver: net: fsl-mc: Modify the dpmac link detection method Pankaj Bansal
[U-Boot] [PATCH v3 5/6] driver: net: fsl-mc: initialize dpmac irrespective of phy Pankaj Bansal
[U-Boot] [PATCH v3 6/6] driver: net: fsl-mc: Add support of multiple phys for dpmac Pankaj Bansal
[U-Boot] [PATCH] armv8: lx2160aqds : Add support for LX2160AQDS platform Pankaj Bansal
[U-Boot] [PATCH] armv8: lx2160aqds : Add support for LX2160AQDS platform Pankaj Bansal
[U-Boot] [PATCH v2] armv8: fsl-layerscape: reorder rgmii dpmacs' enablement Pankaj Bansal
[U-Boot] [PATCH v2] armv8: lx2160aqds : Add support for LX2160AQDS platform Pankaj Bansal
[U-Boot] [PATCH 1/3] pci: layerscape: Modify the EP and RC mode judge method Xiaowei Bao
[U-Boot] [PATCH 2/3] pci: layerscape: Do not scan when PEX work in EP mode Xiaowei Bao
[U-Boot] [PATCH 3/3] pci: layerscape: Add the dts fixup for EP and RC Xiaowei Bao
[U-Boot] latest kwboot Balanga Bar
[U-Boot] latest kwboot Balanga Bar
[U-Boot] [PATCH] fs: btrfs: Fix tree traversal with btrfs_next_slot() Marek Behún
[U-Boot] [PATCH] fs: btrfs: Fix tree traversal with btrfs_next_slot() Marek Behún
[U-Boot] [PATCH] fs: btrfs: Fix cache alignment bugs Marek Behún
[U-Boot] [PATCH] fs: btrfs: Fix cache alignment bugs Marek Behún
[U-Boot] sunxi: add custom board Giulio Benetti
[U-Boot] sunxi: add custom board Giulio Benetti
[U-Boot] sunxi: add custom board Giulio Benetti
[U-Boot] [PATCH 00/53] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH 01/53] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH 02/53] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH 03/53] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [PATCH 04/53] env: nand: remove unnecessary env_ptr definition Rajesh Bhagat
[U-Boot] [PATCH 05/53] armv8: layerscape: add TFABOOT config option Rajesh Bhagat
[U-Boot] [PATCH 06/53] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [PATCH 07/53] armv8: ls1046ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 08/53] armv8: ls1046aqds: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 09/53] armv8: ls1046a: make environment address and size common Rajesh Bhagat
[U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 11/53] armv8: ls1043aqds: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 12/53] armv8: ls1043a: make environment address and size common Rajesh Bhagat
[U-Boot] [PATCH 13/53] armv8: ls1043aqds: define environment address for QSPI boot Rajesh Bhagat
[U-Boot] [PATCH 14/53] armv8: ls1046aqds: define environment address for QSPI boot. Rajesh Bhagat
[U-Boot] [PATCH 15/53] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH 16/53] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH 17/53] armv8: ls1046a: make FMAN address common Rajesh Bhagat
[U-Boot] [PATCH 18/53] armv8: ls1043a: make FMAN and QE address common Rajesh Bhagat
[U-Boot] [PATCH 19/53] armv8: fsl-layerscape: bootcmd identification for TFABOOT. Rajesh Bhagat
[U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 21/53] armv8: ls1043a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 22/53] armv8: ls1012ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 23/53] armv8: ls1012aqds: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 24/53] armv8: ls1012a: update environment address for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 25/53] armv8: ls1012a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 27/53] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 28/53] armv8: layerscape: secure boot support for environment selection Rajesh Bhagat
[U-Boot] [PATCH 29/53] armv8: layerscape: add SMC calls for DDR size and bank info. Rajesh Bhagat
[U-Boot] [PATCH 30/53] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 00/53] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH 01/53] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH 02/53] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH 03/53] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [PATCH 04/53] env: nand: remove unnecessary env_ptr definition Rajesh Bhagat
[U-Boot] [PATCH 05/53] armv8: layerscape: add TFABOOT config option Rajesh Bhagat
[U-Boot] [PATCH 06/53] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [PATCH 07/53] armv8: ls1046ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 08/53] armv8: ls1046aqds: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 09/53] armv8: ls1046a: make environment address and size common Rajesh Bhagat
[U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 11/53] armv8: ls1043aqds: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 12/53] armv8: ls1043a: make environment address and size common Rajesh Bhagat
[U-Boot] [PATCH 13/53] armv8: ls1043aqds: define environment address for QSPI boot Rajesh Bhagat
[U-Boot] [PATCH 14/53] armv8: ls1046aqds: define environment address for QSPI boot. Rajesh Bhagat
[U-Boot] [PATCH 15/53] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH 16/53] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH 17/53] armv8: ls1046a: make FMAN address common Rajesh Bhagat
[U-Boot] [PATCH 18/53] armv8: ls1043a: make FMAN and QE address common Rajesh Bhagat
[U-Boot] [PATCH 19/53] armv8: fsl-layerscape: bootcmd identification for TFABOOT. Rajesh Bhagat
[U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 21/53] armv8: ls1043a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 22/53] armv8: ls1012ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 23/53] armv8: ls1012aqds: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 24/53] armv8: ls1012a: update environment address for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 25/53] armv8: ls1012a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 27/53] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 28/53] armv8: layerscape: secure boot support for environment selection Rajesh Bhagat
[U-Boot] [PATCH 29/53] armv8: layerscape: add SMC calls for DDR size and bank info. Rajesh Bhagat
[U-Boot] [PATCH 30/53] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 31/53] armv8: ls1043ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH 32/53] armv8: ls1043aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH 33/53] armv8: ls1046ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH 34/53] armv8: ls1046aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH 35/53] armv8: ls1012ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH 36/53] armv8: ls1012aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH 37/53] armv8: ls1012ardb: Make U-Boot EL2 safe Rajesh Bhagat
[U-Boot] [PATCH 38/53] armv8: ls1012aqds: Make U-Boot EL2 safe Rajesh Bhagat
[U-Boot] [PATCH 39/53] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
[U-Boot] [PATCH 40/53] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
[U-Boot] [PATCH 41/53] armv8: ls1012afrwy: correct environment offset Rajesh Bhagat
[U-Boot] [PATCH 42/53] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
[U-Boot] [PATCH 43/53] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
[U-Boot] [PATCH 44/53] drivers: ifc: add support for for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 45/53] armv8: ls1046aqds: make IFC params common and dynamic Rajesh Bhagat
[U-Boot] [PATCH 46/53] armv8: ls1043ardb: make IFC params common and dynamic Rajesh Bhagat
[U-Boot] [PATCH 47/53] armv8: ls1043aqds: make IFC params common and dynamic Rajesh Bhagat
[U-Boot] [PATCH 48/53] armv8: ls1012a: fix ls1012aqds secure boot compilation Rajesh Bhagat
[U-Boot] [PATCH 49/53] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
[U-Boot] [PATCH 50/53] armv8: ls1043aqds: add i2c QIXIS support for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 51/53] armv8: ls1046aqds: add i2c QIXIS support for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 52/53] armv8: fsl-layerscape: add support of MC framework for TFA. Rajesh Bhagat
[U-Boot] [PATCH 53/53] armv8: skip setenv if gd->env_addr is not default env. Rajesh Bhagat
[U-Boot] [PATCH 07/53] armv8: ls1046ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 09/53] armv8: ls1046a: make environment address and size common Rajesh Bhagat
[U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig Rajesh Bhagat
[U-Boot] [PATCH 13/53] armv8: ls1043aqds: define environment address for QSPI boot Rajesh Bhagat
[U-Boot] [PATCH 15/53] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH 16/53] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH 18/53] armv8: ls1043a: make FMAN and QE address common Rajesh Bhagat
[U-Boot] [PATCH 19/53] armv8: fsl-layerscape: bootcmd identification for TFABOOT. Rajesh Bhagat
[U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH 29/53] armv8: layerscape: add SMC calls for DDR size and bank info. Rajesh Bhagat
[U-Boot] [PATCH v2 00/33] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH v2 01/33] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH v2 02/33] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH v2 03/33] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [PATCH v2 04/33] env: nand: remove unnecessary env_ptr definition Rajesh Bhagat
[U-Boot] [PATCH v2 05/33] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
[U-Boot] [PATCH v2 06/33] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
[U-Boot] [PATCH v2 07/33] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
[U-Boot] [PATCH v2 08/33] drivers: ifc: dynamic chipselect mapping support Rajesh Bhagat
[U-Boot] [PATCH v2 09/33] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [PATCH v2 10/33] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 11/33] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 12/33] armv8: layerscape: secure boot support for environment selection Rajesh Bhagat
[U-Boot] [PATCH v2 13/33] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
[U-Boot] [PATCH v2 14/33] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 15/33] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
[U-Boot] [PATCH v2 16/33] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
[U-Boot] [PATCH v2 17/33] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
[U-Boot] [PATCH v2 18/33] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 19/33] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 20/33] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 21/33] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 22/33] armv8: ls1046ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 23/33] armv8: ls1046aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 24/33] armv8: ls1046aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 25/33] armv8: ls1043ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 26/33] armv8: ls1043ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 27/33] armv8: ls1043aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 28/33] armv8: ls1043aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 29/33] armv8: ls1012ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 00/33] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH v2 01/33] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH v2 02/33] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH v2 03/33] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [PATCH v2 04/33] env: nand: remove unnecessary env_ptr definition Rajesh Bhagat
[U-Boot] [PATCH v2 05/33] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
[U-Boot] [PATCH v2 06/33] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
[U-Boot] [PATCH v2 07/33] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
[U-Boot] [PATCH v2 08/33] drivers: ifc: dynamic chipselect mapping support Rajesh Bhagat
[U-Boot] [PATCH v2 09/33] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [PATCH v2 10/33] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 11/33] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 12/33] armv8: layerscape: secure boot support for environment selection Rajesh Bhagat
[U-Boot] [PATCH v2 13/33] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
[U-Boot] [PATCH v2 14/33] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 15/33] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
[U-Boot] [PATCH v2 16/33] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
[U-Boot] [PATCH v2 17/33] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
[U-Boot] [PATCH v2 18/33] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 19/33] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 20/33] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 21/33] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 22/33] armv8: ls1046ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 23/33] armv8: ls1046aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 24/33] armv8: ls1046aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 25/33] armv8: ls1043ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 26/33] armv8: ls1043ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 27/33] armv8: ls1043aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 28/33] armv8: ls1043aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 29/33] armv8: ls1012ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 30/33] armv8: ls1012ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 31/33] armv8: ls1012aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 32/33] armv8: ls1012aqds: Add TFABOOT defconfig for secure boot Rajesh Bhagat
[U-Boot] [PATCH v2 33/33] armv8: ls1012a: fix ls1012aqds secure boot compilation Rajesh Bhagat
[U-Boot] [PATCH v2 00/33] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH v2 21/33] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v2 01/33] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH v2 10/33] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v2 00/33] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH v3 01/28] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH v3 02/28] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH v3 03/28] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [PATCH v3 04/28] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
[U-Boot] [PATCH v3 05/28] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
[U-Boot] [PATCH v3 06/28] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
[U-Boot] [PATCH v3 07/28] drivers: ifc: dynamic chipselect mapping support Rajesh Bhagat
[U-Boot] [PATCH v3 08/28] armv8: layerscape: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 09/28] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [PATCH v3 10/28] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v3 11/28] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v3 12/28] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
[U-Boot] [PATCH v3 13/28] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v3 14/28] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
[U-Boot] [PATCH v3 15/28] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
[U-Boot] [PATCH v3 16/28] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v3 17/28] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 18/28] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 19/28] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
[U-Boot] [PATCH v3 20/28] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 21/28] armv8: ls1046aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 22/28] armv8: ls1043ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 23/28] armv8: ls1043aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 24/28] armv8: ls1012ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 25/28] armv8: ls1012aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v3 26/28] armv8: ls1012a: fix secure boot compilation Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 00/26] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 01/26] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 02/26] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 03/26] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 04/26] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 05/26] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 06/26] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 07/26] drivers: ifc: dynamic chipselect mapping support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 08/26] armv8: layerscape: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 09/26] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 10/26] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 11/26] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 12/26] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 13/26] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 14/26] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 15/26] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 16/26] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 17/26] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 18/26] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 19/26] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 20/26] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 21/26] armv8: ls1046aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 22/26] armv8: ls1043ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 23/26] armv8: ls1043aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 24/26] armv8: ls1012ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 25/26] armv8: ls1012aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 26/26] armv8: ls1012a: fix secure boot compilation Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 24/26] armv8: ls1012ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [RESEND PATCH v3 25/26] armv8: ls1012aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 00/27] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH v4 01/27] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH v4 02/27] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH v4 03/27] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [PATCH v4 04/27] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
[U-Boot] [PATCH v4 05/27] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
[U-Boot] [PATCH v4 06/27] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
[U-Boot] [PATCH v4 07/27] drivers: ifc: dynamic chipselect mapping support Rajesh Bhagat
[U-Boot] [PATCH v4 08/27] armv8: layerscape: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 09/27] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [PATCH v4 10/27] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v4 11/27] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v4 12/27] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
[U-Boot] [PATCH v4 13/27] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v4 14/27] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
[U-Boot] [PATCH v4 15/27] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
[U-Boot] [PATCH v4 16/27] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v4 17/27] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 18/27] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 19/27] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
[U-Boot] [PATCH v4 20/27] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 21/27] armv8: ls1046aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 22/27] armv8: ls1043ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 23/27] armv8: ls1043aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 24/27] armv8: ls1012ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 25/27] armv8: ls1012aqds: fix secure boot compilation Rajesh Bhagat
[U-Boot] [PATCH v4 26/27] armv8: ls1012aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 27/27] armv8: ls1012afrx: Add TFABOOT support Rajesh Bhagat
[U-Boot] Facing issue while building multiple environments in Kconfig Rajesh Bhagat
[U-Boot] [PATCH v4 18/27] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v4 02/27] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH v5 00/27] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
[U-Boot] [PATCH v5 01/27] move data structure out of cpu.h Rajesh Bhagat
[U-Boot] [PATCH v5 02/27] env: allow flash and nand env driver to compile together Rajesh Bhagat
[U-Boot] [PATCH v5 03/27] env: sf: define API to override sf environment address Rajesh Bhagat
[U-Boot] [PATCH v5 04/27] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
[U-Boot] [PATCH v5 05/27] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
[U-Boot] [PATCH v5 06/27] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
[U-Boot] [PATCH v5 07/27] drivers: ifc: dynamic chipselect mapping support Rajesh Bhagat
[U-Boot] [PATCH v5 08/27] armv8: layerscape: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 09/27] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
[U-Boot] [PATCH v5 10/27] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v5 11/27] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v5 12/27] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
[U-Boot] [PATCH v5 13/27] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v5 14/27] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
[U-Boot] [PATCH v5 15/27] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
[U-Boot] [PATCH v5 16/27] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
[U-Boot] [PATCH v5 17/27] net: fm: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 18/27] drivers: qe: add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 19/27] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
[U-Boot] [PATCH v5 20/27] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 21/27] armv8: ls1046aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 22/27] armv8: ls1043ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 23/27] armv8: ls1043aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 24/27] armv8: ls1012ardb: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 25/27] armv8: ls1012aqds: fix secure boot compilation Rajesh Bhagat
[U-Boot] [PATCH v5 26/27] armv8: ls1012aqds: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v5 27/27] armv8: ls1012afrx: Add TFABOOT support Rajesh Bhagat
[U-Boot] [PATCH v1 12/19] configs: am335x_pdu001: Explicitly enable CONFIG_I2C_COMPAT Felix Brack
[U-Boot] [PATCH v1 12/19] configs: am335x_pdu001: Explicitly enable CONFIG_I2C_COMPAT Felix Brack
[U-Boot] [PATCH v2 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS Felix Brack
[U-Boot] [PATCH v2 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT Felix Brack
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Boris Brezillon
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Boris Brezillon
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Boris Brezillon
[U-Boot] [PATCH] mtd: uboot: Fix hanging during mtd list command Boris Brezillon
[U-Boot] [PATCH V2] mtd: uboot: Fix hanging during mtd list command Boris Brezillon
[U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers Boris Brezillon
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Boris Brezillon
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Boris Brezillon
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Boris Brezillon
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Boris Brezillon
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Boris Brezillon
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Boris Brezillon
[U-Boot] [PATCH 0/3] mtd: Fix partition handling code Boris Brezillon
[U-Boot] [PATCH 1/3] mtd: Use default mtdparts/mtids when not defined in the environment Boris Brezillon
[U-Boot] [PATCH 2/3] cmd: ubi: Remove useless call to mtdparts_init() Boris Brezillon
[U-Boot] [PATCH 3/3] mtd: Drop duplicate MTD_PARTITIONS Kconfig option Boris Brezillon
[U-Boot] [PATCH] cmd: ubi: Make ubi_detach() static Boris Brezillon
[U-Boot] [PATCH] ARC: Don't pre-define CROSS_COMPILE Alexey Brodkin
[U-Boot] [PATCH] ARC: Add model property to boards .dts Alexey Brodkin
[U-Boot] [PATCH] ARC: Implement print_cpuinfo() Alexey Brodkin
[U-Boot] [PATCH] ARC: Enable DISPLAY_CPUINFO & DISPLAY_BOARDINFO Alexey Brodkin
[U-Boot] [PATCH] arc: Add support for IoT development kit Alexey Brodkin
[U-Boot] Please pull ARC changes Alexey Brodkin
[U-Boot] [PATCH] iot_dk: Disable networking support Alexey Brodkin
[U-Boot] [PATCH] axs10x/emdk/hsdk/iot_dk: Implement board_mmc_getcd() Alexey Brodkin
[U-Boot] [PATCH] ARC: Don't use COMMON section for global not-initialized variables Alexey Brodkin
[U-Boot] [PATCH] iot_dk: Add localversion string Alexey Brodkin
[U-Boot] [PATCH 0/2] ARC: Allow per-board more precise CPU identification Alexey Brodkin
[U-Boot] [PATCH 1/2] ARC: make generic print_cpuinfo() weak Alexey Brodkin
[U-Boot] [PATCH 2/2] iot_dk/hsdk: Implement its own print_cpuinfo() Alexey Brodkin
[U-Boot] [PATCH] iot_dk: Implement board reset Alexey Brodkin
[U-Boot] [PATCH] iot_dk: Add support of 136 MHz clock Alexey Brodkin
[U-Boot] [PATCH] iot_dk: Save CPU clock value to gd->cpu_clk Alexey Brodkin
[U-Boot] [PATCH] axs10x/emdk/hsdk/iot_dk: Implement board_mmc_getcd() Alexey Brodkin
[U-Boot] [PATCH] iot_dk: Link for eFlash Alexey Brodkin
[U-Boot] [PATCH] ARC: Don't use COMMON section for global not-initialized variables Alexey Brodkin
[U-Boot] Please pull ARC changes Alexey Brodkin
[U-Boot] Please pull ARC changes Alexey Brodkin
[U-Boot] [uboot-snps-arc] Please pull ARC changes Alexey Brodkin
[U-Boot] Please pull ARC changes (fixed re-send) Alexey Brodkin
[U-Boot] [PATCH] emdk->emsdp: Rename board Alexey Brodkin
[U-Boot] [PATCH] iot_dk: Add README Alexey Brodkin
[U-Boot] [PATCH 04/20] arm: dts: MediaTek: add MT7629 reference board support Matthias Brugger
[U-Boot] [PATCH 05/20] arm: dts: MediaTek: add MT7623 Bananapi R2 board support Matthias Brugger
[U-Boot] [PATCH 10/20] timer: MediaTek: add timer driver for MediaTek SoCs Matthias Brugger
[U-Boot] [PATCH 03/20] arm: MediaTek: add basic support for MT7623 boards Matthias Brugger
[U-Boot] [PATCH 02/20] arm: MediaTek: add basic support for MT7629 boards Matthias Brugger
[U-Boot] [PATCH 13/20] pinctrl: MediaTek: add pinctrl driver for MT7623 SoC Matthias Brugger
[U-Boot] [PATCH 00/20] Add support for MediaTek SoCs - MT7623n / MT7629 Matthias Brugger
[U-Boot] [PATCH] ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1 Patrice CHOTARD
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Patrice CHOTARD
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Patrice CHOTARD
[U-Boot] [PATCH v2 9/9] pinctrl: sandbox: Add get_pin_muxing ops support Patrice CHOTARD
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Patrice CHOTARD
[U-Boot] [PATCH v2 0/9] Add pinmux command Patrice CHOTARD
[U-Boot] [PATCH v3 3/9] dm: uclass: Add uclass_foreach_dev_probe Patrice CHOTARD
[U-Boot] [PATCH v3 3/9] dm: uclass: Add uclass_foreach_dev_probe Patrice CHOTARD
[U-Boot] [PATCH v3 9/9] pinctrl: sandbox: Add get_pin_muxing ops support Patrice CHOTARD
[U-Boot] [PATCH v3 1/9] dm: pinctrl: Add get_pin_muxing() ops Patrice CHOTARD
[U-Boot] [PATCH v3 7/9] pinctrl: stm32: Add get_pin_muxing() ops Patrice CHOTARD
[U-Boot] [PATCH v3 3/9] dm: uclass: Add uclass_foreach_dev_probe Patrice CHOTARD
[U-Boot] [PATCH 2/6] MSCC: add support for VCoreIII SoCs Gregory CLEMENT
[U-Boot] [PATCH 3/6] MSCC: add board support for the VCoreIII based evaluation boards Gregory CLEMENT
[U-Boot] [PATCH 3/6] MSCC: add board support for the VCoreIII based evaluation boards Gregory CLEMENT
[U-Boot] [PATCH 4/6] MSCC: add device tree for Ocelot and Luton (boards and SoCs) Gregory CLEMENT
[U-Boot] [PATCH 5/6] MSCC: add configuration for Ocelot and Luton based boards Gregory CLEMENT
[U-Boot] [PATCH 6/6] MIPS: bootm: Add support for Vcore III linux kernel Gregory CLEMENT
[U-Boot] [PATCH v2 0/7] Add support for the SoCs found in Microsemi switches Gregory CLEMENT
[U-Boot] [PATCH v2 1/7] MIPS: move create_tlb() in an proper header: mipsregs.h Gregory CLEMENT
[U-Boot] [PATCH v2 2/7] MIPS: Allow to prefetch and lock instructions into cache Gregory CLEMENT
[U-Boot] [PATCH v2 3/7] MSCC: add support for Ocelot SoCs Gregory CLEMENT
[U-Boot] [PATCH v2 4/7] MSCC: add support for Luton SoCs Gregory CLEMENT
[U-Boot] [PATCH v2 5/7] MSCC: add board support for the Ocelots based evaluation boards Gregory CLEMENT
[U-Boot] [PATCH v2 6/7] MSCC: add board support for the Luton based evaluation board Gregory CLEMENT
[U-Boot] [PATCH v2 7/7] MIPS: bootm: Add support for Vcore III linux kernel Gregory CLEMENT
[U-Boot] [PATCH v2] pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based) Gregory CLEMENT
[U-Boot] [PATCH v2] gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spi Gregory CLEMENT
[U-Boot] [PATCH] DW SPI: Allow to overload the management of the external CS Gregory CLEMENT
[U-Boot] [PATCH v2] DW SPI: Allow to overload the management of the external CS Gregory CLEMENT
[U-Boot] [PATCH v3 5/5] sunxi: DT: add support for Pinebook Vagrant Cascadian
[U-Boot] [U-Boot, 3/3] pwm: sunxi: choose best prescaler to improve PWM resolution Vagrant Cascadian
[U-Boot] [PATCH v4 0/5] Add support for Pinebook Vagrant Cascadian
[U-Boot] ZYNQ ZC706 Board Rama Chandra
[U-Boot] [PATCH v3] arm: at91: wdt: Convert watchdog driver to dm/dt Prasanthi Chellakumar
[U-Boot] [PATCH v3 00/17] riscv: Add QEMU virt board support Rick Chen
[U-Boot] [PATCH 1/1] riscv: allow native compilation Rick Chen
[U-Boot] [PATCH 1/1] riscv: allow native compilation Rick Chen
[U-Boot] [PATCH] riscv: dts: Sync to Linux Kernel ae350 dts. Rick Chen
[U-Boot] [PATCH 1/2] riscv: configs: Separate ax25-ae350 for 32/64 bit. Rick Chen
[U-Boot] [PATCH 2/2] riscv: dts: Add ae350_32.dts for 32 bit Rick Chen
[U-Boot] [PATCH] riscv: dts: Sync to Linux Kernel ae350 dts. Rick Chen
[U-Boot] FW: [PATCH 18/30] riscv: invalidate the instruction cache before jumping to Linux Rick Chen
[U-Boot] FW: [PATCH 01/30] tools: .gitignore: add prelink-riscv Rick Chen
[U-Boot] FW: [PATCH 03/30] dts: riscv: update makefile to also clean the RISC-V dts directory Rick Chen
[U-Boot] FW: [PATCH 02/30] riscv: ignore device tree binaries Rick Chen
[U-Boot] [PATCH 04/30] riscv: rename CPU_RISCV_32/64 to match architecture names ARCH_RV32I/64I Rick Chen
[U-Boot] [PATCH 05/30] riscv: select CONFIG_PHYS_64BIT on RV64I systems Rick Chen
[U-Boot] [PATCH 10/30] riscv: enable -fdata-sections Rick Chen
[U-Boot] [PATCH 09/30] riscv: move target selection into separate file Rick Chen
[U-Boot] [PATCH 11/30] riscv: fix use of incorrectly sized variables Rick Chen
[U-Boot] [PATCH 12/30] riscv: make use of the barrier functions from Linux Rick Chen
[U-Boot] [PATCH 13/30] riscv: do not reimplement generic io functions Rick Chen
[U-Boot] [PATCH 14/30] riscv: complete the list of exception codes Rick Chen
[U-Boot] [PATCH 15/30] riscv: treat undefined exception codes as reserved Rick Chen
[U-Boot] [PATCH 16/30] riscv: hang on unhandled exceptions Rick Chen
[U-Boot] [PATCH 17/30] riscv: implement the invalidate_icache_* functions Rick Chen
[U-Boot] [PATCH 19/30] riscv: fix inconsistent use of spaces and tabs in start.S Rick Chen
[U-Boot] [PATCH 20/30] riscv: align mtvec on a 4-byte boundary Rick Chen
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Rick Chen
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Rick Chen
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Rick Chen
[U-Boot] [PATCH 23/30] riscv: do not blindly modify the mstatus CSR Rick Chen
[U-Boot] [PATCH 24/30] riscv: save hart ID and device tree passed by prior boot stage Rick Chen
[U-Boot] [PATCH 25/30] riscv: qemu: use device tree passed by prior boot stage Rick Chen
[U-Boot] [PATCH 26/30] bdinfo: riscv: print fdt_blob address Rick Chen
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Rick Chen
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Rick Chen
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Rick Chen
[U-Boot] [PATCH 2/2] riscv: dts: Add ae350_32.dts for 32 bit Rick Chen
[U-Boot] FW: [PATCH 18/30] riscv: invalidate the instruction cache before jumping to Linux Rick Chen
[U-Boot] [PATCH] riscv: cache: Implement i/dcache [status, enable, disable] Rick Chen
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Rick Chen
[U-Boot] [PATCH 1/3] Kbuild: add LDFLAGS_STANDALONE Rick Chen
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Rick Chen
[U-Boot] [PATCH] riscv: cache: Implement i/dcache [status, enable, disable] Rick Chen
[U-Boot] FW: [PATCH 18/30] riscv: invalidate the instruction cache before jumping to Linux Rick Chen
[U-Boot] [PATCH v2 0/9] Add pinmux command Patrice Chotard
[U-Boot] [PATCH v2 1/9] dm: pinctrl: Add get_pin_muxing() ops Patrice Chotard
[U-Boot] [PATCH v2 2/9] dm: pinctrl: Add pinctrl_get_pin_name and pinctrl_get_pins_count Patrice Chotard
[U-Boot] [PATCH v2 3/9] dm: uclass: Add uclass_foreach_dev_probe Patrice Chotard
[U-Boot] [PATCH v2 4/9] cmd: pinmux: Add pinmux command Patrice Chotard
[U-Boot] [PATCH v2 5/9] pinctrl: stm32: Add get_pins_count() ops Patrice Chotard
[U-Boot] [PATCH v2 6/9] pinctrl: stm32: Add get_pin_name() ops Patrice Chotard
[U-Boot] [PATCH v2 7/9] pinctrl: stm32: Add get_pin_muxing() ops Patrice Chotard
[U-Boot] [PATCH v2 8/9] gpio: stm32f7: Add ops get_function Patrice Chotard
[U-Boot] [PATCH v2 9/9] pinctrl: sandbox: Add get_pin_muxing ops support Patrice Chotard
[U-Boot] [PATCH] mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7 Patrice Chotard
[U-Boot] [PATCH] ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1 Patrice Chotard
[U-Boot] [PATCH v3 0/9] Add pinmux command Patrice Chotard
[U-Boot] [PATCH v3 1/9] dm: pinctrl: Add get_pin_muxing() ops Patrice Chotard
[U-Boot] [PATCH v3 2/9] dm: pinctrl: Add pinctrl_get_pin_name and pinctrl_get_pins_count Patrice Chotard
[U-Boot] [PATCH v3 3/9] dm: uclass: Add uclass_foreach_dev_probe Patrice Chotard
[U-Boot] [PATCH v3 4/9] cmd: pinmux: Add pinmux command Patrice Chotard
[U-Boot] [PATCH v3 5/9] pinctrl: stm32: Add get_pins_count() ops Patrice Chotard
[U-Boot] [PATCH v3 6/9] pinctrl: stm32: Add get_pin_name() ops Patrice Chotard
[U-Boot] [PATCH v3 7/9] pinctrl: stm32: Add get_pin_muxing() ops Patrice Chotard
[U-Boot] [PATCH v3 8/9] gpio: stm32f7: Add ops get_function Patrice Chotard
[U-Boot] [PATCH v3 9/9] pinctrl: sandbox: Add get_pin_muxing ops support Patrice Chotard
[U-Boot] [PATCH v4 00/11] Add pinmux command Patrice Chotard
[U-Boot] [PATCH v4 01/11] dm: pinctrl: Add get_pin_muxing() ops Patrice Chotard
[U-Boot] [PATCH v4 02/11] dm: pinctrl: Add pinctrl_get_pin_name and pinctrl_get_pins_count Patrice Chotard
[U-Boot] [PATCH v4 03/11] dm: uclass: Add uclass_next_device_err() to return a valid device Patrice Chotard
[U-Boot] [PATCH v4 04/11] dm: uclass: Add uclass_foreach_dev_probe Patrice Chotard
[U-Boot] [PATCH v4 05/11] cmd: pinmux: Add pinmux command Patrice Chotard
[U-Boot] [PATCH v4 06/11] pinctrl: stm32: Add get_pins_count() ops Patrice Chotard
[U-Boot] [PATCH v4 07/11] pinctrl: stm32: Add get_pin_name() ops Patrice Chotard
[U-Boot] [PATCH v4 08/11] pinctrl: stm32: Add get_pin_muxing() ops Patrice Chotard
[U-Boot] [PATCH v4 09/11] gpio: stm32f7: Add ops get_function Patrice Chotard
[U-Boot] [PATCH v4 10/11] pinctrl: sandbox: Add get_pin_muxing ops support Patrice Chotard
[U-Boot] [PATCH v4 11/11] test/py: test pinmux command Patrice Chotard
[U-Boot] i6300esb watchdog Jaap Crezee
[U-Boot] [PATCH v2] cmd: usb_mass_storage: add protection for block_dev Patrick DELAUNAY
[U-Boot] [PATCH] common: Add arch_misc_init() prototype to include/init.h Patrick DELAUNAY
[U-Boot] [PATCH] syscon: reset node list syscon_list after relocation Patrick DELAUNAY
[U-Boot] [PATCH 01/13] arm: stm32mp: Remove DM_FLAG_PRE_RELOC flag Patrick DELAUNAY
[U-Boot] [PATCH 03/13] gpio: Remove DM_FLAG_PRE_RELOC flag in various drivers Patrick DELAUNAY
[U-Boot] [PATCH] syscon: update syscon_node_to_regmap to use the DM functions Patrick DELAUNAY
[U-Boot] [PATCH] syscon: update syscon_node_to_regmap to use the DM functions Patrick DELAUNAY
[U-Boot] U-Boot and The Boot Loader Specification Alexander Dahl
[U-Boot] U-Boot and The Boot Loader Specification Alexander Dahl
[U-Boot] U-Boot and The Boot Loader Specification Alexander Dahl
[U-Boot] [PATCH 1/2] arm: K3: am654: Choose MMC boot device based on boot port Andrew F. Davis
[U-Boot] [PATCH 2/2] arm: K3: am654: Add support for getting boot mode Andrew F. Davis
[U-Boot] [PATCH] cmd: pxe: add support for FIT config selection Patrick Delaunay
[U-Boot] [PATCH 0/5] arm: cleanup prototypes in u-boot-arm.h Patrick Delaunay
[U-Boot] [PATCH 1/5] arm: remove prototype for arch_interrupt_init Patrick Delaunay
[U-Boot] [PATCH 2/5] arm: remove prototype for reset_timer_masked Patrick Delaunay
[U-Boot] [PATCH 3/5] arm: remove prototype for udelay_masked Patrick Delaunay
[U-Boot] [PATCH 4/5] arm: remove prototype for get_timer_masked Patrick Delaunay
[U-Boot] [PATCH 5/5] arm: remove duplicated prototypes in u-boot.arm.h Patrick Delaunay
[U-Boot] [PATCH] syscon: reset node list syscon_list after relocation Patrick Delaunay
[U-Boot] [PATCH] cmd: remove CONFIG_SOURCE support in Makefile Patrick Delaunay
[U-Boot] [PATCH] drivers: cosmetic: Convert SPDX license tags to Linux Kernel style Patrick Delaunay
[U-Boot] [PATCH 1/2] i2c: stm32f7: cosmetic: clean the driver Patrick Delaunay
[U-Boot] [PATCH 2/2] i2c: stm32f7: change setup struct to const Patrick Delaunay
[U-Boot] [PATCH] syscon: update syscon_node_to_regmap to use the DM functions Patrick Delaunay
[U-Boot] [PATCH v2] syscon: update syscon_node_to_regmap to use the DM functions Patrick Delaunay
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Wolfgang Denk
[U-Boot] [PATCH] mpc83xx: Mark boards as orphaned Wolfgang Denk
[U-Boot] [PPC] Internet connection on qemu-ppce500 Wolfgang Denk
[U-Boot] U-Boot and The Boot Loader Specification Wolfgang Denk
[U-Boot] U-Boot and The Boot Loader Specification Wolfgang Denk
[U-Boot] U-Boot and The Boot Loader Specification Wolfgang Denk
[U-Boot] [PATCH] tools: imx8image: return SUCCESS when the required files not found Wolfgang Denk
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Wolfgang Denk
[U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices Wolfgang Denk
[U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices Wolfgang Denk
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Wolfgang Denk
[U-Boot] [PATCH 0/2] Add Khadas VIM2 board support Loic Devulder
[U-Boot] [PATCH 1/2] ARM: meson: Add Khadas VIM2 board DT Loic Devulder
[U-Boot] [PATCH 2/2] ARM: meson: Add Khadas VIM2 board support Loic Devulder
[U-Boot] [PATCH 0/2] Add Khadas VIM2 board support Loic Devulder
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Loic Devulder
[U-Boot] [PATCH v4 5/5] sunxi: DT: add support for Pinebook Loic Devulder
[U-Boot] spl: fix the new position of gd and stack Peng Donglin
[U-Boot] [PATCH] spl: fix the new position of gd and stack Peng Donglin
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Liviu Dudau
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Liviu Dudau
[U-Boot] [PATCH] dm: core: Widen the dump tree to show more of the driver's name. Liviu Dudau
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Liviu Dudau
[U-Boot] [PATCH] dm: core: Widen the dump tree to show more of the driver's name. Liviu Dudau
[U-Boot] [PATCH] tests/test_bind.py: Update test to match the wider 'dm tree' output Liviu Dudau
[U-Boot] [PATCH] i2c: fix: Add support for the Arm's Versatile Express I2C controller Liviu Dudau
[U-Boot] [PATCH v2] dm: core: Widen the dump tree to show more of the driver's name. Liviu Dudau
[U-Boot] [PATCH v2] dm: core: Widen the dump tree to show more of the driver's name. Liviu Dudau
[U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
[U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees Angelo Dureghello
[U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option Angelo Dureghello
[U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT Angelo Dureghello
[U-Boot] [PATCH v2 04/11] drivers: serial: mcfuart: add DT support Angelo Dureghello
[U-Boot] [PATCH v2 05/11] drivers: serial: mcfuart: add Kconfig option Angelo Dureghello
[U-Boot] [PATCH v2 06/11] m68k: architecture changes to support fdt Angelo Dureghello
[U-Boot] [PATCH v2 07/11] m68k: add initial dts files for all m68k boards Angelo Dureghello
[U-Boot] [PATCH v2 08/11] m68k: enabling long jumps on mcf54x5 SoCs Angelo Dureghello
[U-Boot] [PATCH v2 09/11] configs: enable use of DT for all m68k boards Angelo Dureghello
[U-Boot] [PATCH v2 10/11] configs: add DM_SPI config option Angelo Dureghello
[U-Boot] [PATCH v2 11/11] configs: remove CONFIG_SYS_DSPI_XX references Angelo Dureghello
[U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees Angelo Dureghello
[U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option Angelo Dureghello
[U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT Angelo Dureghello
[U-Boot] [PATCH v3 01/11] m68k: add basic set of devicetrees Angelo Dureghello
[U-Boot] [PATCH v3 02/11] drivers: spi: cf_spi: add Kconfig option Angelo Dureghello
[U-Boot] [PATCH v3 03/11] drivers: spi: cf_spi: convert to driver model Angelo Dureghello
[U-Boot] [PATCH v3 04/11] drivers: serial: mcfuart: add DT support Angelo Dureghello
[U-Boot] [PATCH v3 05/11] drivers: serial: mcfuart: add Kconfig option Angelo Dureghello
[U-Boot] [PATCH v3 06/11] m68k: architecture changes to support fdt Angelo Dureghello
[U-Boot] [PATCH v3 07/11] m68k: add initial dts files for all m68k boards Angelo Dureghello
[U-Boot] [PATCH v3 08/11] m68k: enabling long jumps on mcf54x5 SoCs Angelo Dureghello
[U-Boot] [PATCH v3 09/11] configs: enable use of DT for all m68k boards Angelo Dureghello
[U-Boot] [PATCH v3 10/11] configs: add DM_SPI config option Angelo Dureghello
[U-Boot] [PATCH v3 11/11] configs: remove CONFIG_SYS_DSPI_XX references Angelo Dureghello
[U-Boot] mmc: get mmc_spi working again Marcel Eckert
[U-Boot] i2c: Fix pca953x endianess issue, commit daa75b34828d45b7c1d63009188d45f4a32d06ba Dirk Eibach
[U-Boot] [PATCH v3 26/28] armv8: ls1012a: fix secure boot compilation Fabio Estevam
[U-Boot] [PATCH] arm: udoo: Convert to distro config Fabio Estevam
[U-Boot] [PATCH 0/7] Restructure the i.MX U-Boot documentation Fabio Estevam
[U-Boot] [PATCH] net: fec_mxc: add support for i.MX8X Fabio Estevam
[U-Boot] [PATCH] warp7: MAINTAINERS: Add an entry for warp7_bl33_defconfig Fabio Estevam
[U-Boot] [PATCH] mx8mq_evk: README: Delete file introduced by mistake Fabio Estevam
[U-Boot] [PATCH] arm: dts: imx8qxp: fix build warining Fabio Estevam
[U-Boot] [PATCH] ARM: dts: fsl-imx8qxp-mek: Move regulator outside "simple-bus" Fabio Estevam
[U-Boot] [PATCH] ARM: dts: fsl-imx8qxp-mek: Move regulator outside "simple-bus" Fabio Estevam
[U-Boot] [PATCH v6 34/34] imx: add i.MX8QXP MEK board support Fabio Estevam
[U-Boot] [PATCH V5 00/32] i.MX: Add i.MX8QXP support Peng Fan
[U-Boot] [PATCH V5 32/32] imx: add i.MX8QXP MEK board support Peng Fan
[U-Boot] [PATCH 1/3] tools: add i.MX8/8X image support Peng Fan
[U-Boot] [PATCH 2/3] arm: imx: include imx8image support Peng Fan
[U-Boot] [PATCH 3/3] imx: imx8qxp_mek: update to build image in U-Boot Peng Fan
[U-Boot] [PATCH v6 20/34] imx8: cpu: add function for reading FEC MAC from fuse Peng Fan
[U-Boot] [PATCH v6 21/34] imx8: cpu: add uclass based CPU driver Peng Fan
[U-Boot] [PATCH] tools: imx8image: return SUCCESS when the required files not found Peng Fan
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Peng Fan
[U-Boot] [PATCH] tools: imx8image: return SUCCESS when the required files not found Peng Fan
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Peng Fan
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Peng Fan
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Peng Fan
[U-Boot] [PATCH V2] imx: mkimage: avoid stop CI when required files not exists Peng Fan
[U-Boot] [PATCH] arm: dts: imx8qxp: fix build warining Peng Fan
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Peng Fan
[U-Boot] [PATCH v6 34/34] imx: add i.MX8QXP MEK board support Peng Fan
[U-Boot] [PATCH] arm: dts: imx8qxp: fix build warining Peng Fan
[U-Boot] [PATCH] mx8mq_evk: README: Delete file introduced by mistake Peng Fan
[U-Boot] [PATCH] ARM: dts: fsl-imx8qxp-mek: Move regulator outside "simple-bus" Peng Fan
[U-Boot] [PATCH] ARM: dts: fsl-imx8qxp-mek: Move regulator outside "simple-bus" Peng Fan
[U-Boot] [PATCH] MAINTAINERS: add NXP linux team maillist as i.MX reviewer Peng Fan
[U-Boot] [PATCH v2 0/2] Fix to keystone2 uinitrd fixup logic Nicholas Faustini
[U-Boot] [PATCH v2 1/2] fdt: add call to ft_board_setup_ex() for ks2 boards Nicholas Faustini
[U-Boot] [PATCH v2 2/2] board: ks2: move uinitrd fixup logic inside ft_board_setup_ex Nicholas Faustini
[U-Boot] [PATCH 1/3] spi: davinci: Add platdata support Adam Ford
[U-Boot] [PATCH 1/3] spi: davinci: Add platdata support Adam Ford
[U-Boot] [PATCH 2/3] board: da8xxevm: Add SPL DM for serial, spi Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Adam Ford
[U-Boot] [PATCH v1 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL Adam Ford
[U-Boot] [PATCH v2 00/19] DM_I2C_COMPAT removal for all ti platforms Adam Ford
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Adam Ford
[U-Boot] [PATCH 1/3] spi: davinci: Add platdata support Adam Ford
[U-Boot] [PATCH V2] ARM: da850evm_direct_nor: Remove DM_I2C_COMPAT Adam Ford
[U-Boot] ARM: da850evm: Remove DM_I2C_COMPAT Adam Ford
[U-Boot] [PATCH] ARM: omap3_logic.c: Optimize DDR timings based on OMAP35 or 36/37 Adam Ford
[U-Boot] [PATCH] ARM: mach-omap2: Kconfig: Make SYS_MPUCLK dependent on AM33XX Adam Ford
[U-Boot] [PATCH] ARM: omap3logic: Encapsulate the MUSB functions in check for DM Adam Ford
[U-Boot] [PATCH] ARM: omap3logic: Specify DM serial driver as omap_serial Adam Ford
[U-Boot] [PATCH] ARM: omap3logic: Fix MMC name Adam Ford
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] [PATCH] mtd: uboot: Fix hanging during mtd list command Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] [PATCH] mtd: uboot: Fix hanging during mtd list command Adam Ford
[U-Boot] [PATCH V2] mtd: uboot: Fix hanging during mtd list command Adam Ford
[U-Boot] [PATCH V3] mtd: uboot: Fix hanging during mtd list command Adam Ford
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Adam Ford
[U-Boot] U-Boot SPL and LTO (armv7) Adam Ford
[U-Boot] [PATCH] Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig Adam Ford
[U-Boot] [PATCH] ARM: omap3_logic: Add NOR Flash Support for SOM-LV Adam Ford
[U-Boot] [PATCH] ARM: omap3_logic: Add NOR Flash Support for SOM-LV Adam Ford
[U-Boot] [PATCH] ARM: DTS: Resync am3517-evm.dts with Linux 4.19 Adam Ford
[U-Boot] [PATCH] configs: am3517_evm: Use default OMAP3 memory settings Adam Ford
[U-Boot] [PATCH] ARM: am3517_evm: Build for Thumb Adam Ford
[U-Boot] [PATCH] ARM: omap3_logic: Make CONFIG_SYS_TEXT_BASE match README.omap3 Adam Ford
[U-Boot] [PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms Adam Ford
[U-Boot] [PATCH 00/13] dm: DM_FLAG_PRE_RELOC flag clean up Adam Ford
[U-Boot] [PATCH 1/2] ARM: omap3_logic: Remove SPL_OF_CONTROL and OF_PLATDATA Adam Ford
[U-Boot] [PATCH 2/2] ARM: am3517_evm: Remove SPL_OF_CONTROL and OF_PLATDATA Adam Ford
[U-Boot] [PATCH 0/4] net: dm: fec: Fixes and improvements Martin Fuzzey
[U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration Martin Fuzzey
[U-Boot] [PATCH 2/4] net: dm: fec: Fix phy-reset-duration clamping and defaults Martin Fuzzey
[U-Boot] [PATCH 3/4] net: dm: fec: Support the phy-supply binding Martin Fuzzey
[U-Boot] [PATCH 4/4] net: dm: fec: Obtain the transceiver type from the DT Martin Fuzzey
[U-Boot] [PATCH 0/4] net: dm: fec: Fixes and improvements Martin Fuzzey
[U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration Martin Fuzzey
[U-Boot] [PATCH 2/4] net: dm: fec: Fix phy-reset-duration clamping and defaults Martin Fuzzey
[U-Boot] [PATCH 3/4] net: dm: fec: Support the phy-supply binding Martin Fuzzey
[U-Boot] [PATCH 4/4] net: dm: fec: Obtain the transceiver type from the DT Martin Fuzzey
[U-Boot] [PATCH 0/3] power: Add support for the Dialog DA9063 PMIC Martin Fuzzey
[U-Boot] [PATCH 1/3] pmic: allow dump command for non contiguous register maps Martin Fuzzey
[U-Boot] [PATCH 2/3] power: pmic: add driver for Dialog DA9063 PMIC Martin Fuzzey
[U-Boot] [PATCH 3/3] power: regulator: add driver for Dialog DA9063 PMIC Martin Fuzzey
[U-Boot] [PATCH] w1-eeprom: ds24xxx: fix data abort in ds24xxx_probe() Martin Fuzzey
[U-Boot] [PATCH] w1: fix data abort if no one wire bus master present Martin Fuzzey
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM Martin Fuzzey
[U-Boot] [PATCH] w1: fix data abort if no one wire bus master present Martin Fuzzey
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM Martin Fuzzey
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM Martin Fuzzey
[U-Boot] [PATCH] w1: Add driver for i.MX bus master controller Martin Fuzzey
[U-Boot] [PATCH] w1-eeprom: Add support for Maxim DS2502 add only memory Martin Fuzzey
[U-Boot] Re : [U-Boot,BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume GARDET
[U-Boot] ZYNQ ZC706 Board Alexandre GRIVEAUX
[U-Boot] MT76XX-driver Weijie Gao
[U-Boot] [PATCH v3 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs Ezequiel Garcia
[U-Boot] [U-Boot, BUG] snow: mmc: SD card access broken: unable to select a mode Guillaume Gardet
[U-Boot] [PATCH 1/1] efi_loader: PSCI reset and shutdown for EL1 Sumit Garg
[U-Boot] [PATCH 1/1] efi_loader: PSCI reset and shutdown for EL1 Sumit Garg
[U-Boot] [PATCH v2 1/1] efi_loader: PSCI reset and shutdown Sumit Garg
[U-Boot] [PATCH v2 1/1] efi_loader: PSCI reset and shutdown Sumit Garg
[U-Boot] [PATCH v3 1/1] efi_loader: PSCI reset and shutdown Sumit Garg
[U-Boot] [PATCH 0/4] Add adc uclass's channel mask and conversion helpers and enhance adc cmd Fabrice Gasnier
[U-Boot] [PATCH 1/4] dm: adc: add uclass's mask and conversion helpers Fabrice Gasnier
[U-Boot] [PATCH 2/4] cmd: adc: add info on channel mask Fabrice Gasnier
[U-Boot] [PATCH 3/4] cmd: adc: print single conversion also in uV Fabrice Gasnier
[U-Boot] [PATCH 4/4] cmd: adc: add an option to scan some or all available channels Fabrice Gasnier
[U-Boot] [PATCH 2/4] cmd: adc: add info on channel mask Fabrice Gasnier
[U-Boot] [PATCH] driver/mtd: Add MICRON manufacturer id in spi framework Yogesh Narayan Gaur
[U-Boot] [PATCH 2/3] net: phy: aquantia: add firmware loading support Jeremy Gebben
[U-Boot] U-Boot and The Boot Loader Specification Dennis Gilmore
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH 00/22] spl: Add features for passing info from SPL to U-Boot proper Simon Glass
[U-Boot] Errors when starting sandbox Simon Glass
[U-Boot] [PATCH 00/15] sandbox: Add support for TPL and other improvements Simon Glass
[U-Boot] [PATCH 01/15] log: Add helpers for common log levels Simon Glass
[U-Boot] [PATCH 02/15] sandbox: Support file truncation with os_open() Simon Glass
[U-Boot] [PATCH 03/15] sandbox: Add a way to write data to the host filesystem Simon Glass
[U-Boot] [PATCH 04/15] sandbox: spi: Drop command-line SPI option Simon Glass
[U-Boot] [PATCH 05/15] sandbox: Support booting from TPL to SPL Simon Glass
[U-Boot] [PATCH 06/15] sandbox: Add a flag to set the default log level Simon Glass
[U-Boot] [PATCH 07/15] sandbox: Remove the old memory file later Simon Glass
[U-Boot] [PATCH 08/15] sandbox: spi: Add more logging Simon Glass
[U-Boot] [PATCH 09/15] sandbox: video: Speed up video output Simon Glass
[U-Boot] [PATCH 10/15] sandbox: Add a debug UART Simon Glass
[U-Boot] [PATCH 11/15] serial: sandbox: Allow serial output without device tree Simon Glass
[U-Boot] [PATCH 12/15] sandbox: tpm: Tidy up enums and return values Simon Glass
[U-Boot] [PATCH 13/15] sandbox: tpm: Enhance to support the latest Chromium OS Simon Glass
[U-Boot] [PATCH 14/15] dm: spi: Clean up detection of sandbox SPI emulator Simon Glass
[U-Boot] [PATCH 15/15] sandbox: Restore blocking I/O on exit Simon Glass
[U-Boot] [PATCH 00/45] Various fixes and improvements Simon Glass
[U-Boot] [PATCH 01/45] dm: core: Alloc uclass-private data to be cache-aligned Simon Glass
[U-Boot] [PATCH 02/45] dm: core: Update some functions to use const Simon Glass
[U-Boot] [PATCH 03/45] dm: core: Add a function to find the first inactive child Simon Glass
[U-Boot] [PATCH 04/45] dm: core: Update ofnode to read binman-style flash entry Simon Glass
[U-Boot] [PATCH 05/45] sf: Avoid allocating memory on every read operation Simon Glass
[U-Boot] [PATCH 06/45] spl: input: Allow input in SPL and TPL Simon Glass
[U-Boot] [PATCH 07/45] Makefile: Add a warning if SPL/TPL cannot be built Simon Glass
[U-Boot] [PATCH 08/45] spl: misc: Allow misc drivers in SPL and TPL Simon Glass
[U-Boot] [PATCH 09/45] blk: Support block drivers in TPL Simon Glass
[U-Boot] [PATCH 10/45] Kconfig: Convert CONFIG_RTC_MC146818 to Kconfig Simon Glass
[U-Boot] [PATCH 11/45] rtc: Allow use of RTC in SPL and TPL Simon Glass
[U-Boot] [PATCH 12/45] fdt: Document the fact that dtc is now built Simon Glass
[U-Boot] [PATCH 13/45] doc: Update docs for device tree in SPL, TPL Simon Glass
[U-Boot] [PATCH 14/45] fdt: Allow indicating a node is for U-Boot proper only Simon Glass
[U-Boot] [PATCH 15/45] tpm: Add support for SPL and TPL Simon Glass
[U-Boot] [PATCH 16/45] serial: Allow serial to be absent in TPL Simon Glass
[U-Boot] [PATCH 17/45] fdt: Allow libfdt in TPL Simon Glass
[U-Boot] [PATCH 18/45] cros: Update cros_ec code to use struct udevice Simon Glass
[U-Boot] [PATCH 19/45] cros: Adjust board_get_cros_ec_dev() to return a udevice Simon Glass
[U-Boot] [PATCH 20/45] dm: spi: Add logging of some return values Simon Glass
[U-Boot] [PATCH 21/45] fdt: Remove fdtdec_decode_region() function Simon Glass
[U-Boot] [PATCH 22/45] video: Adjust video_clear() to return an error Simon Glass
[U-Boot] [PATCH 23/45] tpm: Use livetree and allow children Simon Glass
[U-Boot] [PATCH 24/45] tpm: Tidy up logging in tpm-common.c Simon Glass
[U-Boot] [PATCH 25/45] tpm: Add a few new commands for v1 Simon Glass
[U-Boot] [PATCH 26/45] binman: Move to three-digit test-file numbers Simon Glass
[U-Boot] [PATCH 27/45] binman: Add a test for Intel reference code Simon Glass
[U-Boot] [PATCH 28/45] log: Add comments to the rest of the log categories Simon Glass
[U-Boot] [PATCH 29/45] malloc_simple: Add logging of allocations Simon Glass
[U-Boot] [PATCH 30/45] Add a header file for strings Simon Glass
[U-Boot] [PATCH 31/45] Rename GPT_HEADER_SIGNATURE to avoid conflict Simon Glass
[U-Boot] [PATCH 32/45] cros: Update ec_commands to latest version Simon Glass
[U-Boot] [PATCH 33/45] x86: Update mtrr functions to allow leaving cache alone Simon Glass
[U-Boot] [PATCH 34/45] cros_ec: Update cros_ec_read_hash() to specify the image Simon Glass
[U-Boot] [PATCH 35/45] cros_ec: Add support for v3 messages on LPC Simon Glass
[U-Boot] [PATCH 36/45] test: panel: Add a test for the panel uclass Simon Glass
[U-Boot] [PATCH 37/45] panel: Expand the backlight support Simon Glass
[U-Boot] [PATCH 38/45] ctags: Minor changes to fix ctags output Simon Glass
[U-Boot] [PATCH 39/45] fdt: Allow C++ comments in link scripts and DT files Simon Glass
[U-Boot] [PATCH 40/45] pci: Add a little more debugging to pci_rom Simon Glass
[U-Boot] [PATCH 41/45] sysreset: Tidy up a few comments and logging Simon Glass
[U-Boot] [PATCH 42/45] sysreset: Add a way to find the last reset Simon Glass
[U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos Simon Glass
[U-Boot] [PATCH 44/45] video: Tidy up a few comments in video.o Simon Glass
[U-Boot] [PATCH 45/45] dtoc: Fix the value of SetInt() Simon Glass
[U-Boot] Errors when starting sandbox Simon Glass
[U-Boot] [PATCH v2 00/17] test: Various test refinements and improvements Simon Glass
[U-Boot] [PATCH v2 01/17] test/py: ignore console read exceptions after test failure Simon Glass
[U-Boot] [PATCH v2 02/17] sandbox: Unprotect DATA regions in bus tests Simon Glass
[U-Boot] [PATCH v2 03/17] patman: Handle unicode in _ProjectConfigParser tests Simon Glass
[U-Boot] [PATCH v2 04/17] test/py: Fix unicode handling for log filtering Simon Glass
[U-Boot] [PATCH v2 05/17] buildman: Make the toolchain test more forgiving Simon Glass
[U-Boot] [PATCH v2 06/17] Makefile: Add a 'check' target for make Simon Glass
[U-Boot] [PATCH v2 07/17] test: Simplify the PATH setup Simon Glass
[U-Boot] [PATCH v2 08/17] test: Print the name of each test before running it Simon Glass
[U-Boot] [PATCH v2 09/17] test: Tidy up comments and variable name Simon Glass
[U-Boot] [PATCH v2 10/17] binman: Add a default path to libfdt.py Simon Glass
[U-Boot] [PATCH v2 11/17] binman: Fix up removal of temporary directories Simon Glass
[U-Boot] [PATCH v2 12/17] binman: Separate out testSplBssPad() Simon Glass
[U-Boot] [PATCH v2 13/17] buildman: dtoc: Suppress unwanted output from test Simon Glass
[U-Boot] [PATCH v2 14/17] tools: Set an initial value for indir Simon Glass
[U-Boot] [PATCH v2 15/17] patman: Don't clear progress in tout unless it was used Simon Glass
[U-Boot] [PATCH v2 16/17] test: Reduce the number of tests run with sandbox_flattree Simon Glass
[U-Boot] [PATCH v2 17/17] binman: Run tests concurrently Simon Glass
[U-Boot] [PATCH 01/31] fdt: Add Python support for adding/removing nodes Simon Glass
[U-Boot] [PATCH 02/31] binman: Move 'special properties' docs to README.entries Simon Glass
[U-Boot] [PATCH 03/31] binman: Allow 'fill' entry to have a size of 0 Simon Glass
[U-Boot] [PATCH 04/31] binman: Generate an error when text is not provided Simon Glass
[U-Boot] [PATCH 05/31] binman: Add x86 support for starting TPL Simon Glass
[U-Boot] [PATCH 06/31] binman: Tidy up the vblock entry Simon Glass
[U-Boot] [PATCH 07/31] binman: Support building a selection of images Simon Glass
[U-Boot] [PATCH 08/31] dtoc: Allow syncing of the device tree back to a file Simon Glass
[U-Boot] [PATCH 09/31] dtoc: Fixed endianness in Prop.GetEmpty() Simon Glass
[U-Boot] [PATCH 10/31] dtoc: Support adding new nodes Simon Glass
[U-Boot] [PATCH 11/31] dtoc: Add methods for adding and updating properties Simon Glass
[U-Boot] [PATCH 12/31] dtoc: Add a way to create an Fdt object from a data block Simon Glass
[U-Boot] [PATCH 13/31] binman: Add an entry method for getting the default filename Simon Glass
[U-Boot] [PATCH 14/31] binman: Move state information into a new module Simon Glass
[U-Boot] [PATCH 15/31] binman: Move state logic into the state module Simon Glass
[U-Boot] [PATCH 16/31] binman: Centralise device-tree updates within binman Simon Glass
[U-Boot] [PATCH 17/31] binman: Obtain the list of device trees from the config Simon Glass
[U-Boot] [PATCH 18/31] binman: Allow control of whether a fake DT is used Simon Glass
[U-Boot] [PATCH 20/31] patman: Detect missing tools and report them Simon Glass
[U-Boot] [PATCH 19/31] binman: Support updating all device tree files Simon Glass
[U-Boot] [PATCH 21/31] binman: Support compressed entries Simon Glass
[U-Boot] [PATCH 22/31] binman: Allow zero-size sections Simon Glass
[U-Boot] [PATCH 23/31] binman: Support adding files Simon Glass
[U-Boot] [PATCH 24/31] binman: Support expanding entries Simon Glass
[U-Boot] [PATCH 25/31] binman: Mention section attributes in docs Simon Glass
[U-Boot] [PATCH 26/31] binman: Support hashing entries Simon Glass
[U-Boot] [PATCH 27/31] binman: Support x86 microcode in TPL Simon Glass
[U-Boot] [PATCH 28/31] binman: Record the parent section of each section Simon Glass
[U-Boot] [PATCH 29/31] binman: Correct fmap output on x86 Simon Glass
[U-Boot] [PATCH 30/31] binman: Support ELF files for U-Boot and SPL Simon Glass
[U-Boot] [PATCH 31/31] binman: Allow writing a map file when something goes wrong Simon Glass
[U-Boot] [PATCH v3 1/4] core: Add functions to set properties in live-tree Simon Glass
[U-Boot] [PATCH v3 3/4] core: Add dev_{disable,enable}_by_path Simon Glass
[U-Boot] [PATCH v3 2/4] test: Add tests for DT-manipulation functions Simon Glass
[U-Boot] [PATCH v3 4/4] test: Add tests for dev_{enable, disable}_by_path Simon Glass
[U-Boot] [PATCH v4 1/3] drivers: Add board uclass Simon Glass
[U-Boot] [PATCH v4 2/3] board: Add gazerbeam driver Simon Glass
[U-Boot] [PATCH v4 3/3] test: Add tests for board uclass Simon Glass
[U-Boot] [RFC][PATCH] cmd: clk: Add trivial implementation of clock dump for DM Simon Glass
[U-Boot] [PATCH v2 2/3] fdt: fdtdec_setup_memory_banksize() use livetree Simon Glass
[U-Boot] [PATCH] include/clk.h: Fix the name of the clock uclass in comment. Simon Glass
[U-Boot] [PATCH] include/dm.h: Remove duplicated include directive. Simon Glass
[U-Boot] [PATCH] buildman: Avoid hanging when the config changes Simon Glass
[U-Boot] [PATCH] sandbox: Add an explanation of the sandbox variants Simon Glass
[U-Boot] [PATCH v2 1/4] firmware: Add FIRMWARE config prompt string Simon Glass
[U-Boot] [PATCH v2 4/4] dm: test: Add "/firmware" node scan test Simon Glass
[U-Boot] [PATCH v4 04/19] mmc: rpmb: add mmc_rpmb_route_frames() Simon Glass
[U-Boot] [PATCH v4 10/19] optee: support routing of rpmb data frames to mmc Simon Glass
[U-Boot] [PATCH v4 11/19] tee: optee: support AVB trusted application Simon Glass
[U-Boot] [PATCH v4 14/19] tee: add sandbox driver Simon Glass
[U-Boot] [PATCH v4 18/19] avb_verify: support sandbox configuration Simon Glass
[U-Boot] [PATCH 03/22] Add core support for a bloblist to convey data from SPL Simon Glass
[U-Boot] [PATCH v4 00/19] AVB using OP-TEE Simon Glass
[U-Boot] [PATCH v3 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs Simon Glass
[U-Boot] [PATCH v3 3/4] rockchip: rk3399: Add Rock960 CE board support Simon Glass
[U-Boot] [PATCH v3 4/4] rockchip: rk3399: Add Ficus EE board support Simon Glass
[U-Boot] [PATCH 1/2] test/py: test_fs: remove fs_type argument from umount_fs() Simon Glass
[U-Boot] [PATCH 2/2] test/py: test_fs: add docstring comments to helper functions Simon Glass
[U-Boot] [PATCH 00/27] virtio: Introduce VirtIO driver support Simon Glass
[U-Boot] [PATCH v9 07/16] mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8 Simon Glass
[U-Boot] [PATCH v9 12/16] regmap: Add endianness support Simon Glass
[U-Boot] [PATCH 2/7] drivers: spi: cf_spi: migrate to DM and DT Simon Glass
[U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers Simon Glass
[U-Boot] [PATCH V2 1/2] ofnode: Replace of_n_addr_cells with of_n_size_cells Simon Glass
[U-Boot] [PATCH V2 2/2] ofnode: Add missing address translation into ofnode_get_addr_size() Simon Glass
[U-Boot] [PATCH v2 4/7] net: ftgmac100: Add support for the Aspeed SoC Simon Glass
[U-Boot] [PATCH v2 5/7] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Simon Glass
[U-Boot] [PATCH v2 7/7] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Simon Glass
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Simon Glass
[U-Boot] [PATCH] dm: core: Widen the dump tree to show more of the driver's name. Simon Glass
[U-Boot] [PATCH v2 00/23] spl: Add features for passing info from SPL to U-Boot proper Simon Glass
[U-Boot] [PATCH v3 15/20] tee: add sandbox driver Simon Glass
[U-Boot] [PATCH v2 01/23] log: Correct definition of log_msg_ret() Simon Glass
[U-Boot] [PATCH v2 02/23] spl: Add support for logging in SPL and TPL Simon Glass
[U-Boot] [PATCH v2 03/23] Add core support for a bloblist to convey data from SPL Simon Glass
[U-Boot] [PATCH v2 04/23] spl: Set up the bloblist in SPL Simon Glass
[U-Boot] [PATCH v2 05/23] bloblist: Locate bloblist in U-Boot Simon Glass
[U-Boot] [PATCH v2 06/23] test: Add a simple test for bloblist Simon Glass
[U-Boot] [PATCH v2 07/23] Add bloblist documentation Simon Glass
[U-Boot] [PATCH v2 08/23] spl: Support hash, input, pch, pci, rtc, tpm in SPL Simon Glass
[U-Boot] [PATCH v2 09/23] spl: Add a define for SPL_TPL_PROMPT Simon Glass
[U-Boot] [PATCH v2 10/23] spl: Make SPL_DISABLE_BANNER_PRINT a positive option Simon Glass
[U-Boot] [PATCH v2 11/23] spl: Add a comment to spl_set_bd() Simon Glass
[U-Boot] [PATCH v2 12/23] spl: Print a message if we are unable to load an image Simon Glass
[U-Boot] [PATCH v2 13/23] sandbox: Add a memory map to the sandbox README Simon Glass
[U-Boot] [PATCH v2 14/23] test/py: Add a way to pass flags to sandbox Simon Glass
[U-Boot] [PATCH v2 15/23] sandbox: Add an option to display of-platdata in SPL Simon Glass
[U-Boot] [PATCH v2 16/23] sandbox: Drop the deprecated 'sb' command Simon Glass
[U-Boot] [PATCH v2 17/23] sandbox: Add a new 'sb' command Simon Glass
[U-Boot] [PATCH v2 18/23] sandbox: Allow puts() output before global_data is set up Simon Glass
[U-Boot] [PATCH v2 19/23] sandbox: Refactor code to create os_jump_to_file() Simon Glass
[U-Boot] [PATCH v2 20/23] sandbox: Use malloc() and free() from os layer Simon Glass
[U-Boot] [PATCH v2 21/23] sandbox: Filter arguments when starting U-Boot Simon Glass
[U-Boot] [PATCH v2 22/23] sandbox: Boot in U-Boot through the standard call Simon Glass
[U-Boot] [PATCH v2 23/23] spl: Add support for passing handoff info to U-Boot proper Simon Glass
[U-Boot] [PATCH v2 0/9] Add pinmux command Simon Glass
[U-Boot] [PATCH v2 01/17] test/py: ignore console read exceptions after test failure Simon Glass
[U-Boot] [PATCH v2 3/9] dm: uclass: Add uclass_foreach_dev_probe Simon Glass
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Simon Glass
[U-Boot] [PATCH 00/22] spl: Add features for passing info from SPL to U-Boot proper Simon Glass
[U-Boot] [PATCH 2/2] pci: Change the first CFG read to Vendor ID in enumeration Simon Glass
[U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos Simon Glass
[U-Boot] [PATCH v2 03/23] Add core support for a bloblist to convey data from SPL Simon Glass
[U-Boot] [PATCH] travis: Add sandbox/clang-7 support Simon Glass
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Glass
[U-Boot] [PATCH v4 00/19] AVB using OP-TEE Simon Glass
[U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos Simon Glass
[U-Boot] [PATCH] tests/test_bind.py: Update test to match the wider 'dm tree' output Simon Glass
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Simon Glass
[U-Boot] [PATCH 1/4] rsa: use new openssl API to create signature Simon Glass
[U-Boot] [PATCH 2/4] rsa: add a structure for the padding Simon Glass
[U-Boot] [PATCH 00/27] virtio: Introduce VirtIO driver support Simon Glass
[U-Boot] [RFC PATCH v2 3/3] tools: Add a tool to get an overview of the usage of CONFIG options Simon Glass
[U-Boot] [RFC PATCH v2 2/3] tools: Add a tool to get a list of defconfigs based on filters Simon Glass
[U-Boot] [RFC PATCH v2 1/3] tools: moveconfig: Add an option to build a fuller database of options Simon Glass
[U-Boot] [PATCH 4/4] doc: uImage.FIT: signature.txt: add option padding Simon Glass
[U-Boot] [PATCH 3/4] rsa: add support of padding pss Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Glass
[U-Boot] [PATCH 1/1] test: overlay: add missing include Simon Glass
[U-Boot] 4 failures with 'ut dm' Simon Glass
[U-Boot] [PATCH v2 1/8] dm: cpu: Fix print_cpuinfo() output Simon Glass
[U-Boot] [PATCH v2 2/8] cpu: mpc83xx: Remove unnecessary characters in the description string Simon Glass
[U-Boot] [PATCH v2 3/8] dm: util: Add a livetree equivalent API of dm_fdt_pre_reloc() Simon Glass
[U-Boot] [PATCH v2 4/8] dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt() Simon Glass
[U-Boot] [PATCH v2 5/8] dm: Correct pre_reloc_only parameter description in several APIs' comments Simon Glass
[U-Boot] [PATCH v2 6/8] dm: core: Mirror the chosen node parse logic in the livetree scanning Simon Glass
[U-Boot] [PATCH v2 7/8] test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flag Simon Glass
[U-Boot] [PATCH v2 8/8] timer: Sort Kconfig driver entries Simon Glass
[U-Boot] [PATCH v2 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT Simon Glass
[U-Boot] [PATCH v2 02/19] dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip Simon Glass
[U-Boot] [PATCH v2 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL Simon Glass
[U-Boot] [PATCH v2 08/19] dts: am43x: omap5: Add node for I2C in SPL Simon Glass
[U-Boot] [PATCH v2 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently Simon Glass
[U-Boot] [PATCH v2 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig Simon Glass
[U-Boot] [PATCH v2 18/19] drivers: core: nullify gd->dm_root after dm_uninit() Simon Glass
[U-Boot] [PATCH] image-fdt: reserve lmb for fdt Simon Glass
[U-Boot] tests/test_bind.py: Update test to match the wider 'dm tree' output Simon Glass
[U-Boot] [PATCH 03/27] virtio: Add codes for virtual queue/ring management Simon Glass
[U-Boot] [PATCH 1/4] x86: Specify -march=core2 to build 64-bit U-Boot proper Simon Glass
[U-Boot] [PATCH v2 02/19] dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip Simon Glass
[U-Boot] [PATCH v10 12/16] regmap: Add endianness support Simon Glass
[U-Boot] [PATCH v10 08/16] regmap: Add raw read/write functions Simon Glass
[U-Boot] [PATCH v2 02/18] sandbox: Unprotect DATA regions in bus tests Simon Glass
[U-Boot] [PATCH v11 0/6] efi_loader: Code refactoring and improvement Simon Glass
[U-Boot] [PATCH v11 1/6] sandbox: Put CPUs under a cpu-bus node Simon Glass
[U-Boot] [PATCH v11 2/6] efi_loader: Drop setup_ok Simon Glass
[U-Boot] [PATCH v11 3/6] sandbox: smbios: Update to support sandbox Simon Glass
[U-Boot] [PATCH v11 4/6] efi: Split out test init/uninit into functions Simon Glass
[U-Boot] [PATCH v11 5/6] efi: Create a function to set up for running EFI code Simon Glass
[U-Boot] [PATCH v11 6/6] efi: Rename bootefi_test_finish() to bootefi_run_finish() Simon Glass
[U-Boot] [PATCH v5 13/13] buildman: Add a --boards option to specify particular boards to build Simon Glass
[U-Boot] [PATCH v9 10/18] sandbox: Try to start the RAM buffer at a particular address Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH 01/15] sandbox: Unprotect DATA regions in bus tests Simon Glass
[U-Boot] Errors when starting sandbox Simon Glass
[U-Boot] [PATCH v3 5/9] pinctrl: stm32: Add get_pins_count() ops Simon Glass
[U-Boot] [PATCH v3 6/9] pinctrl: stm32: Add get_pin_name() ops Simon Glass
[U-Boot] [PATCH v3 7/9] pinctrl: stm32: Add get_pin_muxing() ops Simon Glass
[U-Boot] [PATCH v3 9/9] pinctrl: sandbox: Add get_pin_muxing ops support Simon Glass
[U-Boot] [PATCH] syscon: reset node list syscon_list after relocation Simon Glass
[U-Boot] [U-Boot,11/45] rtc: Allow use of RTC in SPL and TPL Simon Glass
[U-Boot] [PATCH 05/12] x86: qemu: enable CONFIG_SPL_DM_RTC Simon Glass
[U-Boot] [PATCH 1/1] x86: qemu: enable CONFIG_SPL_DM_RTC Simon Glass
[U-Boot] [PATCH 3/4] cmd: adc: print single conversion also in uV Simon Glass
[U-Boot] [PATCH 0/4] Add adc uclass's channel mask and conversion helpers and enhance adc cmd Simon Glass
[U-Boot] [PATCH 2/4] cmd: adc: add info on channel mask Simon Glass
[U-Boot] [PATCH 4/4] cmd: adc: add an option to scan some or all available channels Simon Glass
[U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init Simon Glass
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Glass
[U-Boot] [PATCH v11 2/6] efi_loader: Drop setup_ok Simon Glass
[U-Boot] [PATCH] drivers: serial: probe all serial devices Simon Glass
[U-Boot] [PATCH] watchdog: aspeed: restore default value of reset_mask Simon Glass
[U-Boot] [PATCH v11 3/6] sandbox: smbios: Update to support sandbox Simon Glass
[U-Boot] [PATCH 1/1] sandbox: remove stray DEBUG Simon Glass
[U-Boot] efi_loader: handling of global data in *.efi files Simon Glass
[U-Boot] [RFC] fit: include uncompression into fit_image_load Simon Glass
[U-Boot] [PATCH v2 02/14] x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build Simon Glass
[U-Boot] [PATCH v2 03/14] x86: doc: Mention qemu-x86_64 support Simon Glass
[U-Boot] [PATCH v2 10/14] x86: tsc: Introduce config option for early timer frequency Simon Glass
[U-Boot] [PATCH v2 11/14] x86: quark: Specify X86_TSC_TIMER_EARLY_FREQ Simon Glass
[U-Boot] [PATCH v2 12/14] travis: Generate grub_x64.efi for qemu-x86_64 Simon Glass
[U-Boot] [PATCH v2 13/14] travis: Update to use QEMU 3.0.0 for testing Simon Glass
[U-Boot] [PATCH v2 14/14] travis: Add qemu-x86_64 target for test.py testing Simon Glass
[U-Boot] [PATCH 07/12] x86: put global data pointer into the .data section Simon Glass
[U-Boot] [PATCH 1/1] sandbox: README: setting environment variables Simon Glass
[U-Boot] [PATCH v3 05/11] drivers: serial: mcfuart: add Kconfig option Simon Glass
[U-Boot] [PATCH v3 08/11] m68k: enabling long jumps on mcf54x5 SoCs Simon Glass
[U-Boot] [PATCH v3 04/11] drivers: serial: mcfuart: add DT support Simon Glass
[U-Boot] [PATCH v3 02/11] drivers: spi: cf_spi: add Kconfig option Simon Glass
[U-Boot] [PATCH v3 06/11] m68k: architecture changes to support fdt Simon Glass
[U-Boot] [PATCH v3 03/11] drivers: spi: cf_spi: convert to driver model Simon Glass
[U-Boot] [PATCH v3 07/11] m68k: add initial dts files for all m68k boards Simon Glass
[U-Boot] [PATCH v3 09/11] configs: enable use of DT for all m68k boards Simon Glass
[U-Boot] [PATCH v3 10/11] configs: add DM_SPI config option Simon Glass
[U-Boot] [PATCH v3 11/11] configs: remove CONFIG_SYS_DSPI_XX references Simon Glass
[U-Boot] [PATCH v3 3/9] dm: uclass: Add uclass_foreach_dev_probe Simon Glass
[U-Boot] [PATCH v3 01/31] dm: core: Allow uclass to set up a device's child after it is probed Simon Glass
[U-Boot] [PATCH v3 02/31] test: dm: core: Add test case for uclass driver's child_post_probe() Simon Glass
[U-Boot] [PATCH v3 03/31] riscv: bootm: Add dm_remove_devices_flags() call to do_bootm_linux() Simon Glass
[U-Boot] [PATCH v3 04/31] dm: Add a new uclass driver for VirtIO transport devices Simon Glass
[U-Boot] [PATCH v3 29/31] virtio: Add a Sandbox transport driver Simon Glass
[U-Boot] [PATCH v3 30/31] test: dm: virtio: Add test cases for virtio uclass Simon Glass
[U-Boot] [PATCH v11 08/16] regmap: Add raw read/write functions Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH 2/2] pci: Change the first CFG read to Vendor ID in enumeration Simon Glass
[U-Boot] [PATCH] travis: Add sandbox/clang-7 support Simon Glass
[U-Boot] [PATCH v3 1/9] dm: pinctrl: Add get_pin_muxing() ops Simon Glass
[U-Boot] [PATCH v3 2/9] dm: pinctrl: Add pinctrl_get_pin_name and pinctrl_get_pins_count Simon Glass
[U-Boot] [PATCH v3 4/9] cmd: pinmux: Add pinmux command Simon Glass
[U-Boot] [RFC] fit: include uncompression into fit_image_load Simon Glass
[U-Boot] Please pull u-boot-x86 Simon Glass
[U-Boot] [PATCH 2/4] cmd: adc: add info on channel mask Simon Glass
[U-Boot] [PATCH v11 3/6] sandbox: smbios: Update to support sandbox Simon Glass
[U-Boot] [RFC] fit: include uncompression into fit_image_load Simon Glass
[U-Boot] [PATCH 1/1] efi_selftest: do not write to linker generated array Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH v3 1/9] dm: pinctrl: Add get_pin_muxing() ops Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH 01/13] arm: stm32mp: Remove DM_FLAG_PRE_RELOC flag Simon Glass
[U-Boot] [PATCH 02/13] clk: Remove DM_FLAG_PRE_RELOC flag in various drivers Simon Glass
[U-Boot] [PATCH 03/13] gpio: Remove DM_FLAG_PRE_RELOC flag in various drivers Simon Glass
[U-Boot] [PATCH 04/13] i2c: omap24xx: Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check Simon Glass
[U-Boot] [PATCH 05/13] mmc: omap: Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check Simon Glass
[U-Boot] [PATCH 06/13] pinctrl: Remove DM_FLAG_PRE_RELOC flag in various drivers Simon Glass
[U-Boot] [PATCH 07/13] ram: bmips: Remove DM_FLAG_PRE_RELOC flag Simon Glass
[U-Boot] [PATCH 08/13] timer: Remove DM_FLAG_PRE_RELOC flag in various drivers Simon Glass
[U-Boot] [PATCH 09/13] serial: Remove DM_FLAG_PRE_RELOC flag in various drivers Simon Glass
[U-Boot] [PATCH 10/13] sysreset: Remove DM_FLAG_PRE_RELOC flag in various drivers Simon Glass
[U-Boot] [PATCH 11/13] video: simplefb: Remove DM_FLAG_PRE_RELOC flag Simon Glass
[U-Boot] [PATCH 12/13] watchdog: Remove DM_FLAG_PRE_RELOC flag in various drivers Simon Glass
[U-Boot] [PATCH 13/13] dm: doc: Update description of pre-relocation support Simon Glass
[U-Boot] [PATCH v2 09/18] watchdog: MediaTek: add watchdog driver for MediaTek SoCs Simon Glass
[U-Boot] [PATCH v2 02/18] arm: dts: MediaTek: add device tree for MT7629 Simon Glass
[U-Boot] [PATCH v2 03/18] arm: dts: MediaTek: add device tree for MT7623 Simon Glass
[U-Boot] [PATCH v2 04/18] arm: MediaTek: add basic support for MT7629 boards Simon Glass
[U-Boot] [PATCH v2 05/18] arm: MediaTek: add basic support for MT7623 boards Simon Glass
[U-Boot] [PATCH v2 06/18] clk: MediaTek: add clock driver for MT7629 SoC. Simon Glass
[U-Boot] [PATCH v2 07/18] clk: MediaTek: add clock driver for MT7623 SoC. Simon Glass
[U-Boot] [PATCH v2 08/18] timer: MediaTek: add timer driver for MediaTek SoCs Simon Glass
[U-Boot] [PATCH v2 01/18] tools: MediaTek: add MTK boot header generation to mkimage Simon Glass
[U-Boot] [PATCH v2 10/18] pinctrl: MediaTek: add pinctrl driver for MT7629 SoC Simon Glass
[U-Boot] [PATCH v2 11/18] pinctrl: MediaTek: add pinctrl driver for MT7623 SoC Simon Glass
[U-Boot] [PATCH v2 12/18] power domain: MediaTek: add power domain driver for MT7629 SoC Simon Glass
[U-Boot] [PATCH v2 13/18] power domain: MediaTek: add power domain driver for MT7623 SoC Simon Glass
[U-Boot] [PATCH v2 14/18] serial: 16550: allow the driver to support MediaTek serial Simon Glass
[U-Boot] [PATCH v2 15/18] ram: MediaTek: add DDR3 driver for MT7629 SoC Simon Glass
[U-Boot] [PATCH v2 16/18] mmc: mtk-sd: add SD/MMC host controller driver for MT7623 SoC Simon Glass
[U-Boot] [PATCH v2 17/18] spi: mtk_qspi: add qspi driver for MT7629 SoC Simon Glass
[U-Boot] [PATCH v2 18/18] MAINTAINERS: add an entry for MediaTek Simon Glass
[U-Boot] [PATCH v11 07/16] mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8 Simon Glass
[U-Boot] [PATCH v3 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT Simon Glass
[U-Boot] [PATCH 1/1] efi_selftest: rename setup_ok Simon Glass
[U-Boot] [PATCH 1/1] efi_selftest: do not write to linker generated array Simon Glass
[U-Boot] [PATCH v3 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig Simon Glass
[U-Boot] [PATCH v2 15/18] ram: MediaTek: add DDR3 driver for MT7629 SoC Simon Glass
[U-Boot] [PATCH] drivers: cosmetic: Convert SPDX license tags to Linux Kernel style Simon Glass
[U-Boot] [PATCH] syscon: update syscon_node_to_regmap to use the DM functions Simon Glass
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Christian Gmeiner
[U-Boot] [PATCH 2/4] nfs: factor out generic reply error handling Christian Gmeiner
[U-Boot] [PATCH 3/4] nfs: handle rpc errors for mount calls Christian Gmeiner
[U-Boot] [PATCH 4/4] net: add NFSv1 support Christian Gmeiner
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Christian Gmeiner
[U-Boot] [PATCH] bootm: Add board specific OS preboot hook Christian Gmeiner
[U-Boot] [PATCH v2 0/7] Support for the Faraday ftgmac100 controller Cédric Le Goater
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Cédric Le Goater
[U-Boot] [PATCH v2 2/7] net: Re-add support for the Faraday ftgmac100 controller Cédric Le Goater
[U-Boot] [PATCH v2 3/7] aspeed: ast2500: fix missing break in D2PLL clock enablement Cédric Le Goater
[U-Boot] [PATCH v2 4/7] net: ftgmac100: Add support for the Aspeed SoC Cédric Le Goater
[U-Boot] [PATCH v2 5/7] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Cédric Le Goater
[U-Boot] [PATCH v2 6/7] aspeed: Activate ethernet devices on the ast2500 Eval Board Cédric Le Goater
[U-Boot] [PATCH v2 7/7] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Cédric Le Goater
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Cédric Le Goater
[U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers Cédric Le Goater
[U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers Cédric Le Goater
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Cédric Le Goater
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Cédric Le Goater
[U-Boot] [PATCH v3 00/13] Support for the Faraday ftgmac100 controller Cédric Le Goater
[U-Boot] [PATCH v3 01/13] net: ftgmac100: use the BIT() macro Cédric Le Goater
[U-Boot] [PATCH v3 02/13] net: ftgmac100: use the aligned() macro Cédric Le Goater
[U-Boot] [PATCH v3 03/13] net: ftgmac100: convert to driver model Cédric Le Goater
[U-Boot] [PATCH v3 04/13] net: ftgmac100: use setbits_le32() in the reset method Cédric Le Goater
[U-Boot] [PATCH v3 05/13] net: ftgmac100: add MDIO bus and phylib support Cédric Le Goater
[U-Boot] [PATCH v3 06/13] net: ftgmac100: convert the RX/TX descriptor arrays Cédric Le Goater
[U-Boot] [PATCH v3 07/13] net: ftgmac100: handle timeouts when transmitting Cédric Le Goater
[U-Boot] [PATCH v3 08/13] net: ftgmac100: add clock support Cédric Le Goater
[U-Boot] [PATCH v3 09/13] aspeed: ast2500: fix missing break in D2PLL clock enablement Cédric Le Goater
[U-Boot] [PATCH v3 10/13] net: ftgmac100: Add support for the Aspeed SoC Cédric Le Goater
[U-Boot] [PATCH v3 11/13] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Cédric Le Goater
[U-Boot] [PATCH v3 12/13] aspeed: Activate ethernet devices on the ast2500 Eval Board Cédric Le Goater
[U-Boot] [PATCH v3 13/13] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Cédric Le Goater
[U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers Cédric Le Goater
[U-Boot] [PATCH v3 03/13] net: ftgmac100: convert to driver model Cédric Le Goater
[U-Boot] [PATCH v3 03/13] net: ftgmac100: convert to driver model Cédric Le Goater
[U-Boot] [PATCH v3 07/13] net: ftgmac100: handle timeouts when transmitting Cédric Le Goater
[U-Boot] [PATCH v4 00/13] Support for the Faraday ftgmac100 controller Cédric Le Goater
[U-Boot] [PATCH v4 01/13] net: ftgmac100: use the BIT() macro Cédric Le Goater
[U-Boot] [PATCH v4 02/13] net: ftgmac100: use the aligned() macro Cédric Le Goater
[U-Boot] [PATCH v4 03/13] net: ftgmac100: convert to driver model Cédric Le Goater
[U-Boot] [PATCH v4 04/13] net: ftgmac100: use setbits_le32() in the reset method Cédric Le Goater
[U-Boot] [PATCH v4 05/13] net: ftgmac100: add MDIO bus and phylib support Cédric Le Goater
[U-Boot] [PATCH v4 06/13] net: ftgmac100: convert the RX/TX descriptor arrays Cédric Le Goater
[U-Boot] [PATCH v4 07/13] net: ftgmac100: handle timeouts when transmitting Cédric Le Goater
[U-Boot] [PATCH v4 08/13] net: ftgmac100: add clock support Cédric Le Goater
[U-Boot] [PATCH v4 09/13] aspeed: ast2500: fix missing break in D2PLL clock enablement Cédric Le Goater
[U-Boot] [PATCH v4 10/13] net: ftgmac100: Add support for the Aspeed SoC Cédric Le Goater
[U-Boot] [PATCH v4 11/13] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Cédric Le Goater
[U-Boot] [PATCH v4 12/13] aspeed: Activate ethernet devices on the ast2500 Eval Board Cédric Le Goater
[U-Boot] [PATCH v4 13/13] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Cédric Le Goater
[U-Boot] [PATCH] watchdog: aspeed: restore default value of reset_mask Cédric Le Goater
[U-Boot] [PATCH v4 07/13] net: ftgmac100: handle timeouts when transmitting Cédric Le Goater
[U-Boot] [PATCH v5 00/13] Support for the Faraday ftgmac100 controller Cédric Le Goater
[U-Boot] [PATCH v5 01/13] net: ftgmac100: use the BIT() macro Cédric Le Goater
[U-Boot] [PATCH v5 02/13] net: ftgmac100: use the aligned() macro Cédric Le Goater
[U-Boot] [PATCH v5 03/13] net: ftgmac100: convert to driver model Cédric Le Goater
[U-Boot] [PATCH v5 04/13] net: ftgmac100: use setbits_le32() in the reset method Cédric Le Goater
[U-Boot] [PATCH v5 05/13] net: ftgmac100: add MDIO bus and phylib support Cédric Le Goater
[U-Boot] [PATCH v5 06/13] net: ftgmac100: convert the RX/TX descriptor arrays Cédric Le Goater
[U-Boot] [PATCH v5 07/13] net: ftgmac100: handle timeouts when transmitting Cédric Le Goater
[U-Boot] [PATCH v5 08/13] net: ftgmac100: add clock support Cédric Le Goater
[U-Boot] [PATCH v5 09/13] aspeed: ast2500: fix missing break in D2PLL clock enablement Cédric Le Goater
[U-Boot] [PATCH v5 10/13] net: ftgmac100: Add support for the Aspeed SoC Cédric Le Goater
[U-Boot] [PATCH v5 11/13] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Cédric Le Goater
[U-Boot] [PATCH v5 12/13] aspeed: Activate ethernet devices on the ast2500 Eval Board Cédric Le Goater
[U-Boot] [PATCH v5 13/13] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Cédric Le Goater
[U-Boot] [PATCH] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Simon Goldschmidt
[U-Boot] [PATCH] spl: ram: Fix u_boot_pos calculation Simon Goldschmidt
[U-Boot] [PATCH] spl: ram: Fix u_boot_pos calculation Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI Simon Goldschmidt
[U-Boot] [PATCH v2] sf: remove spi-flash chip names from SPL binary Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH] bootm: Add board specific OS preboot hook Simon Goldschmidt
[U-Boot] [PATCH v2] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH v2] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI Simon Goldschmidt
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Goldschmidt
[U-Boot] [PATCH v2] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH v3] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH v4] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH v4] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH v4] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH v5] arm: socfpga: fix SPL booting from fpga OnChip RAM Simon Goldschmidt
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Goldschmidt
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Goldschmidt
[U-Boot] [Patch v3] socfpga: clean up sfp generation Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fpga: fix type of local variable Simon Goldschmidt
[U-Boot] [RFC] fit: include uncompression into fit_image_load Simon Goldschmidt
[U-Boot] [RFC] fit: include uncompression into fit_image_load Simon Goldschmidt
[U-Boot] [PATCH] debug uart: don't print before initialization Simon Goldschmidt
[U-Boot] socfpga cyclone5 dts Simon Goldschmidt
[U-Boot] socfpga cyclone5 dts Simon Goldschmidt
[U-Boot] [RFC] fit: include uncompression into fit_image_load Simon Goldschmidt
[U-Boot] [RFC] fit: include uncompression into fit_image_load Simon Goldschmidt
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Simon Goldschmidt
[U-Boot] socfpga cyclone5 dts Simon Goldschmidt
[U-Boot] socfpga cyclone5 dts Simon Goldschmidt
[U-Boot] socfpga cyclone5 dts Simon Goldschmidt
[U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init Simon Goldschmidt
[U-Boot] socfpga cyclone5 dts Simon Goldschmidt
[U-Boot] [PATCH v1 0/3] dts: arm: socfpga: merge gen5 devicetrees from linux Simon Goldschmidt
[U-Boot] [PATCH v1 1/3] gpio: dwapb_gpio: fix binding without bank-name property Simon Goldschmidt
[U-Boot] [PATCH v1 2/3] spi: cadence_qspi: use "cdns, qspi-nor" as compatible Simon Goldschmidt
[U-Boot] [PATCH v1 3/3] dts: arm: socfpga: merge gen5 devicetrees from linux Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fix bootcounter by reserving SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fix bootcounter by reserving SRAM Simon Goldschmidt
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: fix bootcounter by reserving SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION Simon Goldschmidt
[U-Boot] [PATCH v2] dm: spi: prevent setting a speed of 0 Hz Simon Goldschmidt
[U-Boot] [PATCH 0/3] Read SFDP parameters and access flash above 16MB Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: check total size of SPL Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: check total size of SPL Simon Goldschmidt
[U-Boot] [PATCH v1 2/3] spi: cadence_qspi: use "cdns, qspi-nor" as compatible Simon Goldschmidt
[U-Boot] [PATCH] arm: socfpga: check total size of SPL Simon Goldschmidt
[U-Boot] [PATCH v2] dm: spi: prevent setting a speed of 0 Hz Simon Goldschmidt
[U-Boot] [PATCH v2] sf: remove spi-flash chip names from SPL binary Simon Goldschmidt
[U-Boot] [PATCH 0/3] Read SFDP parameters and access flash above 16MB Simon Goldschmidt
[U-Boot] [PATCH 0/3] Read SFDP parameters and access flash above 16MB Simon Goldschmidt
[U-Boot] [PATCH 1/3] mtd/spi: Add JEDEC SFDP support in SPI framework Simon Goldschmidt
[U-Boot] [PATCH 0/3] Read SFDP parameters and access flash above 16MB Simon Goldschmidt
[U-Boot] [RFC] efi: workaround for SCT (against unicode collation protocol) Alexander Graf
[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols Alexander Graf
[U-Boot] [PATCH v3 1/1] efi_loader: PSCI reset and shutdown Alexander Graf
[U-Boot] [PATCH v3 1/1] efi_loader: PSCI reset and shutdown Alexander Graf
[U-Boot] [PATCH v11 3/6] sandbox: smbios: Update to support sandbox Alexander Graf
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r Alexander Graf
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script Alexander Graf
[U-Boot] [PATCH 1/3] efi_loader: support USB boot in distro boot script Alexander Graf
[U-Boot] [PATCH 2/3] ARM: qemu-arm: enable usb mass storage in default configuration Alexander Graf
[U-Boot] [PATCH 3/3] ARM: qemu-arm: enable USB boot in distro boot with UEFI Alexander Graf
[U-Boot] [PATCH 1/1] sandbox: remove stray DEBUG Alexander Graf
[U-Boot] efi_loader: handling of global data in *.efi files Alexander Graf
[U-Boot] [U-Boot, v2, 08/14] efi_loader: fix relocation on x86_64 Alexander Graf
[U-Boot] [PATCH 1/1] cmd: add el command Alexander Graf
[U-Boot] [PATCH v2 1/1, for v2018.11-rc2] efi_loader: fix simple network protocol Alexander Graf
[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs Alexander Graf
[U-Boot] [PATCH] serial: pl01x: Get clock from clock node if no clock property found Alexander Graf
[U-Boot] [PATCH v2 1/6] efi_loader: Generate Microsoft PE format compliant images Alexander Graf
[U-Boot] [PATCH 01/15] sandbox: Unprotect DATA regions in bus tests Alexander Graf
[U-Boot] fs: fat: Fix warning in normalize_longname() Alexander Graf
[U-Boot] efi_loader: Fix warning in efi_load_image() Alexander Graf
[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs Alexander Graf
[U-Boot] [PATCH] serial: pl01x: Get clock from clock node if no clock property found Alexander Graf
[U-Boot] [PATCH 1/1] efi_selftest: fix typos Alexander Graf
[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs Alexander Graf
[U-Boot] [PATCH v2 1/6] efi_loader: Generate Microsoft PE format compliant images Alexander Graf
[U-Boot] [U-Boot, v2, 5/6] arm: efi: Generate Microsoft PE format compliant images Alexander Graf
[U-Boot] [U-Boot, v2, 6/6] riscv: efi: Generate Microsoft PE format compliant images Alexander Graf
[U-Boot] [U-Boot, v2, 2/6] x86: efi: payload: Generate Microsoft PE format compliant image Alexander Graf
[U-Boot] [U-Boot,v2,4/6] pe.h: Add characteristics defines Alexander Graf
[U-Boot] [U-Boot, v2, 1/6] efi_loader: Generate Microsoft PE format compliant images Alexander Graf
[U-Boot] [U-Boot, v2, 3/6] x86: efi: app: Generate Microsoft PE format compliant image Alexander Graf
[U-Boot] [PATCH v3 1/1] efi_loader: PSCI reset and shutdown Alexander Graf
[U-Boot] [U-Boot, v2, 08/14] efi_loader: fix relocation on x86_64 Alexander Graf
[U-Boot] [RFC] fit: include uncompression into fit_image_load Alexander Graf
[U-Boot] [PULL 2018.11] efi patch queue 2018-10-17 Alexander Graf
[U-Boot] [PATCH 0/6] efi: make efi and bootmgr more usable Alexander Graf
[U-Boot] [PATCH 3/6] efi_loader: bootmgr: add load option helper functions Alexander Graf
[U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option Alexander Graf
[U-Boot] [PATCH v4 1/1] efi_loader: PSCI reset and shutdown Alexander Graf
[U-Boot] [PATCH v4 1/1] efi_loader: PSCI reset and shutdown Alexander Graf
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r Alexander Graf
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script Alexander Graf
[U-Boot] [PATCH] distro: Imply USB_STORAGE when USB is available Alexander Graf
[U-Boot] [PATCH 3/6] efi_loader: bootmgr: add load option helper functions Alexander Graf
[U-Boot] [U-Boot, 1/1] efi_loader: fix typos in efi_device_path.c Alexander Graf
[U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option Alexander Graf
[U-Boot] [PATCH 0/6] efi: make efi and bootmgr more usable Alexander Graf
[U-Boot] [PATCH v11 3/6] sandbox: smbios: Update to support sandbox Alexander Graf
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script Alexander Graf
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r Alexander Graf
[U-Boot] efi-next: Kconfig: error: recursive dependency detected! Alexander Graf
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script Alexander Graf
[U-Boot] [PATCH] usb: Do not compile USB_STORAGE with !BLK && !DM_USB Alexander Graf
[U-Boot] [PATCH] usb: Do not compile USB_STORAGE with !BLK && !DM_USB Alexander Graf
[U-Boot] [PATCH] usb: Do not compile USB_STORAGE with !BLK && !DM_USB Alexander Graf
[U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option Alexander Graf
[U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script Alexander Graf
[U-Boot] [PATCH v11 3/6] sandbox: smbios: Update to support sandbox Alexander Graf
[U-Boot] [PATCH 2/5] ARM: rpi_3_32b_defconfig: Add FS_UUID command Alexander Graf
[U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script Alexander Graf
[U-Boot] [PATCH v2 24/29] riscv: store device tree passed by prior boot stage in environment Alexander Graf
[U-Boot] Question about booting Linux from efi_loader Alexander Graf
[U-Boot] [PATCH v2 24/29] riscv: store device tree passed by prior boot stage in environment Alexander Graf
[U-Boot] [PATCH v2 28/29] riscv: qemu: detect and boot the kernel passed by QEMU Alexander Graf
[U-Boot] Question about booting Linux from efi_loader Alexander Graf
[U-Boot] [PATCH v3 10/26] fs: fat: support write with non-zero offset Alexander Graf
[U-Boot] xzwrite Dell Green
[U-Boot] xzwrite Dell Green
[U-Boot] xzwrite Dell Green
[U-Boot] [PATCH] rockchip: Fix rkimage format for SPL boot over USB Daniel Gröber
[U-Boot] [PATCH 09/15] sandbox: video: Speed up video output Anatolij Gustschin
[U-Boot] [PATCH 22/45] video: Adjust video_clear() to return an error Anatolij Gustschin
[U-Boot] [PATCH 44/45] video: Tidy up a few comments in video.o Anatolij Gustschin
[U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos Anatolij Gustschin
[U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Anatolij Gustschin
[U-Boot] [PATCH V5 07/32] arm: global_data: add scu_dev for i.MX8 Anatolij Gustschin
[U-Boot] [PATCH V5 08/32] misc: add i.MX8 misc driver Anatolij Gustschin
[U-Boot] [PATCH v6 00/34] i.MX: Add i.MX8QXP support Anatolij Gustschin
[U-Boot] [PATCH v6 01/34] dt-bindings: pinctrl: add i.MX8QXP pads definition Anatolij Gustschin
[U-Boot] [PATCH v6 02/34] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks definition Anatolij Gustschin
[U-Boot] [PATCH v6 03/34] dt-bindings: soc: add i.MX8QXP pm and rsrc definition Anatolij Gustschin
[U-Boot] [PATCH v6 04/34] imx8: add scfw macro definition Anatolij Gustschin
[U-Boot] [PATCH v6 05/34] imx: add Kconfig entry for i.MX8QXP Anatolij Gustschin
[U-Boot] [PATCH v6 06/34] arm: build mach-imx for i.MX8 Anatolij Gustschin
[U-Boot] [PATCH v6 07/34] arm: global_data: add scu_dev for i.MX8 Anatolij Gustschin
[U-Boot] [PATCH v6 08/34] misc: add i.MX8 misc driver Anatolij Gustschin
[U-Boot] [PATCH v6 09/34] misc: imx8: add scfw api impementation Anatolij Gustschin
[U-Boot] [PATCH v6 10/34] imx: boot_mode: Add FLEXSPI boot entry Anatolij Gustschin
[U-Boot] [PATCH v6 11/34] imx8: add imx-regs header file Anatolij Gustschin
[U-Boot] [PATCH v6 12/34] imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined Anatolij Gustschin
[U-Boot] [PATCH v6 13/34] imx: add i.MX8 cpu type Anatolij Gustschin
[U-Boot] [PATCH v6 14/34] armv8: add cpu core helper functions Anatolij Gustschin
[U-Boot] [PATCH v6 15/34] imx8: add basic cpu support Anatolij Gustschin
[U-Boot] [PATCH v6 16/34] imx8: add boot device detection Anatolij Gustschin
[U-Boot] [PATCH v6 17/34] imx8: implement mmc_get_env_dev Anatolij Gustschin
[U-Boot] [PATCH v6 18/34] imx8: add mmu and dram related functions Anatolij Gustschin
[U-Boot] [PATCH v6 19/34] imx8: add arch_cpu_init arch_cpu_init_dm Anatolij Gustschin
[U-Boot] [PATCH v6 20/34] imx8: cpu: add function for reading FEC MAC from fuse Anatolij Gustschin
[U-Boot] [PATCH v6 21/34] imx8: cpu: add uclass based CPU driver Anatolij Gustschin
[U-Boot] [PATCH v6 22/34] imx8: add iomux configuration api Anatolij Gustschin
[U-Boot] [PATCH v6 23/34] imx8: add dummy clock Anatolij Gustschin
[U-Boot] [PATCH v6 24/34] gpio: mxc_gpio: add support for i.MX8 Anatolij Gustschin
[U-Boot] [PATCH v6 25/34] pinctrl: Add pinctrl driver for i.MX8 Anatolij Gustschin
[U-Boot] [PATCH v6 26/34] power: Add power domain driver for i.MX8 Anatolij Gustschin
[U-Boot] [PATCH v6 27/34] clk: imx: add clk driver for i.MX8QXP Anatolij Gustschin
[U-Boot] [PATCH v6 28/34] serial_lpuart: Update lpuart driver to support i.MX8 Anatolij Gustschin
[U-Boot] [PATCH v6 29/34] serial: lpuart: Enable RX and TX FIFO Anatolij Gustschin
[U-Boot] [PATCH v6 30/34] serial: lpuart: support uclass clk api Anatolij Gustschin
[U-Boot] [PATCH v6 31/34] fsl_esdhc: Update usdhc driver to support i.MX8 Anatolij Gustschin
[U-Boot] [PATCH v6 32/34] mmc: fsl_esdhc: add uclass clk support Anatolij Gustschin
[U-Boot] [PATCH v6 33/34] arm: dts: introduce dtsi for i.MX8QXP Anatolij Gustschin
[U-Boot] [PATCH v6 34/34] imx: add i.MX8QXP MEK board support Anatolij Gustschin
[U-Boot] [PATCH 27/41] net: fec: do not access reserved register for i.MX8 Anatolij Gustschin
[U-Boot] [PATCH] net: fec_mxc: fix phy-reset-gpios logic Anatolij Gustschin
[U-Boot] [PATCH] net: fec_mxc: add support for i.MX8X Anatolij Gustschin
[U-Boot] [PATCH] gpio: pca953x_gpio: fix DT GPIO flags translation Anatolij Gustschin
[U-Boot] [PATCH] gpio: pca953x: Clear the polarity invert register at init Anatolij Gustschin
[U-Boot] [PATCH] i2c: imx_lpi2c: fix typo and register base address format Anatolij Gustschin
[U-Boot] [PATCH 1/3] pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypass Anatolij Gustschin
[U-Boot] [PATCH v7 30/34] serial: lpuart: support uclass clk api Anatolij Gustschin
[U-Boot] Pull request: u-boot-staging Anatolij Gustschin
[U-Boot] Pull request: u-boot-staging Anatolij Gustschin
[U-Boot] [PATCH] i2c: imx_lpi2c: fix typo and register base address format Anatolij Gustschin
[U-Boot] Pull request: u-boot-staging Anatolij Gustschin
[U-Boot] [PATCH] net: fec_mxc: fix phy-reset-gpios logic Anatolij Gustschin
[U-Boot] [PATCH 4/5] sunxi: display: Mark sunxi_rgb2yuv_coef array as const Anatolij Gustschin
[U-Boot] [PATCH] imx: mkimage: avoid stop CI when required files not exists Anatolij Gustschin
[U-Boot] [PATCH V2] imx: mkimage: avoid stop CI when required files not exists Anatolij Gustschin
[U-Boot] Pull request: u-boot-net.git master Anatolij Gustschin
[U-Boot] [PATCH] fs: fat: fix reading non-cluster-aligned root directory Anssi Hannula
[U-Boot] [PATCH v6 34/34] imx: add i.MX8QXP MEK board support Tim Harvey
[U-Boot] [PATCH v6 34/34] imx: add i.MX8QXP MEK board support Tim Harvey
[U-Boot] [PATCH 0/3] Small fixes for Olimex MX23 based Olinuxino boards Michael Heimpold
[U-Boot] [PATCH 1/3] configs: drop CMD_CACHE from mx23_olinuxino_defconfig Michael Heimpold
[U-Boot] [PATCH 2/3] configs: mx23_olinuxino_defconfig: fix status led definition Michael Heimpold
[U-Boot] [PATCH 3/3] configs: mx23_olinuxino_defconfig: disable bootefi command Michael Heimpold
[U-Boot] Errors when starting sandbox Joe Hershberger
[U-Boot] Errors when starting sandbox Joe Hershberger
[U-Boot] Errors when starting sandbox Joe Hershberger
[U-Boot] [PATCH v4 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing Joe Hershberger
[U-Boot] [PATCH v4 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing Joe Hershberger
[U-Boot] [PATCH v4 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing Joe Hershberger
[U-Boot] [PATCH v4 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing Joe Hershberger
[U-Boot] [PATCH v4 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing Joe Hershberger
[U-Boot] [PATCH 00/10] net: fec: Code Improvement/cleanups Joe Hershberger
[U-Boot] [PATCH 00/10] net: fec: Code Improvement/cleanups Joe Hershberger
[U-Boot] [PATCH 00/10] net: fec: Code Improvement/cleanups Joe Hershberger
[U-Boot] [PATCH] linux/compat.h: Add netdev_### log macros Joe Hershberger
[U-Boot] [PATCH] linux/compat.h: Add netdev_### log macros Joe Hershberger
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Joe Hershberger
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Joe Hershberger
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Joe Hershberger
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Joe Hershberger
[U-Boot] [PATCH v2 1/7] net: Remove the Faraday ftgmac100 controller driver Joe Hershberger
[U-Boot] [PATCH v2 6/6] driver: net: fsl-mc: Add support of multiple phys for dpmac Joe Hershberger
[U-Boot] [PATCH v2 6/6] driver: net: fsl-mc: Add support of multiple phys for dpmac Joe Hershberger
[U-Boot] [PATCH v3 2/6] driver: net: fsl-mc: remove unused strcture elements Joe Hershberger
[U-Boot] [PATCH v3 2/6] driver: net: fsl-mc: remove unused strcture elements Joe Hershberger
[U-Boot] [PATCH] net/phy: Add phy-id for IN112525_S03 Joe Hershberger
[U-Boot] [PATCH] net/phy: Add phy-id for IN112525_S03 Joe Hershberger
[U-Boot] [PATCH] net/phy: Add phy-id for IN112525_S03 Joe Hershberger
[U-Boot] [PATCH] net/phy: Add phy-id for IN112525_S03 Joe Hershberger
[U-Boot] [PATCH] net: e1000: support 'write_hwaddr' in DM Joe Hershberger
[U-Boot] [PATCH] net: e1000: support 'write_hwaddr' in DM Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] linux/mii.h: Sync with Linux kernel v4.17 Joe Hershberger
[U-Boot] linux/mdio.h: Sync with Linux kernel v4.17 Joe Hershberger
[U-Boot] linux/compat.h: Add netdev_### log macros Joe Hershberger
[U-Boot] net: pch_gbe: Make probe/remove static Joe Hershberger
[U-Boot] linux/if_ether.h: Initial import from Linux kernel v4.17 Joe Hershberger
[U-Boot] net.h: Include linux/if_ether.h to avoid duplication Joe Hershberger
[U-Boot] linux/if_ether.h: Add VLAN related macros Joe Hershberger
[U-Boot] net: phy: ti: Add lane swapping support in the DP83867 TI's PHY driver Joe Hershberger
[U-Boot] net: phy: ti: Recover from "port mirroring" N/A MODE4 Joe Hershberger
[U-Boot] net: phy: ti: Add binding for the CLK_OUT pin muxing Joe Hershberger
[U-Boot] phy: Add 25G_AUI, XLAUI, CAUI2, CAUI4 related macros Joe Hershberger
[U-Boot] net: sandbox: Move disabled flag into priv struct Joe Hershberger
[U-Boot] net: sandbox: Refactor sandbox send function Joe Hershberger
[U-Boot] net: sandbox: Make the fake eth driver response configurable Joe Hershberger
[U-Boot] net: sandbox: Share the priv structure with tests Joe Hershberger
[U-Boot] net: sandbox: Allow fake eth to handle more than 1 packet response Joe Hershberger
[U-Boot] net: Add an accessor to know if waiting for ARP Joe Hershberger
[U-Boot] net: sandbox: Add a priv ptr for tests to use Joe Hershberger
[U-Boot] test: eth: Add a test for ARP requests Joe Hershberger
[U-Boot] test: eth: Add a test for the target being pinged Joe Hershberger
[U-Boot] net: Don't overwrite waiting packets with asynchronous replies Joe Hershberger
[U-Boot] net: Consolidate UDP header functions Joe Hershberger
[U-Boot] [PATCH v3 01/13] net: ftgmac100: use the BIT() macro Joe Hershberger
[U-Boot] [PATCH v3 02/13] net: ftgmac100: use the aligned() macro Joe Hershberger
[U-Boot] [PATCH v3 02/13] net: ftgmac100: use the aligned() macro Joe Hershberger
[U-Boot] [PATCH v3 01/13] net: ftgmac100: use the BIT() macro Joe Hershberger
[U-Boot] [PATCH v3 02/13] net: ftgmac100: use the aligned() macro Joe Hershberger
[U-Boot] [PATCH v3 03/13] net: ftgmac100: convert to driver model Joe Hershberger
[U-Boot] [PATCH v3 03/13] net: ftgmac100: convert to driver model Joe Hershberger
[U-Boot] [PATCH v3 03/13] net: ftgmac100: convert to driver model Joe Hershberger
[U-Boot] [PATCH v3 04/13] net: ftgmac100: use setbits_le32() in the reset method Joe Hershberger
[U-Boot] [PATCH v3 04/13] net: ftgmac100: use setbits_le32() in the reset method Joe Hershberger
[U-Boot] [PATCH v3 05/13] net: ftgmac100: add MDIO bus and phylib support Joe Hershberger
[U-Boot] [PATCH v3 05/13] net: ftgmac100: add MDIO bus and phylib support Joe Hershberger
[U-Boot] [PATCH v3 06/13] net: ftgmac100: convert the RX/TX descriptor arrays Joe Hershberger
[U-Boot] [PATCH v3 07/13] net: ftgmac100: handle timeouts when transmitting Joe Hershberger
[U-Boot] [PATCH v3 07/13] net: ftgmac100: handle timeouts when transmitting Joe Hershberger
[U-Boot] [PATCH v3 08/13] net: ftgmac100: add clock support Joe Hershberger
[U-Boot] [PATCH v3 08/13] net: ftgmac100: add clock support Joe Hershberger
[U-Boot] [PATCH v3 09/13] aspeed: ast2500: fix missing break in D2PLL clock enablement Joe Hershberger
[U-Boot] [PATCH v3 06/13] net: ftgmac100: convert the RX/TX descriptor arrays Joe Hershberger
[U-Boot] [PATCH v3 09/13] aspeed: ast2500: fix missing break in D2PLL clock enablement Joe Hershberger
[U-Boot] [PATCH v3 10/13] net: ftgmac100: Add support for the Aspeed SoC Joe Hershberger
[U-Boot] [PATCH v3 10/13] net: ftgmac100: Add support for the Aspeed SoC Joe Hershberger
[U-Boot] [PATCH v3 12/13] aspeed: Activate ethernet devices on the ast2500 Eval Board Joe Hershberger
[U-Boot] [PATCH v3 13/13] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Joe Hershberger
[U-Boot] [PATCH v3 13/13] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Joe Hershberger
[U-Boot] [PATCH v3 09/13] aspeed: ast2500: fix missing break in D2PLL clock enablement Joe Hershberger
[U-Boot] [PATCH v2] net: Add MT76xx ethernet driver Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: clone host Ethernet address Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 26/27] virtio: net: Support non-legacy device Joe Hershberger
[U-Boot] [PATCH 26/27] virtio: net: Support non-legacy device Joe Hershberger
[U-Boot] [PATCH 2/2] net: mvpp2: increase PHY reset pulse Joe Hershberger
[U-Boot] [PATCH 2/2] net: mvpp2: increase PHY reset pulse Joe Hershberger
[U-Boot] [PATCH 1/2] net: mvpp2: fix polarity of PHY reset signal Joe Hershberger
[U-Boot] [PATCH 1/2] net: mvpp2: fix polarity of PHY reset signal Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Joe Hershberger
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Joe Hershberger
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Joe Hershberger
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Joe Hershberger
[U-Boot] driver: net: fsl-mc: modify the label name Joe Hershberger
[U-Boot] driver: net: fsl-mc: remove unused strcture elements Joe Hershberger
[U-Boot] driver: net: fsl-mc: fix error handing in init_phy Joe Hershberger
[U-Boot] driver: net: fsl-mc: Modify the dpmac link detection method Joe Hershberger
[U-Boot] driver: net: fsl-mc: initialize dpmac irrespective of phy Joe Hershberger
[U-Boot] driver: net: fsl-mc: Add support of multiple phys for dpmac Joe Hershberger
[U-Boot] [PATCH v2] net: Add MT76xx ethernet driver Joe Hershberger
[U-Boot] [PATCH v2] net: Add MT76xx ethernet driver Joe Hershberger
[U-Boot] [PATCH v4 07/13] net: ftgmac100: handle timeouts when transmitting Joe Hershberger
[U-Boot] [PATCH v4 07/13] net: ftgmac100: handle timeouts when transmitting Joe Hershberger
[U-Boot] [PATCH v4 11/13] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Joe Hershberger
[U-Boot] [PATCH v4 11/13] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Joe Hershberger
[U-Boot] [PATCH v4 11/13] aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level Joe Hershberger
[U-Boot] [PATCH v4 03/13] net: ftgmac100: convert to driver model Joe Hershberger
[U-Boot] [PATCH v2] net: phy: add TSE PCS support to dwmac-socfpga Joe Hershberger
[U-Boot] [PATCH v2] net: phy: add TSE PCS support to dwmac-socfpga Joe Hershberger
[U-Boot] [PATCH] cmd: mii: don't check address for 'device' subcommand Joe Hershberger
[U-Boot] [PATCH] miiphy: Add function to retrieve MDIO bus list head Joe Hershberger
[U-Boot] [PATCH] miiphy: Add function to retrieve MDIO bus list head Joe Hershberger
[U-Boot] [PATCH 3/4] net: dm: fec: Support the phy-supply binding Joe Hershberger
[U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration Joe Hershberger
[U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration Joe Hershberger
[U-Boot] [PATCH 2/4] net: dm: fec: Fix phy-reset-duration clamping and defaults Joe Hershberger
[U-Boot] [PATCH 2/4] net: dm: fec: Fix phy-reset-duration clamping and defaults Joe Hershberger
[U-Boot] [PATCH 4/4] net: dm: fec: Obtain the transceiver type from the DT Joe Hershberger
[U-Boot] [PATCH 4/4] net: dm: fec: Obtain the transceiver type from the DT Joe Hershberger
[U-Boot] [PATCH] net: fec_mxc: fix phy-reset-gpios logic Joe Hershberger
[U-Boot] [PATCH] net: fec_mxc: fix phy-reset-gpios logic Joe Hershberger
[U-Boot] [PATCH] net: fec_mxc: add support for i.MX8X Joe Hershberger
[U-Boot] [PATCH] net: fec_mxc: add support for i.MX8X Joe Hershberger
[U-Boot] [PATCH 1/3] net: phy: mscc: add support for VSC8584 PHY Joe Hershberger
[U-Boot] [PATCH 1/3] net: phy: mscc: add support for VSC8584 PHY Joe Hershberger
[U-Boot] [PATCH 2/3] net: phy: mscc: factorize part of config function for VSC8584 Joe Hershberger
[U-Boot] [PATCH 2/3] net: phy: mscc: factorize part of config function for VSC8584 Joe Hershberger
[U-Boot] [PATCH 3/3] net: phy: mscc: add support for VSC8574 PHY Joe Hershberger
[U-Boot] [PATCH] net: fec_mxc: add support for i.MX8X Joe Hershberger
[U-Boot] [PATCH] net: fec_mxc: add support for i.MX8X Joe Hershberger
[U-Boot] [PATCH 1/3] configs: migrate CONFIG_PHY_AQUANTIA to Kconfig Joe Hershberger
[U-Boot] [PATCH 2/3] net: phy: aquantia: add firmware loading support Joe Hershberger
[U-Boot] [PATCH 2/3] net: phy: aquantia: add firmware loading support Joe Hershberger
[U-Boot] [PATCH 3/3] net: phy: aquantia: autodetect if firmware needs to be loaded Joe Hershberger
[U-Boot] [PATCH 3/3] net: phy: aquantia: autodetect if firmware needs to be loaded Joe Hershberger
[U-Boot] [PATCH 05/27] virtio: Add net driver support Joe Hershberger
[U-Boot] [PATCH 05/27] virtio: Add net driver support Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] cmd: mii: don't check address for 'device' subcommand Joe Hershberger
[U-Boot] miiphy: Add function to retrieve MDIO bus list head Joe Hershberger
[U-Boot] configs: migrate CONFIG_PHY_AQUANTIA to Kconfig Joe Hershberger
[U-Boot] net: phy: aquantia: add firmware loading support Joe Hershberger
[U-Boot] net: phy: aquantia: autodetect if firmware needs to be loaded Joe Hershberger
[U-Boot] net: dm: fec: Fix time unit error in phy-reset-duration Joe Hershberger
[U-Boot] net: dm: fec: Fix phy-reset-duration clamping and defaults Joe Hershberger
[U-Boot] net: dm: fec: Support the phy-supply binding Joe Hershberger
[U-Boot] net: dm: fec: Obtain the transceiver type from the DT Joe Hershberger
[U-Boot] net/phy: Add phy-id for IN112525_S03 Joe Hershberger
[U-Boot] net: mvpp2: fix polarity of PHY reset signal Joe Hershberger
[U-Boot] net: mvpp2: increase PHY reset pulse Joe Hershberger
[U-Boot] net: fec_mxc: add support for i.MX8X Joe Hershberger
[U-Boot] [PATCH v5] net: Add MT7628 ethernet driver Joe Hershberger
[U-Boot] [PATCH v2] net: e1000: support 'write_hwaddr' in DM Joe Hershberger
[U-Boot] [PATCH v2] net: e1000: support 'write_hwaddr' in DM Joe Hershberger
[U-Boot] [PATCH v6] net: Add MT7628 ethernet driver Joe Hershberger
[U-Boot] [PATCH v5 07/13] net: ftgmac100: handle timeouts when transmitting Joe Hershberger
[U-Boot] [PATCH v4 07/13] net: ftgmac100: handle timeouts when transmitting Joe Hershberger
[U-Boot] [PATCH 1/7] driver: net: consolidate ti's code in separate folder Joe Hershberger
[U-Boot] [PATCH 2/7] configs: net: convert DRIVER_TI_KEYSTONE_NET kconfig Joe Hershberger
[U-Boot] [PATCH 3/7] drivers: net: keystone_net: drop non dm code Joe Hershberger
[U-Boot] [PATCH 4/7] driver: net: ti: cpsw: update to use SPDX identifier Joe Hershberger
[U-Boot] [PATCH 5/7] driver: net: ti: introduce common mdio support library Joe Hershberger
[U-Boot] [PATCH 5/7] driver: net: ti: introduce common mdio support library Joe Hershberger
[U-Boot] [PATCH 6/7] driver: net: ti: cpsw: switch to use common mdio lib Joe Hershberger
[U-Boot] [PATCH 7/7] driver: net: ti: keystone_net: switch to use common mdio lib Joe Hershberger
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Joe Hershberger
[U-Boot] [PATCH v2 5/7] driver: net: ti: introduce common mdio support library Joe Hershberger
[U-Boot] [PATCH v2 3/3] net: phy: mscc: add support for VSC8574 PHY Joe Hershberger
[U-Boot] [PATCH v2 1/3] net: phy: mscc: add support for VSC8584 PHY Joe Hershberger
[U-Boot] [PATCH v3 5/7] driver: net: ti: introduce common mdio support library Joe Hershberger
[U-Boot] [PATCH] net: e1000: support 'write_hwaddr' in DM Joseph Hershberger
[U-Boot] [RFC PATCH v2 0/3] python tools to inspect configs Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v2 1/3] tools: moveconfig: Add an option to build a fuller database of options Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v2 2/3] tools: Add a tool to get a list of defconfigs based on filters Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v2 3/3] tools: Add a tool to get an overview of the usage of CONFIG options Jean-Jacques Hiblot
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v1 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v1 02/19] dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip Jean-Jacques Hiblot
[U-Boot] [PATCH v1 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL Jean-Jacques Hiblot
[U-Boot] [PATCH v1 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS Jean-Jacques Hiblot
[U-Boot] [PATCH v1 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset Jean-Jacques Hiblot
[U-Boot] [PATCH v1 06/19] i2c: omap24xx_i2c: Use platdata to probe the device Jean-Jacques Hiblot
[U-Boot] [PATCH v1 07/19] am335x: Register the I2C controllers if DM_I2C is used. Jean-Jacques Hiblot
[U-Boot] [PATCH v1 08/19] dts: am43x: omap5: Add node for I2C in SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v1 09/19] omap: detect the board after DM is available Jean-Jacques Hiblot
[U-Boot] [PATCH v1 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C Jean-Jacques Hiblot
[U-Boot] [PATCH v1 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v1 12/19] configs: am335x_pdu001: Explicitly enable CONFIG_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v1 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v1 14/19] am57xx: remove non-DM I2C code Jean-Jacques Hiblot
[U-Boot] [PATCH v1 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation Jean-Jacques Hiblot
[U-Boot] [PATCH v1 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently Jean-Jacques Hiblot
[U-Boot] [PATCH v1 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig Jean-Jacques Hiblot
[U-Boot] [PATCH v1 18/19] drivers: core: nullify gd->dm_root after dm_uninit() Jean-Jacques Hiblot
[U-Boot] [PATCH v1 19/19] dra7: Allow selecting a new dtb after board detection. Jean-Jacques Hiblot
[U-Boot] [PATCH v1 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL Jean-Jacques Hiblot
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v1 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL Jean-Jacques Hiblot
[U-Boot] [PATCH v1 12/19] configs: am335x_pdu001: Explicitly enable CONFIG_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v2 00/19] DM_I2C_COMPAT removal for all ti platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v2 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v2 02/19] dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip Jean-Jacques Hiblot
[U-Boot] [PATCH v2 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL Jean-Jacques Hiblot
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v2 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS Jean-Jacques Hiblot
[U-Boot] [PATCH v2 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset Jean-Jacques Hiblot
[U-Boot] [PATCH v2 06/19] i2c: omap24xx_i2c: Use platdata to probe the device Jean-Jacques Hiblot
[U-Boot] [PATCH v2 07/19] am335x: Register the I2C controllers if DM_I2C is used. Jean-Jacques Hiblot
[U-Boot] [PATCH v2 08/19] dts: am43x: omap5: Add node for I2C in SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v2 09/19] omap: detect the board after DM is available Jean-Jacques Hiblot
[U-Boot] [PATCH v2 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C Jean-Jacques Hiblot
[U-Boot] [PATCH v2 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v2 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v2 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v2 14/19] am57xx: remove non-DM I2C code Jean-Jacques Hiblot
[U-Boot] [PATCH v2 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation Jean-Jacques Hiblot
[U-Boot] [PATCH v2 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently Jean-Jacques Hiblot
[U-Boot] [PATCH v2 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig Jean-Jacques Hiblot
[U-Boot] [PATCH v2 18/19] drivers: core: nullify gd->dm_root after dm_uninit() Jean-Jacques Hiblot
[U-Boot] [PATCH v2 19/19] dra7: Allow selecting a new dtb after board detection. Jean-Jacques Hiblot
[U-Boot] [PATCH v2 00/19] DM_I2C_COMPAT removal for all ti platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v2 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v2 02/19] dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip Jean-Jacques Hiblot
[U-Boot] [PATCH v3 10/26] fs: fat: support write with non-zero offset Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v2 3/3] tools: Add a tool to get an overview of the usage of CONFIG options Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v2 2/3] tools: Add a tool to get a list of defconfigs based on filters Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v2 2/3] tools: Add a tool to get a list of defconfigs based on filters Jean-Jacques Hiblot
[U-Boot] [PATCH v2 02/19] dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip Jean-Jacques Hiblot
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Jean-Jacques Hiblot
[U-Boot] [PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms Jean-Jacques Hiblot
[U-Boot] [PATCH v3 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v3 02/19] dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected Jean-Jacques Hiblot
[U-Boot] [PATCH v3 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL Jean-Jacques Hiblot
[U-Boot] [PATCH v3 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS Jean-Jacques Hiblot
[U-Boot] [PATCH v3 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset Jean-Jacques Hiblot
[U-Boot] [PATCH v3 06/19] i2c: omap24xx_i2c: Use platdata to probe the device Jean-Jacques Hiblot
[U-Boot] [PATCH v3 07/19] am335x: Register the I2C controllers if DM_I2C is used. Jean-Jacques Hiblot
[U-Boot] [PATCH v3 08/19] dts: am43x: omap5: Add node for I2C in SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v3 09/19] omap: detect the board after DM is available Jean-Jacques Hiblot
[U-Boot] [PATCH v3 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C Jean-Jacques Hiblot
[U-Boot] [PATCH v3 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v3 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT Jean-Jacques Hiblot
[U-Boot] [PATCH v3 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v3 14/19] am57xx: remove non-DM I2C code Jean-Jacques Hiblot
[U-Boot] [PATCH v3 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation Jean-Jacques Hiblot
[U-Boot] [PATCH v3 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently Jean-Jacques Hiblot
[U-Boot] [PATCH v3 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig Jean-Jacques Hiblot
[U-Boot] [PATCH v3 18/19] drivers: core: nullify gd->dm_root after dm_uninit() Jean-Jacques Hiblot
[U-Boot] [PATCH v3 19/19] dra7: Allow selecting a new dtb after board detection. Jean-Jacques Hiblot
[U-Boot] Compile error with CONFIG_MULTI_DTB_FIT and not SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Jean-Jacques Hiblot
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Jean-Jacques Hiblot
[U-Boot] [PATCH v2 1/1] common: Compile error with CONFIG_MULTI_DTB_FIT and not SPL Jean-Jacques Hiblot
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v3 0/3] python tools to inspect configs Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v3 1/3] tools: moveconfig: Add an option to build a fuller database of options Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v3 2/3] tools: Add a tool to get a list of defconfigs based on filters Jean-Jacques Hiblot
[U-Boot] [RFC PATCH v3 3/3] tools: Add a tool to get an overview of the usage of CONFIG options Jean-Jacques Hiblot
[U-Boot] [PATCH 1/2] dm/pci: Change the first CFG read to Vendor ID in enumeration Z.q. Hou
[U-Boot] [PATCH 2/2] pci: Change the first CFG read to Vendor ID in enumeration Z.q. Hou
[U-Boot] [PATCH 0/8] pci: Add pcie controller driver for NXP LX SoCs Z.q. Hou
[U-Boot] [PATCH 1/8] armv8: fsl-layerscpae: correct the PCIe controllers' region size Z.q. Hou
[U-Boot] [PATCH 2/8] armv8: lx2160a: add MMU table entries for PCIe Z.q. Hou
[U-Boot] [PATCH 3/8] pci: Add pcie controller driver for NXP LX SoCs Z.q. Hou
[U-Boot] [PATCH 4/8] kconfig: add dependency PCIE_LX for FSL_PCIE_COMPAT Z.q. Hou
[U-Boot] [PATCH 5/8] pci: pcie_lx: add device tree fixups for PCI Stream IDs Z.q. Hou
[U-Boot] [PATCH 6/8] armv8: lx2160a: add pcie DT nodes Z.q. Hou
[U-Boot] [PATCH 7/8] armv8: lx2160a: enable pcie support on RDB defconfig Z.q. Hou
[U-Boot] [PATCH 8/8] armv8: lx2160a: enable the pci command Z.q. Hou
[U-Boot] [PATCH 1/2] dm/pci: Change the first CFG read to Vendor ID in enumeration Zhiqiang Hou
[U-Boot] [PATCH 2/2] pci: Change the first CFG read to Vendor ID in enumeration Zhiqiang Hou
[U-Boot] [PATCH v2 9/9] pinctrl: sandbox: Add get_pin_muxing ops support Eugen Hristev
[U-Boot] [PATCH] MAINTAINERS: at91: update entry for sama5 boards and 9x5ek Eugen Hristev
[U-Boot] [PATCH v2] MAINTAINERS: at91: update entry for at91 boards Eugen Hristev
[U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos Eugen Hristev
[U-Boot] [PATCH] board: at91sam9x5: add environment var for cpu type Eugen Hristev
[U-Boot] [PATCH] configs: at91: sam9x5: added FIT and iminfo support Eugen Hristev
[U-Boot] [PATCH] configs: at91: sama5: enable CMD_IMI Eugen Hristev
[U-Boot] [PATCH] configs: sama5d27_som1_ek: enable w1 and overlay for mmc1 defconfig Eugen Hristev
[U-Boot] [PATCH] configs: sama5d2_xplained: enable w1 and overlay for emmc defconfig Eugen Hristev
[U-Boot] [PATCH 1/2] configs: sama5d2_ptc_ek: add default bootargs for NAND defconfig Eugen Hristev
[U-Boot] [PATCH 2/2] configs: sama5d2_ptc_ek: add default bootargs for MMC defconfig Eugen Hristev
[U-Boot] FW: [PATCH 18/30] riscv: invalidate the instruction cache before jumping to Linux Greentime Hu
[U-Boot] [PATCH] net/phy: Add phy-id for IN112525_S03 Priyanka Jain
[U-Boot] [PATCH] board/freescale/vid: Add correction for ltc3882 read error. Priyanka Jain
[U-Boot] [PATCH] board/freescale/vid: Add vdd table for NXP LX2160A SoC Priyanka Jain
[U-Boot] [PATCH] net/phy: Add phy-id for IN112525_S03 Priyanka Jain
[U-Boot] [PATCH][v2] armv8: lx2160a: Add LX2160A SoC Support Priyanka Jain
[U-Boot] [PATCH] armv8: lx2160ardb : Add support for LX2160ARDB platform Priyanka Jain
[U-Boot] [PATCH][v2] armv8:fsl-layerscape: Add support for Chassis 3.2 Priyanka Jain
[U-Boot] [PATCH][v3] armv8: lx2160a: Add LX2160A SoC Support Priyanka Jain
[U-Boot] [PATCH][v2] armv8: lx2160ardb : Add support for LX2160ARDB platform Priyanka Jain
[U-Boot] [PATCH][v2] armv8: lx2160ardb : Add support for LX2160ARDB platform Priyanka Jain
[U-Boot] [PATCH] drivers/ddr/fsl: Update fsl_ddr_board_options as weak function Priyanka Jain
[U-Boot] [U-Boot, BUG] snow: mmc: SD card access broken: unable to select a mode Paweł Jarosz
[U-Boot] [PATCH 0/7] Exynos4412 SPL support Minkyu Kang
[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Minkyu Kang
[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Minkyu Kang
[U-Boot] [PATCH v2] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Minkyu Kang
[U-Boot] please pull u-boot-samsung master Minkyu Kang
[U-Boot] [PATCH 1/2] gpio: da8xx: Add k2g compatible Keerthy
[U-Boot] [PATCH 2/2] gpio: da8xx: Push generic defines of gpio.h out of mach-davinci Keerthy
[U-Boot] [PATCH 2/2] gpio: da8xx: Push generic defines of gpio.h out of mach-davinci Keerthy
[U-Boot] [PATCH v2 1/2] gpio: da8xx: Add k2g compatible Keerthy
[U-Boot] [PATCH v2 2/2] gpio: da8xx: Push generic defines of gpio.h out of mach-davinci Keerthy
[U-Boot] [PATCH] cmd: remoteproc: Fix the base of strtoul for ID conversion from 3 to 10 Keerthy
[U-Boot] [PATCH 1/3] pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypass Vasily Khoruzhick
[U-Boot] [PATCH 2/3] pwm: sunxi: use new prescaler when configuring PWM Vasily Khoruzhick
[U-Boot] [PATCH 3/3] pwm: sunxi: choose best prescaler to improve PWM resolution Vasily Khoruzhick
[U-Boot] [PATCH v2 0/5] Add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH v2 1/5] mmc: sunxi: A64: add support for automatic delay calibration Vasily Khoruzhick
[U-Boot] [PATCH v2 2/5] dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing Vasily Khoruzhick
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Vasily Khoruzhick
[U-Boot] [PATCH v2 4/5] sun50i: A64: add support for R_I2C controller Vasily Khoruzhick
[U-Boot] [PATCH v2 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Vasily Khoruzhick
[U-Boot] [PATCH v2 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH v2 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Vasily Khoruzhick
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Vasily Khoruzhick
[U-Boot] [PATCH v2 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH v3 0/5] Add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH v3 1/5] mmc: sunxi: add support for automatic delay calibration Vasily Khoruzhick
[U-Boot] [PATCH v3 2/5] dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing Vasily Khoruzhick
[U-Boot] [PATCH v3 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Vasily Khoruzhick
[U-Boot] [PATCH v3 4/5] sun50i: A64: add support for R_I2C controller Vasily Khoruzhick
[U-Boot] [PATCH v3 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH 3/3] pwm: sunxi: choose best prescaler to improve PWM resolution Vasily Khoruzhick
[U-Boot] [PATCH 3/3] pwm: sunxi: choose best prescaler to improve PWM resolution Vasily Khoruzhick
[U-Boot] [PATCH v4 0/5] Add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH v4 1/5] mmc: sunxi: add support for automatic delay calibration Vasily Khoruzhick
[U-Boot] [PATCH v4 2/5] dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing Vasily Khoruzhick
[U-Boot] [PATCH v4 3/5] sunxi: DT: A64: update device tree files for Allwinner A64 SoC Vasily Khoruzhick
[U-Boot] [PATCH v4 4/5] sun50i: A64: add support for R_I2C controller Vasily Khoruzhick
[U-Boot] [PATCH v4 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
[U-Boot] [PATCH] sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD Vasily Khoruzhick
[U-Boot] am33xx board with no external RTC crystal issue Alex Kiernan
[U-Boot] [PATCH 1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high Paul Kocialkowski
[U-Boot] [PATCH 2/4] sunxi: display: Add support for panels with an active-low DE signal Paul Kocialkowski
[U-Boot] [PATCH 3/4] sunxi: display: Also use the PWM controller for backlight on sun7i Paul Kocialkowski
[U-Boot] [PATCH 4/4] sunxi: Add defconfig for the BananaPi with BL035 LCD module Paul Kocialkowski
[U-Boot] [PATCH] driver/mtd: Add MICRON manufacturer id in spi framework Ashish Kumar
[U-Boot] [PATCH] ls1088a: Move CONFIG_FSL_QSPI to defconfig Ashish Kumar
[U-Boot] [PATCH] ls1012afrwy:update ls1012afrwy env board variable Pramod Kumar
[U-Boot] [PATCH] armv8: ls1012afrwy: update of env board variables Pramod Kumar
[U-Boot] [PATCH] armv8: ls1088ardb_pb: Add support for board detection Pramod Kumar
[U-Boot] [PATCH 2/3] net: phy: aquantia: add firmware loading support Prabhakar Kushwaha
[U-Boot] [PATCH 0/5] sunxi: doc: Add fastboot example + misc cleanups Priit Laes
[U-Boot] [PATCH 1/5] sunxi: Fix typos of spelling Allwinner Priit Laes
[U-Boot] [PATCH 2/5] sunxi: docs: Unify the formatting style and add some paragraph breaks Priit Laes
[U-Boot] [PATCH 3/5] sunxi: docs: Mention CONFIG_NAND requirement Priit Laes
[U-Boot] [PATCH 4/5] sunxi: display: Mark sunxi_rgb2yuv_coef array as const Priit Laes
[U-Boot] [PATCH 5/5] sunxi: doc: Add basic fastboot example Priit Laes
[U-Boot] [PATCH 5/5] sunxi: doc: Add basic fastboot example Priit Laes
[U-Boot] [linux-sunxi] Re: [PATCH 5/5] sunxi: doc: Add basic fastboot example Priit Laes
[U-Boot] [PATCH 1/1] arm: spl: Fix SPL falcon mode boot on MMC with ext partition Fabien Lahoudere
[U-Boot] [PATCH 1/1] board: ge: bx50v3: Change maintainer Fabien Lahoudere
[U-Boot] [PATCH 0/2] board: ge: bx50v3: Fix screen flickering Fabien Lahoudere
[U-Boot] [PATCH 1/2] board: ge: bx50v3: correct LDB clock Fabien Lahoudere
[U-Boot] [PATCH 2/2] board: ge: bx50v3: b{4,6}50v3 modeline Fabien Lahoudere
[U-Boot] [PATCH 1/1] board: ge: bx50v3: fix initialization of i2c bus0 Fabien Lahoudere
[U-Boot] [PATCH V3 0/6] board: ge: Move bootcount to EEPROM Fabien Lahoudere
[U-Boot] [PATCH V3 1/6] board: ge: Remove EEPROM bus param from read_vpd() Fabien Lahoudere
[U-Boot] [PATCH V3 2/6] board: ge: Move VPD EEPROM configuration to the defconfig Fabien Lahoudere
[U-Boot] [PATCH V3 3/6] bootcount: i2c: Add bus switching to the I2C bootcount driver Fabien Lahoudere
[U-Boot] [PATCH V3 4/6] bootcount: Configure length limit for I2C bootcount Fabien Lahoudere
[U-Boot] [PATCH V3 5/6] board: ge: Move VPD reading to the vpd_reader Fabien Lahoudere
[U-Boot] [PATCH V3 6/6] board: ge: Store bootcount in EEPROM on PPD and Bx50v3 Fabien Lahoudere
[U-Boot] [PATCH 00/20] Add support for MediaTek SoCs - MT7623n / MT7629 Ryder Lee
[U-Boot] [PATCH 01/20] tools: MediaTek: add MTK boot header generation to mkimage Ryder Lee
[U-Boot] [PATCH 02/20] arm: MediaTek: add basic support for MT7629 boards Ryder Lee
[U-Boot] [PATCH 03/20] arm: MediaTek: add basic support for MT7623 boards Ryder Lee
[U-Boot] [PATCH 04/20] arm: dts: MediaTek: add MT7629 reference board support Ryder Lee
[U-Boot] [PATCH 05/20] arm: dts: MediaTek: add MT7623 Bananapi R2 board support Ryder Lee
[U-Boot] [PATCH 06/20] configs: MediaTek: add MT7629 reference board support Ryder Lee
[U-Boot] [PATCH 07/20] configs: MediaTek: add MT7623 Bananapi R2 board support Ryder Lee
[U-Boot] [PATCH 08/20] clk: MediaTek: add clock driver for MT7629 SoC. Ryder Lee
[U-Boot] [PATCH 09/20] clk: MediaTek: add clock driver for MT7623 SoC. Ryder Lee
[U-Boot] [PATCH 10/20] timer: MediaTek: add timer driver for MediaTek SoCs Ryder Lee
[U-Boot] [PATCH 11/20] watchdog: MediaTek: add watchdog driver for MediaTek SoCs Ryder Lee
[U-Boot] [PATCH 12/20] pinctrl: MediaTek: add pinctrl driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH 13/20] pinctrl: MediaTek: add pinctrl driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH 14/20] power domain: MediaTek: add power domain driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH 15/20] power domain: MediaTek: add power domain driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH 16/20] serial: 16550: allow the driver to support MediaTek serial Ryder Lee
[U-Boot] [PATCH 17/20] ram: MediaTek: add DDR3 driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH 18/20] spi: mtk_qspi: add qspi driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH 19/20] mmc: mtk-sd: add SD/MMC host controller driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH 20/20] MAINTAINERS: add an entry for MediaTek Ryder Lee
[U-Boot] [PATCH 04/20] arm: dts: MediaTek: add MT7629 reference board support Ryder Lee
[U-Boot] [PATCH 05/20] arm: dts: MediaTek: add MT7623 Bananapi R2 board support Ryder Lee
[U-Boot] [PATCH 03/20] arm: MediaTek: add basic support for MT7623 boards Ryder Lee
[U-Boot] [PATCH v1 00/19] AddU-Boot support for MediaTek SoCs - MT7623n & MT7629 Ryder Lee
[U-Boot] [PATCH v1 01/19] tools: MediaTek: add MTK boot header generation to mkimage Ryder Lee
[U-Boot] [PATCH v1 02/19] arm: dts: MediaTek: add device tree for MT7629 Ryder Lee
[U-Boot] [PATCH v1 03/19] arm: dts: MediaTek: add device tree for MT7623 Ryder Lee
[U-Boot] [PATCH v1 04/19] arm: MediaTek: add basic support for MT7629 boards Ryder Lee
[U-Boot] [PATCH v1 05/19] arm: MediaTek: add basic support for MT7623 boards Ryder Lee
[U-Boot] [PATCH v1 06/19] configs: MediaTek: add MT7629 reference board support Ryder Lee
[U-Boot] [PATCH v1 07/19] configs: MediaTek: add MT7623 Bananapi R2 board support Ryder Lee
[U-Boot] [PATCH v1 08/19] clk: MediaTek: add clock driver for MT7629 SoC. Ryder Lee
[U-Boot] [PATCH v1 09/19] clk: MediaTek: add clock driver for MT7623 SoC. Ryder Lee
[U-Boot] [PATCH v1 10/19] timer: MediaTek: add timer driver for MediaTek SoCs Ryder Lee
[U-Boot] [PATCH v1 11/19] watchdog: MediaTek: add watchdog driver for MediaTek SoCs Ryder Lee
[U-Boot] [PATCH v1 12/19] pinctrl: MediaTek: add pinctrl driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v1 13/19] pinctrl: MediaTek: add pinctrl driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH v1 14/19] power domain: MediaTek: add power domain driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v1 15/19] power domain: MediaTek: add power domain driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH v1 16/19] serial: 16550: allow the driver to support MediaTek serial Ryder Lee
[U-Boot] [PATCH v1 17/19] ram: MediaTek: add DDR3 driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v1 18/19] mmc: mtk-sd: add SD/MMC host controller driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH v1 19/19] MAINTAINERS: add an entry for MediaTek Ryder Lee
[U-Boot] [PATCH v2 00/18] Add U-Boot support for MediaTek SoCs - MT7623n & MT7629 Ryder Lee
[U-Boot] [PATCH v2 01/18] tools: MediaTek: add MTK boot header generation to mkimage Ryder Lee
[U-Boot] [PATCH v2 02/18] arm: dts: MediaTek: add device tree for MT7629 Ryder Lee
[U-Boot] [PATCH v2 03/18] arm: dts: MediaTek: add device tree for MT7623 Ryder Lee
[U-Boot] [PATCH v2 04/18] arm: MediaTek: add basic support for MT7629 boards Ryder Lee
[U-Boot] [PATCH v2 05/18] arm: MediaTek: add basic support for MT7623 boards Ryder Lee
[U-Boot] [PATCH v2 06/18] clk: MediaTek: add clock driver for MT7629 SoC. Ryder Lee
[U-Boot] [PATCH v2 07/18] clk: MediaTek: add clock driver for MT7623 SoC. Ryder Lee
[U-Boot] [PATCH v2 08/18] timer: MediaTek: add timer driver for MediaTek SoCs Ryder Lee
[U-Boot] [PATCH v2 09/18] watchdog: MediaTek: add watchdog driver for MediaTek SoCs Ryder Lee
[U-Boot] [PATCH v2 10/18] pinctrl: MediaTek: add pinctrl driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v2 11/18] pinctrl: MediaTek: add pinctrl driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH v2 12/18] power domain: MediaTek: add power domain driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v2 13/18] power domain: MediaTek: add power domain driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH v2 14/18] serial: 16550: allow the driver to support MediaTek serial Ryder Lee
[U-Boot] [PATCH v2 15/18] ram: MediaTek: add DDR3 driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v2 16/18] mmc: mtk-sd: add SD/MMC host controller driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH v2 17/18] spi: mtk_qspi: add qspi driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v2 18/18] MAINTAINERS: add an entry for MediaTek Ryder Lee
[U-Boot] [PATCH v1 04/19] arm: MediaTek: add basic support for MT7629 boards Ryder Lee
[U-Boot] [PATCH v1 06/19] configs: MediaTek: add MT7629 reference board support Ryder Lee
[U-Boot] [PATCH v2 10/18] pinctrl: MediaTek: add pinctrl driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v2 11/18] pinctrl: MediaTek: add pinctrl driver for MT7623 SoC Ryder Lee
[U-Boot] [PATCH v2 06/18] clk: MediaTek: add clock driver for MT7629 SoC. Ryder Lee
[U-Boot] [PATCH v2 05/18] arm: MediaTek: add basic support for MT7623 boards Ryder Lee
[U-Boot] [PATCH v2 04/18] arm: MediaTek: add basic support for MT7629 boards Ryder Lee
[U-Boot] [PATCH v2 15/18] ram: MediaTek: add DDR3 driver for MT7629 SoC Ryder Lee
[U-Boot] [PATCH v2 01/18] tools: MediaTek: add MTK boot header generation to mkimage Ryder Lee
[U-Boot] Fwd: build u-boot failed with config CONFIG_ARMV8_PSCI by aarch linux gcc 8.1 Renlin Li
[U-Boot] [PATCH 0/7] Restructure the i.MX U-Boot documentation Breno Matheus Lima
[U-Boot] [PATCH 1/7] doc: imx: reorganize i.MX documentation Breno Matheus Lima
[U-Boot] [PATCH 2/7] doc: imx: Move SPD related info to the appropriate doc Breno Matheus Lima
[U-Boot] [PATCH 3/7] doc: imx: mkimage: reorganize i.MX mkimage documentation Breno Matheus Lima
[U-Boot] [PATCH 4/7] doc: imx: Reorganize i.MX SoC common documentation Breno Matheus Lima
[U-Boot] [PATCH 5/7] doc: imx: hab: Reorganize High Assurance Boot documentation Breno Matheus Lima
[U-Boot] [PATCH 6/7] doc: imx: misc: Reorganize miscellaneous documentation Breno Matheus Lima
[U-Boot] [PATCH 7/7] doc: imx: Improve i.MX documentation naming Breno Matheus Lima
[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols Leif Lindholm
[U-Boot] [linux-sunxi] [PATCH 5/5] sunxi: doc: Add basic fastboot example Jonathan Liu
[U-Boot] [PATCH 1/4] scsi: ceva: add ls1046a soc support Peng Ma
[U-Boot] [PATCH 2/4] armv8: dts: fsl-ls1046a: add sata node support Peng Ma
[U-Boot] [PATCH 3/4] arm64: ls1046ardb: enable DM support for sata Peng Ma
[U-Boot] [PATCH 4/4] arm64: ls1046aqds: enable DM support for sata Peng Ma
[U-Boot] [PATCH 1/3] scsi: ceva: add ls1088a soc support Peng Ma
[U-Boot] [PATCH 2/3] armv8: dts: fsl-ls1088a: add sata node support Peng Ma
[U-Boot] [PATCH 3/3] arm64: ls1088a: enable DM support for sata Peng Ma
[U-Boot] [PATCH 1/3] scsi: ceva: add ls2080a soc support Peng Ma
[U-Boot] [PATCH 2/3] armv8: dts: fsl-ls2080a: add sata node support Peng Ma
[U-Boot] [PATCH 3/3] arm64: ls2080a: enable DM support for sata Peng Ma
[U-Boot] [PATCH v2 10/14] usb:ci_udc: Introduce init_after_reset phy function Lukasz Majewski
[U-Boot] [PATCH v2 14/14] usb:ci_udc: don't overwrite configuration on pullup Lukasz Majewski
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Lukasz Majewski
[U-Boot] [PATCH 00/22] spl: Add features for passing info from SPL to U-Boot proper Lukasz Majewski
[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Lukasz Majewski
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Lukasz Majewski
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM Lukasz Majewski
[U-Boot] [PATCH] Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig Lukasz Majewski
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Lukasz Majewski
[U-Boot] [PATCH 18/20] spi: mtk_qspi: add qspi driver for MT7629 SoC Guochun Mao
[U-Boot] [PATCH 18/20] spi: mtk_qspi: add qspi driver for MT7629 SoC Guochun Mao
[U-Boot] am33xx board with no external RTC crystal issue Belisko Marek
[U-Boot] [PATCH v3 00/17] riscv: Add QEMU virt board support Bin Meng
[U-Boot] [PATCH 5/6] test: Add PCI device entry without compat string and with DT node Bin Meng
[U-Boot] [PATCH 1/4] Enable CONFIG_TIMER_EARLY with bootstage Bin Meng
[U-Boot] [PATCH 40/45] pci: Add a little more debugging to pci_rom Bin Meng
[U-Boot] [PATCH 33/45] x86: Update mtrr functions to allow leaving cache alone Bin Meng
[U-Boot] [PATCH 4/5] arm: efi: Generate Microsoft PE format complaint images Bin Meng
[U-Boot] [PATCH 1/5] efi_loader: Generate Microsoft PE format complaint images Bin Meng
[U-Boot] [PATCH v2 1/6] efi_loader: Generate Microsoft PE format compliant images Bin Meng
[U-Boot] [PATCH v2 2/6] x86: efi: payload: Generate Microsoft PE format compliant image Bin Meng
[U-Boot] [PATCH v2 3/6] x86: efi: app: Generate Microsoft PE format compliant image Bin Meng
[U-Boot] [PATCH v2 4/6] pe.h: Add characteristics defines Bin Meng
[U-Boot] [PATCH v2 5/6] arm: efi: Generate Microsoft PE format compliant images Bin Meng
[U-Boot] [PATCH v2 6/6] riscv: efi: Generate Microsoft PE format compliant images Bin Meng
[U-Boot] [PATCH 03/27] virtio: Add codes for virtual queue/ring management Bin Meng
[U-Boot] [PATCH 18/27] riscv: qemu: Include some useful commands Bin Meng
[U-Boot] [PATCH 05/27] virtio: Add net driver support Bin Meng
[U-Boot] [PATCH v2 6/6] riscv: efi: Generate Microsoft PE format compliant images Bin Meng
[U-Boot] [PATCH v3 00/17] riscv: Add QEMU virt board support Bin Meng
[U-Boot] [PATCH 00/27] virtio: Introduce VirtIO driver support Bin Meng
[U-Boot] [PATCH v3 00/17] riscv: Add QEMU virt board support Bin Meng
[U-Boot] [PATCH v2 01/23] log: Correct definition of log_msg_ret() Bin Meng
[U-Boot] 4 failures with 'ut dm' Bin Meng
[U-Boot] [PATCH 0/8] dm: Various fixes in dm core/cpu/timer Bin Meng
[U-Boot] [PATCH 1/8] dm: cpu: Fix print_cpuinfo() output Bin Meng
[U-Boot] [PATCH 2/8] cpu: mpc83xx: Remove unnecessary characters in the description string Bin Meng
[U-Boot] [PATCH 3/8] dm: util: Add a livetree equivalent API of dm_fdt_pre_reloc() Bin Meng
[U-Boot] [PATCH 4/8] dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt() Bin Meng
[U-Boot] [PATCH 5/8] dm: Correct pre_reloc_only parameter description in several APIs' comments Bin Meng
[U-Boot] [PATCH 6/8] dm: core: Mirror the chosen node parse logic in the livetree scanning Bin Meng
[U-Boot] [PATCH 7/8] test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flag Bin Meng
[U-Boot] [PATCH 8/8] timer: Sort Kconfig driver entries Bin Meng
[U-Boot] 4 failures with 'ut dm' Bin Meng
[U-Boot] [PATCH 1/4] Enable CONFIG_TIMER_EARLY with bootstage Bin Meng
[U-Boot] [PATCH v2 0/8] dm: Various fixes in dm core/cpu/timer Bin Meng
[U-Boot] [PATCH v2 1/8] dm: cpu: Fix print_cpuinfo() output Bin Meng
[U-Boot] [PATCH v2 2/8] cpu: mpc83xx: Remove unnecessary characters in the description string Bin Meng
[U-Boot] [PATCH v2 3/8] dm: util: Add a livetree equivalent API of dm_fdt_pre_reloc() Bin Meng
[U-Boot] [PATCH v2 4/8] dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt() Bin Meng
[U-Boot] [PATCH v2 5/8] dm: Correct pre_reloc_only parameter description in several APIs' comments Bin Meng
[U-Boot] [PATCH v2 6/8] dm: core: Mirror the chosen node parse logic in the livetree scanning Bin Meng
[U-Boot] [PATCH v2 7/8] test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flag Bin Meng
[U-Boot] [PATCH v2 8/8] timer: Sort Kconfig driver entries Bin Meng
[U-Boot] [PATCH 5/6] test: Add PCI device entry without compat string and with DT node Bin Meng
[U-Boot] [PATCH] linux/compat.h: Add netdev_### log macros Bin Meng
[U-Boot] [PATCH 5/6] test: Add PCI device entry without compat string and with DT node Bin Meng
[U-Boot] [PATCH] riscv: dts: Sync to Linux Kernel ae350 dts. Bin Meng
[U-Boot] [PATCH 1/2] dm/pci: Change the first CFG read to Vendor ID in enumeration Bin Meng
[U-Boot] [PATCH 2/2] pci: Change the first CFG read to Vendor ID in enumeration Bin Meng
[U-Boot] [PATCH] nand: atmel: Initialize pmecc smu with correct size Bin Meng
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value Bin Meng
[U-Boot] [PATCH 2/2] powerpc: t1040: Correct RCW EC2 settings Bin Meng
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Bin Meng
[U-Boot] [PATCH 2/2] riscv: dts: Add ae350_32.dts for 32 bit Bin Meng
[U-Boot] [PATCH 1/2] riscv: configs: Separate ax25-ae350 for 32/64 bit. Bin Meng
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Bin Meng
[U-Boot] [PATCH 1/2] travis: Remove or32 toolchain info Bin Meng
[U-Boot] [PATCH 2/2] travis: Switch to i386 version toolchain for x86 Bin Meng
[U-Boot] [PATCH 2/2] travis: Switch to i386 version toolchain for x86 Bin Meng
[U-Boot] [PATCH 2/2] pci: Change the first CFG read to Vendor ID in enumeration Bin Meng
[U-Boot] bootefi selftest on qemu-x86_64 Bin Meng
[U-Boot] bootefi selftest on qemu-x86_64 Bin Meng
[U-Boot] bootefi selftest on qemu-x86_64 Bin Meng
[U-Boot] [PATCH 00/27] virtio: Introduce VirtIO driver support Bin Meng
[U-Boot] [PATCH 1/4] x86: Specify -march=core2 to build 64-bit U-Boot proper Bin Meng
[U-Boot] [PATCH 2/4] x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build Bin Meng
[U-Boot] [PATCH 3/4] x86: doc: Mention qemu-x86_64 support Bin Meng
[U-Boot] [PATCH 4/4] WIP: travis: Add qemu-x86_64 target for test.py testing Bin Meng
[U-Boot] [PATCH 4/4] WIP: travis: Add qemu-x86_64 target for test.py testing Bin Meng
[U-Boot] [PATCH v2 3/8] dm: util: Add a livetree equivalent API of dm_fdt_pre_reloc() Bin Meng
[U-Boot] [PATCH 1/4] pci: Support parsing PCI controller DT subnodes Bin Meng
[U-Boot] [PATCH 2/4] pci: Update documentation to make 'compatible' string optional Bin Meng
[U-Boot] [PATCH 3/4] test: Add PCI device entry without compat string and with DT node Bin Meng
[U-Boot] [PATCH 4/4] test: Add test for PCI device without compat string and with DT node Bin Meng
[U-Boot] [PATCH v3 0/8] dm: Various fixes in dm core/cpu/timer Bin Meng
[U-Boot] [PATCH v3 1/8] dm: cpu: Fix print_cpuinfo() output Bin Meng
[U-Boot] [PATCH v3 2/8] cpu: mpc83xx: Remove unnecessary characters in the description string Bin Meng
[U-Boot] [PATCH v3 3/8] dm: util: Add a livetree equivalent API of dm_fdt_pre_reloc() Bin Meng
[U-Boot] [PATCH v3 4/8] dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt() Bin Meng
[U-Boot] [PATCH v3 5/8] dm: Correct pre_reloc_only parameter description in several APIs' comments Bin Meng
[U-Boot] [PATCH v3 6/8] dm: core: Mirror the chosen node parse logic in the livetree scanning Bin Meng
[U-Boot] [PATCH v3 7/8] test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flag Bin Meng
[U-Boot] [PATCH v3 8/8] timer: Sort Kconfig driver entries Bin Meng
[U-Boot] [PATCH 01/27] dm: core: Allow uclass to set up a device's child after it is probed Bin Meng
[U-Boot] [PATCH] x86/bootm: fix error handling in boot_prep_linux(...) Bin Meng
[U-Boot] [PATCH] x86/bootm: fix compressed image boot Bin Meng
[U-Boot] [PATCH v3 3/9] dm: uclass: Add uclass_foreach_dev_probe Bin Meng
[U-Boot] [PATCH 02/27] dm: Add a new uclass driver for VirtIO transport devices Bin Meng
[U-Boot] [PATCH 02/27] dm: Add a new uclass driver for VirtIO transport devices Bin Meng
[U-Boot] [PATCH 03/27] virtio: Add codes for virtual queue/ring management Bin Meng
[U-Boot] [PATCH 16/27] arm: qemu: Enumerate virtio bus during early boot Bin Meng
[U-Boot] [PATCH 16/27] arm: qemu: Enumerate virtio bus during early boot Bin Meng
[U-Boot] [PATCH 20/27] x86: Implement arch-specific io accessor routines Bin Meng
[U-Boot] [PATCH 21/27] virtio: Add virtio over pci transport driver Bin Meng
[U-Boot] [PATCH 25/27] virtio: pci: Support non-legacy PCI transport device Bin Meng
[U-Boot] [PATCH] linux/compat.h: Add netdev_### log macros Bin Meng
[U-Boot] [PATCH 3/4] x86: doc: Mention qemu-x86_64 support Bin Meng
[U-Boot] [PATCH 3/4] x86: doc: Mention qemu-x86_64 support Bin Meng
[U-Boot] [PATCH 4/4] WIP: travis: Add qemu-x86_64 target for test.py testing Bin Meng
[U-Boot] [PATCH 2/4] x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build Bin Meng
[U-Boot] [PATCH v3 3/9] dm: uclass: Add uclass_foreach_dev_probe Bin Meng
[U-Boot] [PATCH v4 12/17] board_f: Use static print_cpuinfo if CONFIG_CPU is active Bin Meng
[U-Boot] [U-Boot,11/45] rtc: Allow use of RTC in SPL and TPL Bin Meng
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Bin Meng
[U-Boot] [PATCH 1/1] x86: put global data pointer into the .text section Bin Meng
[U-Boot] [PATCH 1/1] x86: put global data pointer into the .text section Bin Meng
[U-Boot] [PATCH 1/1] x86: put global data pointer into the .text section Bin Meng
[U-Boot] [PATCH 1/1] efi_loader: fix relocation on x86_64 Bin Meng
[U-Boot] [PATCH v2 1/1] x86: put global data pointer into the .data section Bin Meng
[U-Boot] [PATCH 00/12] x86: Attempt to bring qemu-x86_64 target in travis-ci build/testing Bin Meng
[U-Boot] [PATCH 01/12] x86: Specify -march=core2 to build 64-bit U-Boot proper Bin Meng
[U-Boot] [PATCH 02/12] x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build Bin Meng
[U-Boot] [PATCH 03/12] x86: doc: Mention qemu-x86_64 support Bin Meng
[U-Boot] [PATCH 04/12] x86: doc: Remove stale sections of 64-bit support Bin Meng
[U-Boot] [PATCH 05/12] x86: qemu: enable CONFIG_SPL_DM_RTC Bin Meng
[U-Boot] [PATCH 06/12] x86: detect unsupported relocation types Bin Meng
[U-Boot] [PATCH 07/12] x86: put global data pointer into the .data section Bin Meng
[U-Boot] [PATCH 08/12] efi_loader: fix relocation on x86_64 Bin Meng
[U-Boot] [PATCH 09/12] x86: Fix the mystery of printch() during 64-bit boot Bin Meng
[U-Boot] [PATCH 10/12] x86: tsc: Introduce config option for early timer frequency Bin Meng
[U-Boot] [PATCH 11/12] x86: quark: Specify X86_TSC_TIMER_EARLY_FREQ Bin Meng
[U-Boot] [PATCH 12/12] WIP: travis: Add qemu-x86_64 target for test.py testing Bin Meng
[U-Boot] [PATCH 12/12] WIP: travis: Add qemu-x86_64 target for test.py testing Bin Meng
[U-Boot] [PATCH 10/12] x86: tsc: Introduce config option for early timer frequency Bin Meng
[U-Boot] [PATCH 12/12] WIP: travis: Add qemu-x86_64 target for test.py testing Bin Meng
[U-Boot] [PATCH v2 00/14] x86: Bring qemu-x86_64 target in travis-ci build/testing Bin Meng
[U-Boot] [PATCH v2 01/14] x86: Specify -march=core2 to build 64-bit U-Boot proper Bin Meng
[U-Boot] [PATCH v2 02/14] x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build Bin Meng
[U-Boot] [PATCH v2 03/14] x86: doc: Mention qemu-x86_64 support Bin Meng
[U-Boot] [PATCH v2 04/14] x86: doc: Remove stale sections of 64-bit support Bin Meng
[U-Boot] [PATCH v2 05/14] x86: qemu: enable CONFIG_SPL_DM_RTC Bin Meng
[U-Boot] [PATCH v2 06/14] x86: detect unsupported relocation types Bin Meng
[U-Boot] [PATCH v2 07/14] x86: put global data pointer into the .data section Bin Meng
[U-Boot] [PATCH v2 08/14] efi_loader: fix relocation on x86_64 Bin Meng
[U-Boot] [PATCH v2 09/14] x86: Fix the mystery of printch() during 64-bit boot Bin Meng
[U-Boot] [PATCH v2 10/14] x86: tsc: Introduce config option for early timer frequency Bin Meng
[U-Boot] [PATCH v2 11/14] x86: quark: Specify X86_TSC_TIMER_EARLY_FREQ Bin Meng
[U-Boot] [PATCH v2 12/14] travis: Generate grub_x64.efi for qemu-x86_64 Bin Meng
[U-Boot] [PATCH v2 13/14] travis: Update to use QEMU 3.0.0 for testing Bin Meng
[U-Boot] [PATCH v2 14/14] travis: Add qemu-x86_64 target for test.py testing Bin Meng
[U-Boot] [PATCH 1/2] cpu: Add DM_FLAG_PRE_RELOC flag to various cpu drivers Bin Meng
[U-Boot] [PATCH 2/2] sandbox: Enable CONFIG_DISPLAY_CPUINFO Bin Meng
[U-Boot] [PATCH 2/2] sandbox: Enable CONFIG_DISPLAY_CPUINFO Bin Meng
[U-Boot] [PATCH v2 1/2] cpu: Add DM_FLAG_PRE_RELOC flag to various cpu drivers Bin Meng
[U-Boot] [PATCH v2 2/2] cpu: sandbox: Add "u-boot, dm-pre-reloc" for all cpu nodes Bin Meng
[U-Boot] [PATCH v2 00/31] virtio: Introduce VirtIO driver support Bin Meng
[U-Boot] [PATCH v2 01/31] dm: core: Allow uclass to set up a device's child after it is probed Bin Meng
[U-Boot] [PATCH v2 02/31] test: dm: core: Add test case for uclass driver's child_post_probe() Bin Meng
[U-Boot] [PATCH v2 03/31] riscv: bootm: Add dm_remove_devices_flags() call to do_bootm_linux() Bin Meng
[U-Boot] [PATCH v2 04/31] dm: Add a new uclass driver for VirtIO transport devices Bin Meng
[U-Boot] [PATCH v2 05/31] virtio: Add codes for virtual queue/ring management Bin Meng
[U-Boot] [PATCH v2 06/31] virtio: Add virtio over mmio transport driver Bin Meng
[U-Boot] [PATCH v2 07/31] virtio: Add net driver support Bin Meng
[U-Boot] [PATCH v2 08/31] test: dm: blk: Correct blk_base test case Bin Meng
[U-Boot] [PATCH v2 09/31] sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data Bin Meng
[U-Boot] [PATCH v2 10/31] efi_driver: blk: Switch to use platdata_auto_alloc_size for the driver data Bin Meng
[U-Boot] [PATCH v2 11/31] blk: Call part_init() in the post_probe() method Bin Meng
[U-Boot] [PATCH v2 12/31] blk: Drop blk_prepare_device() Bin Meng
[U-Boot] [PATCH v2 13/31] blk: Make blk_next_free_devnum() public Bin Meng
[U-Boot] [PATCH v2 14/31] blk: Introduce IF_TYPE_VIRTIO Bin Meng
[U-Boot] [PATCH v2 15/31] virtio: Add block driver support Bin Meng
[U-Boot] [PATCH v2 16/31] virtio: cmd: Add virtio command for virtio devices Bin Meng
[U-Boot] [PATCH v2 17/31] riscv: qemu: Enumerate virtio bus during early boot Bin Meng
[U-Boot] [PATCH v2 18/31] riscv: qemu: Include some useful commands Bin Meng
[U-Boot] [PATCH v2 19/31] kconfig: Introduce HAVE_ARCH_IOMAP Bin Meng
[U-Boot] [PATCH v2 20/31] x86: Implement arch-specific io accessor routines Bin Meng
[U-Boot] [PATCH v2 21/31] virtio: Add virtio over pci transport driver Bin Meng
[U-Boot] [PATCH v2 22/31] arm: qemu: Add a Kconfig in the board directory Bin Meng
[U-Boot] [PATCH v2 23/31] arm: qemu: Enumerate virtio bus during early boot Bin Meng
[U-Boot] [PATCH v2 24/31] x86: qemu: Imply virtio PCI transport and device drivers Bin Meng
[U-Boot] [PATCH v2 25/31] dm: pci: Add APIs to find next capability and extended capability Bin Meng
[U-Boot] [PATCH v2 26/31] test: dm: pci: Add cases for finding next PCI capability APIs Bin Meng
[U-Boot] [PATCH v2 27/31] virtio: pci: Support non-legacy PCI transport device Bin Meng
[U-Boot] [PATCH v2 28/31] virtio: net: Support non-legacy device Bin Meng
[U-Boot] [PATCH v2 29/31] virtio: Add a Sandbox transport driver Bin Meng
[U-Boot] [PATCH v2 30/31] test: dm: virtio: Add test cases for virtio uclass Bin Meng
[U-Boot] [PATCH v2 31/31] doc: Document virtio support Bin Meng
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value Bin Meng
[U-Boot] [PATCH v3 00/31] virtio: Introduce VirtIO driver support Bin Meng
[U-Boot] [PATCH v3 01/31] dm: core: Allow uclass to set up a device's child after it is probed Bin Meng
[U-Boot] [PATCH v3 02/31] test: dm: core: Add test case for uclass driver's child_post_probe() Bin Meng
[U-Boot] [PATCH v3 03/31] riscv: bootm: Add dm_remove_devices_flags() call to do_bootm_linux() Bin Meng
[U-Boot] [PATCH v3 04/31] dm: Add a new uclass driver for VirtIO transport devices Bin Meng
[U-Boot] [PATCH v3 05/31] virtio: Add codes for virtual queue/ring management Bin Meng
[U-Boot] [PATCH v3 06/31] virtio: Add virtio over mmio transport driver Bin Meng
[U-Boot] [PATCH v3 07/31] virtio: Add net driver support Bin Meng
[U-Boot] [PATCH v3 08/31] test: dm: blk: Correct blk_base test case Bin Meng
[U-Boot] [PATCH v3 09/31] sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data Bin Meng
[U-Boot] [PATCH v3 10/31] efi_driver: blk: Switch to use platdata_auto_alloc_size for the driver data Bin Meng
[U-Boot] [PATCH v3 11/31] blk: Call part_init() in the post_probe() method Bin Meng
[U-Boot] [PATCH v3 12/31] blk: Drop blk_prepare_device() Bin Meng
[U-Boot] [PATCH v3 13/31] blk: Make blk_next_free_devnum() public Bin Meng
[U-Boot] [PATCH v3 14/31] blk: Introduce IF_TYPE_VIRTIO Bin Meng
[U-Boot] [PATCH v3 15/31] virtio: Add block driver support Bin Meng
[U-Boot] [PATCH v3 16/31] virtio: cmd: Add virtio command for virtio devices Bin Meng
[U-Boot] [PATCH v3 17/31] riscv: qemu: Enumerate virtio bus during early boot Bin Meng
[U-Boot] [PATCH v3 18/31] riscv: qemu: Include some useful commands Bin Meng
[U-Boot] [PATCH v3 19/31] kconfig: Introduce HAVE_ARCH_IOMAP Bin Meng
[U-Boot] [PATCH v3 20/31] x86: Implement arch-specific io accessor routines Bin Meng
[U-Boot] [PATCH v3 21/31] virtio: Add virtio over pci transport driver Bin Meng
[U-Boot] [PATCH v3 22/31] arm: qemu: Add a Kconfig in the board directory Bin Meng
[U-Boot] [PATCH v3 23/31] arm: qemu: Enumerate virtio bus during early boot Bin Meng
[U-Boot] [PATCH v3 24/31] x86: qemu: Imply virtio PCI transport and device drivers Bin Meng
[U-Boot] [PATCH v3 25/31] dm: pci: Add APIs to find next capability and extended capability Bin Meng
[U-Boot] [PATCH v3 26/31] test: dm: pci: Add cases for finding next PCI capability APIs Bin Meng
[U-Boot] [PATCH v3 27/31] virtio: pci: Support non-legacy PCI transport device Bin Meng
[U-Boot] [PATCH v3 28/31] virtio: net: Support non-legacy device Bin Meng
[U-Boot] [PATCH v3 29/31] virtio: Add a Sandbox transport driver Bin Meng
[U-Boot] [PATCH v3 30/31] test: dm: virtio: Add test cases for virtio uclass Bin Meng
[U-Boot] [PATCH v3 31/31] doc: Document virtio support Bin Meng
[U-Boot] [PATCH] drivers: serial: probe all serial devices Bin Meng
[U-Boot] Please pull u-boot-dm Bin Meng
[U-Boot] [PATCH] riscv: dts: Sync to Linux Kernel ae350 dts. Bin Meng
[U-Boot] [PATCH v2 1/6] efi_loader: Generate Microsoft PE format compliant images Bin Meng
[U-Boot] [PATCH v2 1/6] efi_loader: Generate Microsoft PE format compliant images Bin Meng
[U-Boot] Please pull u-boot-dm Bin Meng
[U-Boot] [U-Boot, v2, 08/14] efi_loader: fix relocation on x86_64 Bin Meng
[U-Boot] Please pull u-boot-dm Bin Meng
[U-Boot] Please pull u-boot-dm Bin Meng
[U-Boot] [U-Boot,11/45] rtc: Allow use of RTC in SPL and TPL Bin Meng
[U-Boot] [PATCH] arm: qemu: rework Kconfig Bin Meng
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value Bin Meng
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value Bin Meng
[U-Boot] [PATCH] arm: qemu: rework Kconfig Bin Meng
[U-Boot] [PATCH 02/30] riscv: ignore device tree binaries Bin Meng
[U-Boot] [PATCH 01/30] tools: .gitignore: add prelink-riscv Bin Meng
[U-Boot] [PATCH 03/30] dts: riscv: update makefile to also clean the RISC-V dts directory Bin Meng
[U-Boot] [PATCH 04/30] riscv: rename CPU_RISCV_32/64 to match architecture names ARCH_RV32I/64I Bin Meng
[U-Boot] [PATCH 05/30] riscv: select CONFIG_PHYS_64BIT on RV64I systems Bin Meng
[U-Boot] [PATCH 06/30] riscv: add Kconfig entries for the C and A ISA extensions Bin Meng
[U-Boot] [PATCH 07/30] riscv: set -march and -mabi based on the Kconfig configuration Bin Meng
[U-Boot] [PATCH 08/30] riscv: add Kconfig entries for the code model Bin Meng
[U-Boot] [PATCH 09/30] riscv: move target selection into separate file Bin Meng
[U-Boot] [PATCH 10/30] riscv: enable -fdata-sections Bin Meng
[U-Boot] [PATCH 11/30] riscv: fix use of incorrectly sized variables Bin Meng
[U-Boot] [PATCH 12/30] riscv: make use of the barrier functions from Linux Bin Meng
[U-Boot] [PATCH 13/30] riscv: do not reimplement generic io functions Bin Meng
[U-Boot] [PATCH 14/30] riscv: complete the list of exception codes Bin Meng
[U-Boot] [PATCH 15/30] riscv: treat undefined exception codes as reserved Bin Meng
[U-Boot] [PATCH 16/30] riscv: hang on unhandled exceptions Bin Meng
[U-Boot] [PATCH 17/30] riscv: implement the invalidate_icache_* functions Bin Meng
[U-Boot] [PATCH 19/30] riscv: fix inconsistent use of spaces and tabs in start.S Bin Meng
[U-Boot] [PATCH 20/30] riscv: align mtvec on a 4-byte boundary Bin Meng
[U-Boot] [PATCH 21/30] riscv: remove CONFIG_INIT_CRITICAL Bin Meng
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Bin Meng
[U-Boot] [PATCH 23/30] riscv: do not blindly modify the mstatus CSR Bin Meng
[U-Boot] [PATCH 24/30] riscv: save hart ID and device tree passed by prior boot stage Bin Meng
[U-Boot] [PATCH 25/30] riscv: qemu: use device tree passed by prior boot stage Bin Meng
[U-Boot] [PATCH 26/30] bdinfo: riscv: print fdt_blob address Bin Meng
[U-Boot] [PATCH 27/30] riscv: qemu: support booting Linux Bin Meng
[U-Boot] [PATCH 28/30] riscv: align bootm implementation with that of other architectures Bin Meng
[U-Boot] [PATCH 29/30] dm: core: add missing prototype for ofnode_read_u64 Bin Meng
[U-Boot] [PATCH 30/30] riscv: qemu: detect and boot the kernel passed by QEMU Bin Meng
[U-Boot] [PATCH 00/30] General fixes / cleanup for RISC-V and improvements to qemu-riscv Bin Meng
[U-Boot] Please pull u-boot-dm Bin Meng
[U-Boot] [PATCH] x86/bootm: fix error handling in boot_prep_linux(...) Bin Meng
[U-Boot] [PATCH v2 00/14] x86: Bring qemu-x86_64 target in travis-ci build/testing Bin Meng
[U-Boot] [PATCH] nand: atmel: Initialize pmecc smu with correct size Bin Meng
[U-Boot] Please pull u-boot-x86 Bin Meng
[U-Boot] Please pull u-boot-x86 Bin Meng
[U-Boot] [PATCH] x86: make X86IRQ per Kconfig switchable Bin Meng
[U-Boot] [PATCH 1/4] x86: BayTrail: southcluster.asl: Change PCI 64 bit address range / region Bin Meng
[U-Boot] [PATCH 2/4] x86: theadorable-x86-common: Change pci hotplug cmdline parameters (again) Bin Meng
[U-Boot] [PATCH 3/4] x86: theadorable-x86: Generate and pass root=PARTUUID instead of /dev/sdaX Bin Meng
[U-Boot] [PATCH 4/4] x86: theadorable-x86-xxx_defconfig: Move VGA BIOS to make room for U-Boot Bin Meng
[U-Boot] [PATCH 20/30] riscv: align mtvec on a 4-byte boundary Bin Meng
[U-Boot] [PATCH 22/30] riscv: remove unused labels in start.S Bin Meng
[U-Boot] [PATCH 00/13] dm: DM_FLAG_PRE_RELOC flag clean up Bin Meng
[U-Boot] [PATCH 01/13] arm: stm32mp: Remove DM_FLAG_PRE_RELOC flag Bin Meng
[U-Boot] [PATCH 02/13] clk: Remove DM_FLAG_PRE_RELOC flag in various drivers Bin Meng
[U-Boot] [PATCH 03/13] gpio: Remove DM_FLAG_PRE_RELOC flag in various drivers Bin Meng
[U-Boot] [PATCH 04/13] i2c: omap24xx: Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check Bin Meng
[U-Boot] [PATCH 05/13] mmc: omap: Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check Bin Meng
[U-Boot] [PATCH 06/13] pinctrl: Remove DM_FLAG_PRE_RELOC flag in various drivers Bin Meng
[U-Boot] [PATCH 07/13] ram: bmips: Remove DM_FLAG_PRE_RELOC flag Bin Meng
[U-Boot] [PATCH 08/13] timer: Remove DM_FLAG_PRE_RELOC flag in various drivers Bin Meng
[U-Boot] [PATCH 09/13] serial: Remove DM_FLAG_PRE_RELOC flag in various drivers Bin Meng
[U-Boot] [PATCH 10/13] sysreset: Remove DM_FLAG_PRE_RELOC flag in various drivers Bin Meng
[U-Boot] [PATCH 11/13] video: simplefb: Remove DM_FLAG_PRE_RELOC flag Bin Meng
[U-Boot] [PATCH 12/13] watchdog: Remove DM_FLAG_PRE_RELOC flag in various drivers Bin Meng
[U-Boot] [PATCH 13/13] dm: doc: Update description of pre-relocation support Bin Meng
[U-Boot] Please pull u-boot-dm Bin Meng
[U-Boot] Please pull u-boot-dm Bin Meng
[U-Boot] [PATCH 06/30] riscv: add Kconfig entries for the C and A ISA extensions Bin Meng
[U-Boot] [PATCH 07/30] riscv: set -march and -mabi based on the Kconfig configuration Bin Meng
[U-Boot] [PATCH 06/30] riscv: add Kconfig entries for the C and A ISA extensions Bin Meng
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Bin Meng
[U-Boot] [PATCH 09/30] riscv: move target selection into separate file Bin Meng
[U-Boot] [PATCH 21/30] riscv: remove CONFIG_INIT_CRITICAL Bin Meng
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Bin Meng
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Bin Meng
[U-Boot] [PATCH 2/2] riscv: dts: Add ae350_32.dts for 32 bit Bin Meng
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Bin Meng
[U-Boot] [PATCH] x86: Fix car_uninit weak symbol definition Bin Meng
[U-Boot] [PATCH 1/4] x86: BayTrail: southcluster.asl: Change PCI 64 bit address range / region Bin Meng
[U-Boot] [PATCH 2/4] x86: theadorable-x86-common: Change pci hotplug cmdline parameters (again) Bin Meng
[U-Boot] [PATCH 3/4] x86: theadorable-x86: Generate and pass root=PARTUUID instead of /dev/sdaX Bin Meng
[U-Boot] [PATCH 4/4] x86: theadorable-x86-xxx_defconfig: Move VGA BIOS to make room for U-Boot Bin Meng
[U-Boot] [PATCH 09/30] riscv: move target selection into separate file Bin Meng
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Bin Meng
[U-Boot] [PATCH] drivers: serial: probe all serial devices Bin Meng
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Bin Meng
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Bin Meng
[U-Boot] [PATCH 00/30] General fixes / cleanup for RISC-V and improvements to qemu-riscv Bin Meng
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value Bin Meng
[U-Boot] [PATCH] x86: Fix car_uninit weak symbol definition Bin Meng
[U-Boot] Please pull u-boot-x86 Bin Meng
[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register Bin Meng
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Bin Meng
[U-Boot] [PATCH v2] net: e1000: support 'write_hwaddr' in DM Bin Meng
[U-Boot] [PATCH v2 05/29] riscv: add Kconfig entries for the C and A ISA extensions Bin Meng
[U-Boot] [PATCH v2 06/29] riscv: set -march and -mabi based on the Kconfig configuration Bin Meng
[U-Boot] [PATCH v2 07/29] riscv: add Kconfig entries for the code model Bin Meng
[U-Boot] [PATCH v2 09/29] riscv: fix use of incorrectly sized variables Bin Meng
[U-Boot] [PATCH v2 16/29] riscv: invalidate the instruction cache before jumping to Linux Bin Meng
[U-Boot] [PATCH v2 20/29] riscv: remove unused labels in start.S Bin Meng
[U-Boot] [PATCH v2 27/29] dm: core: add missing prototype for ofnode_read_u64 Bin Meng
[U-Boot] [PATCH v2 29/29] riscv: qemu: clear kernel-start/-end in device tree as workaround for BBL Bin Meng
[U-Boot] [PATCH 1/2] spi: ich-spi: Add APL support Bernhard Messerklinger
[U-Boot] [PATCH 2/2] spi: ich-spi: Add DT spi-max-frequency support Bernhard Messerklinger
[U-Boot] [PATCH] x86: tsc: Add support for APL soc Bernhard Messerklinger
[U-Boot] Antwort: Re: [PATCH] spi: mxc_spi: Fix chipselect with DM_SPI in SPL Bernhard Messerklinger
[U-Boot] [PATCH] arm: udoo: Convert to distro config Meul, Dirk
[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Meul, Dirk
[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Dirk Meul
[U-Boot] [PATCH v2] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Dirk Meul
[U-Boot] [PATCH] power: regulator: denied disable on always-on regulator Jack Mitchell
[U-Boot] [PATCH] power: regulator: denied disable on always-on regulator Jack Mitchell
[U-Boot] [PATCH] power: regulator: denied disable on always-on regulator Jack Mitchell
[U-Boot] [PATCH 0/7] Exynos4412 SPL support Anand Moon
[U-Boot] [PATCH 1/2] AQUANTIA USXGMII autoneg enable Valentin-catalin Neacsu
[U-Boot] [PATCH 2/2] Aquantia: Print information about system interface and firmaware version Valentin-catalin Neacsu
[U-Boot] [PATCH 1/2] AQUANTIA USXGMII autoneg enable Valentin-catalin Neacsu
[U-Boot] [PATCH 2/2] Aquantia: Print information about system interface and firmaware version Valentin-catalin Neacsu
[U-Boot] u-boot without network boot Alexandru Onea
[U-Boot] [PATCH v2] net: phy: add TSE PCS support to dwmac-socfpga Ooi, Joyce
[U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A005275 Chris Packham
[U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A005275 Chris Packham
[U-Boot] [PATCH v2] fsl/usb: Workaround for USB erratum-A005275 Chris Packham
[U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A005275 Chris Packham
[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K Chris Packham
[U-Boot] latest kwboot Chris Packham
[U-Boot] latest kwboot Chris Packham
[U-Boot] "Kbuild:43: recipe for target 'lib/asm-offsets.s' failed" Chris Packham
[U-Boot] u-boot support for iMote2 Santi Pagola
[U-Boot] spl: fix the new position of gd and stack Donglin Peng
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Thomas Petazzoni
[U-Boot] [PATCH] fs: btrfs: Fix tree traversal with btrfs_next_slot() Yevgeny Popovych
[U-Boot] [PATCH] fs: btrfs: Fix tree traversal with btrfs_next_slot() Yevgeny Popovych
[U-Boot] Compile error with CONFIG_MULTI_DTB_FIT and not SPL Lars Povlsen
[U-Boot] [PATCH v2 1/1] common: Compile error with CONFIG_MULTI_DTB_FIT and not SPL Lars Povlsen
[U-Boot] [PATCH] Mips: When using CONFIG_OF_SEPARATE, mips-relocs mess up _end symbol Lars Povlsen
[U-Boot] [PATCH] arm: ti: boot: Remove environment partition Sam Protsenko
[U-Boot] [PATCH] arm: ti: boot: Don't read environment partition Sam Protsenko
[U-Boot] [PATCH 1/5] mmc: sunxi: add support for automatic delay calibration Andre Przywara
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Andre Przywara
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Andre Przywara
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Andre Przywara
[U-Boot] [PATCH v3 1/5] mmc: sunxi: add support for automatic delay calibration Andre Przywara
[U-Boot] [PATCH v3 2/5] dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing Andre Przywara
[U-Boot] [PATCH 0/4] sunxi: A64/H3/H5 DT updates Andre Przywara
[U-Boot] [PATCH 1/4] sunxi: A64: Update .dts/.dtsi files Andre Przywara
[U-Boot] [PATCH 2/4] sunxi: A64: Re-add syscon to DT node Andre Przywara
[U-Boot] [PATCH 3/4] sunxi: H3/H5: Update .dts files Andre Przywara
[U-Boot] [PATCH 4/4] sunxi: A64: Add Pine64-LTS board Andre Przywara
[U-Boot] [PATCH v4 5/5] sunxi: DT: add support for Pinebook Andre Przywara
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC André Przywara
[U-Boot] [PATCH v2 1/5] mmc: sunxi: A64: add support for automatic delay calibration André Przywara
[U-Boot] [PATCH v2 2/5] dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing André Przywara
[U-Boot] [PATCH v2 4/5] sun50i: A64: add support for R_I2C controller André Przywara
[U-Boot] [PATCH v2 5/5] sunxi: DT: add support for Pinebook André Przywara
[U-Boot] [linux-sunxi] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size André Przywara
[U-Boot] [PATCH v2 0/6] sunxi: extend SPL header to propagate DRAM size and H6 3GiB DRAM support André Przywara
[U-Boot] [PATCH v2 4/6] sunxi: map DRAM part with 3G size André Przywara
[U-Boot] [PATCH v2 1/6] sunxi: disable Pine A64 model detection code on other boards André Przywara
[U-Boot] [PATCH v2 5/6] sunxi: add Kconfig option for the maximum accessible DRAM André Przywara
[U-Boot] [PATCH v3 10/26] fs: fat: support write with non-zero offset Clément Péron
[U-Boot] [PATCH 1/3] mtd/spi: Add JEDEC SFDP support in SPI framework Vignesh R
[U-Boot] [PATCH v12 1/8] dm: drop unused helper in MTD header Miquel Raynal
[U-Boot] [PATCH v12 1/8] dm: drop unused helper in MTD header Miquel Raynal
[U-Boot] [PATCH v13 0/7] SPI-NAND support (third batch) Miquel Raynal
[U-Boot] [PATCH v13 1/7] mtd: uclass: add probe function Miquel Raynal
[U-Boot] [PATCH v13 2/7] mtd: mtdpart: add a generic mtdparts-like parser Miquel Raynal
[U-Boot] [PATCH v13 3/7] mtd: uboot: search for an equivalent MTD name with the mtdids Miquel Raynal
[U-Boot] [PATCH v13 4/7] mtd: mtdpart: implement proper partition handling Miquel Raynal
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Miquel Raynal
[U-Boot] [PATCH v13 6/7] cmd: ubi: clean the partition handling Miquel Raynal
[U-Boot] [PATCH v13 7/7] cmd: mtdparts: describe as legacy Miquel Raynal
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Miquel Raynal
[U-Boot] Pull request: u-boot-spi/master Miquel Raynal
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Miquel Raynal
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Miquel Raynal
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Miquel Raynal
[U-Boot] [PATCH] mtd: nand: spi: Add Gigadevice SPI NAND support Miquel Raynal
[U-Boot] [PATCH V3] mtd: uboot: Fix hanging during mtd list command Miquel Raynal
[U-Boot] [PATCH] nand: atmel: Initialize pmecc smu with correct size Miquel Raynal
[U-Boot] [PATCH V3] mtd: uboot: Fix hanging during mtd list command Miquel Raynal
[U-Boot] [PATCH V3] mtd: uboot: Fix hanging during mtd list command Miquel Raynal
[U-Boot] [PATCH] mtd: nand: let the raw NAND devices be compiled upon selection Miquel Raynal
[U-Boot] [PATCH 0/3] Add raw read support and use it in pxa3xx NAND driver Miquel Raynal
[U-Boot] [PATCH 1/3] mtd: nand: pxa3xx: add raw read support Miquel Raynal
[U-Boot] [PATCH 2/3] mtd: nand: pxa3xx: re-read a page in raw mode on uncorrectable error Miquel Raynal
[U-Boot] [PATCH 3/3] mtd: rawnand: pxa3xx: fix 2kiB pages with 8b strength chips layout Miquel Raynal
[U-Boot] [PATCH] nand: fix up badblock skipping Miquel Raynal
[U-Boot] [PATCH] mtd: nand: let the raw NAND devices be compiled upon selection Miquel Raynal
[U-Boot] [PATCH] mtd: nand: lpc32xx mlc: predefine number of NAND chips to support Miquel Raynal
[U-Boot] [PATCH] mtd: nand: lpc32xx slc: disable DMA support in SPL builds Miquel Raynal
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Miquel Raynal
[U-Boot] [PATCH 0/3] mtd: Fix partition handling code Miquel Raynal
[U-Boot] [PATCH] cmd: ubi: Make ubi_detach() static Miquel Raynal
[U-Boot] [PATCH 1/4] rsa: use new openssl API to create signature Philippe Reynes
[U-Boot] [PATCH 2/4] rsa: add a structure for the padding Philippe Reynes
[U-Boot] [PATCH 3/4] rsa: add support of padding pss Philippe Reynes
[U-Boot] [PATCH 4/4] doc: uImage.FIT: signature.txt: add option padding Philippe Reynes
[U-Boot] [PATCH 1/3] serial: bcm6858: add serial support Philippe Reynes
[U-Boot] [PATCH 2/3] bcm6858: add initial support Philippe Reynes
[U-Boot] [PATCH 3/3] bcm968580xref: add initial support Philippe Reynes
[U-Boot] [PATCH V2 1/6] rsa: use new openssl API to create signature Philippe Reynes
[U-Boot] [PATCH V2 2/6] rsa: add a structure for the padding Philippe Reynes
[U-Boot] [PATCH V2 3/6] rsa: add support of padding pss Philippe Reynes
[U-Boot] [PATCH V2 4/6] doc: uImage.FIT: signature.txt: add option padding Philippe Reynes
[U-Boot] [PATCH V2 5/6] configs: sandbox: enable padding pss for rsa signature Philippe Reynes
[U-Boot] [PATCH V2 6/6] test: vboot: add padding pss for rsa signature Philippe Reynes
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] [PATCH] MAINTAINERS: at91: update entry for sama5 boards and 9x5ek Tom Rini
[U-Boot] [U-Boot, v2] Fixes the load command return code under btrfs Tom Rini
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Tom Rini
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Tom Rini
[U-Boot] [PATCH v2] MAINTAINERS: at91: update entry for at91 boards Tom Rini
[U-Boot] [ANN] U-Boot v2018.11-rc1 released Tom Rini
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] [PATCH 1/1] riscv: allow native compilation Tom Rini
[U-Boot] [PATCH] ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1 Tom Rini
[U-Boot] [PATCH 1/2] gpio: da8xx: Add k2g compatible Tom Rini
[U-Boot] [PATCH 2/2] gpio: da8xx: Push generic defines of gpio.h out of mach-davinci Tom Rini
[U-Boot] [PATCH v2 2/2] gpio: da8xx: Push generic defines of gpio.h out of mach-davinci Tom Rini
[U-Boot] [PATCH 1/2] arm: K3: am654: Choose MMC boot device based on boot port Tom Rini
[U-Boot] [PATCH 2/2] arm: K3: am654: Add support for getting boot mode Tom Rini
[U-Boot] Uboot send pull request Tom Rini
[U-Boot] Please pull from u-boot-i2c Tom Rini
[U-Boot] [PULL] u-boot-rockchip patch queue 2018-10-03 Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] Please pull ARC changes Tom Rini
[U-Boot] [PULL] rockchip patch-queue 2018-10-05 Tom Rini
[U-Boot] [PULL] u-boot-socfpga/master Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] ARM: da850evm: Remove DM_I2C_COMPAT Tom Rini
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Tom Rini
[U-Boot] [U-Boot, V2] test/py: ignore console read exceptions after test failure Tom Rini
[U-Boot] [U-Boot, 1/2] test/py: test_fs: remove fs_type argument from umount_fs() Tom Rini
[U-Boot] [U-Boot, 2/2] test/py: test_fs: add docstring comments to helper functions Tom Rini
[U-Boot] configs: drop CONFIG_SYS_EXTRA_ENV_RELOC Tom Rini
[U-Boot] [U-Boot, v3] misc: Add support for the Arm Versatile Express config bus Tom Rini
[U-Boot] [U-Boot, 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Tom Rini
[U-Boot] [U-Boot, 2/5] ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xx Tom Rini
[U-Boot] [U-Boot, 3/5] ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LV Tom Rini
[U-Boot] [U-Boot, 4/5] ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo Tom Rini
[U-Boot] [U-Boot, 5/5] ARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection Tom Rini
[U-Boot] [U-Boot,1/1] fs: fat: memory leak in fat_unlink() Tom Rini
[U-Boot] mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7 Tom Rini
[U-Boot] [U-Boot,1/1] fs: fat: fix set_cluster() Tom Rini
[U-Boot] spl: ram: Fix u_boot_pos calculation Tom Rini
[U-Boot] spl: spi: Do not hardcode fixed size for header Tom Rini
[U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig Tom Rini
[U-Boot] Keystone 2 sram scratch address? Tom Rini
[U-Boot] ARM: da850evm: Remove DM_I2C_COMPAT Tom Rini
[U-Boot] [PATCH] travis: Add sandbox/clang-7 support Tom Rini
[U-Boot] [PATCH] ARM: mach-omap2: Kconfig: Make SYS_MPUCLK dependent on AM33XX Tom Rini
[U-Boot] [U-Boot, v4, 01/19] dm: fdt: scan for devices under /firmware too Tom Rini
[U-Boot] [U-Boot, v4, 02/19] cmd: avb read_rb: print rb_idx in hexadecimal Tom Rini
[U-Boot] [U-Boot, v4, 03/19] cmd: avb: print error message if command fails Tom Rini
[U-Boot] [U-Boot, v4, 04/19] mmc: rpmb: add mmc_rpmb_route_frames() Tom Rini
[U-Boot] [U-Boot, v4, 05/19] Add UCLASS_TEE for Trusted Execution Environment Tom Rini
[U-Boot] [U-Boot,v4,06/19] dt/bindings: add bindings for optee Tom Rini
[U-Boot] [U-Boot,v4,07/19] tee: add OP-TEE driver Tom Rini
[U-Boot] [U-Boot, v4, 08/19] Documentation: tee uclass and op-tee driver Tom Rini
[U-Boot] [U-Boot,v4,09/19] arm: dt: hikey: Add optee node Tom Rini
[U-Boot] [U-Boot, v4, 10/19] optee: support routing of rpmb data frames to mmc Tom Rini
[U-Boot] [U-Boot, v4, 11/19] tee: optee: support AVB trusted application Tom Rini
[U-Boot] [U-Boot,v4,12/19] sandbox: dt: add sandbox_tee node Tom Rini
[U-Boot] [U-Boot, v4, 13/19] sandbox: imply CONFIG_TEE (TEE uclass) Tom Rini
[U-Boot] [U-Boot,v4,14/19] tee: add sandbox driver Tom Rini
[U-Boot] [U-Boot,v4,15/19] test: tee: test TEE uclass Tom Rini
[U-Boot] [U-Boot, v4, 16/19] avb_verify: support using OP-TEE TA AVB Tom Rini
[U-Boot] [U-Boot, v4, 17/19] test_avb: Update pymark.buildconfigspec information for the AVB tests Tom Rini
[U-Boot] [U-Boot, v4, 18/19] avb_verify: support sandbox configuration Tom Rini
[U-Boot] [U-Boot, v4, 19/19] Kconfig: sandbox: enable cmd_avb and dependencies Tom Rini
[U-Boot] Keystone 2 sram scratch address? Tom Rini
[U-Boot] [PATCH] bootm: Add board specific OS preboot hook Tom Rini
[U-Boot] [PATCH] fs: btrfs: Fix tree traversal with btrfs_next_slot() Tom Rini
[U-Boot] [U-Boot, 1/1] docs: kernel-doc: fix parsing of function pointers Tom Rini
[U-Boot] [PATCH 2/2] travis: Switch to i386 version toolchain for x86 Tom Rini
[U-Boot] [PATCH 2/2] travis: Switch to i386 version toolchain for x86 Tom Rini
[U-Boot] [PATCH] travis: Add sandbox/clang-7 support Tom Rini
[U-Boot] [PATCH v1 04/19] arm: MediaTek: add basic support for MT7629 boards Tom Rini
[U-Boot] [PATCH v1 06/19] configs: MediaTek: add MT7629 reference board support Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] rtc: Add read8 and write8 support to isl1208 driver Tom Rini
[U-Boot] fs: btrfs: Fix tree traversal with btrfs_next_slot() Tom Rini
[U-Boot] [U-Boot, v2, 1/1] ARM: meson: Extend mem_map to support 3GiB of RAM Tom Rini
[U-Boot] cmd: pxe: add support for FIT config selection Tom Rini
[U-Boot] tests/test_bind.py: Update test to match the wider 'dm tree' output Tom Rini
[U-Boot] ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1 Tom Rini
[U-Boot] [U-Boot,1/2] ARM: meson: Add Khadas VIM2 board DT Tom Rini
[U-Boot] [U-Boot, 2/2] ARM: meson: Add Khadas VIM2 board support Tom Rini
[U-Boot] [U-Boot, v2, 1/2] fdt: add call to ft_board_setup_ex() for ks2 boards Tom Rini
[U-Boot] [U-Boot, v2, 2/2] board: ks2: move uinitrd fixup logic inside ft_board_setup_ex Tom Rini
[U-Boot] [U-Boot,v2,1/2] gpio: da8xx: Add k2g compatible Tom Rini
[U-Boot] [U-Boot, v2, 2/2] gpio: da8xx: Push generic defines of gpio.h out of mach-davinci Tom Rini
[U-Boot] [U-Boot, 1/2] arm: K3: am654: Choose MMC boot device based on boot port Tom Rini
[U-Boot] [U-Boot, 2/2] arm: K3: am654: Add support for getting boot mode Tom Rini
[U-Boot] bootm: Add board specific OS preboot hook Tom Rini
[U-Boot] [U-Boot, 1/5] arm: remove prototype for arch_interrupt_init Tom Rini
[U-Boot] [U-Boot, 2/5] arm: remove prototype for reset_timer_masked Tom Rini
[U-Boot] [U-Boot,3/5] arm: remove prototype for udelay_masked Tom Rini
[U-Boot] [U-Boot, 4/5] arm: remove prototype for get_timer_masked Tom Rini
[U-Boot] [U-Boot, 5/5] arm: remove duplicated prototypes in u-boot.arm.h Tom Rini
[U-Boot] [PATCH] ldpaa_eth.c: Fix warning when PHYLIB is not enabled Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] [PATCH] ldpaa_eth.c: Fix warning when PHYLIB is not enabled Tom Rini
[U-Boot] [PATCH] ldpaa_eth.c: Fix warning when PHYLIB is not enabled Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] Pull request: u-boot-sunxi/master Tom Rini
[U-Boot] Please pull ARC changes (fixed re-send) Tom Rini
[U-Boot] [GIT PULL] Xilinx changes for v2018.11-rc2 Tom Rini
[U-Boot] [ANN] U-Boot v2018.11-rc2 released Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] Please pull from u-boot-i2c Tom Rini
[U-Boot] [GIT PULL] Xilinx changes for v2018.11-rc2 Tom Rini
[U-Boot] [GIT PULL] Xilinx changes for v2018.11-rc2 v2 Tom Rini
[U-Boot] [PULL 2018.11] efi patch queue 2018-10-17 Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] [PULL] u-boot-socfpga/master Tom Rini
[U-Boot] [PULL] u-boot-sh/master Tom Rini
[U-Boot] [U-Boot, 1/2] arm: lpc32xx: add CONFIG_ARCH_LPC32XX build option Tom Rini
[U-Boot] [U-Boot, 2/2] Makefile: add LPC32xx precondition for building platform images Tom Rini
[U-Boot] [U-Boot, 1/2] work_92105: remove unused CONFIG_LPC32XX_SPL configuration option Tom Rini
[U-Boot] [U-Boot, 2/2] work_92105: remove unused CONFIG_SPL_NAND_BOOT configuration option Tom Rini
[U-Boot] arm: lpc32xx: remove phantom CONFIG_LPC32XX_SDRAM_ config option Tom Rini
[U-Boot] ARM: mach-omap2: Kconfig: Make SYS_MPUCLK dependent on AM33XX Tom Rini
[U-Boot] travis: Add sandbox/clang-7 support Tom Rini
[U-Boot] [U-Boot,1/2] travis: Remove or32 toolchain info Tom Rini
[U-Boot] [U-Boot, 2/2] travis: Switch to i386 version toolchain for x86 Tom Rini
[U-Boot] bootcount: Make bootcount magic configurable Tom Rini
[U-Boot] [U-Boot,1/1] common: command: fix typo Tom Rini
[U-Boot] Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig Tom Rini
[U-Boot] Pull request: u-boot-staging Tom Rini
[U-Boot] [U-Boot, 1/4] pci: Support parsing PCI controller DT subnodes Tom Rini
[U-Boot] [U-Boot, 2/4] pci: Update documentation to make 'compatible' string optional Tom Rini
[U-Boot] [U-Boot, 3/4] test: Add PCI device entry without compat string and with DT node Tom Rini
[U-Boot] [U-Boot, 4/4] test: Add test for PCI device without compat string and with DT node Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] [PATCH 01/10] ram: Introduce K3 AM654 DDR Sub System driver Tom Rini
[U-Boot] [PATCH 02/10] armv7R: K3: am654: Enable MPU regions Tom Rini
[U-Boot] [PATCH 03/10] armv7R: K3: am654: Add support for generating build targets Tom Rini
[U-Boot] [PATCH 04/10] armv7R: K3: am654: Add support to start ATF from R5 SPL Tom Rini
[U-Boot] [PATCH 05/10] armv7R: K3: am654: Add support for triggering ddr init from SPL Tom Rini
[U-Boot] [PATCH 06/10] board: ti: am654: r5: Add initial support for am654 Tom Rini
[U-Boot] [PATCH 07/10] arm: dts: k3: Sync dts from Linux Tom Rini
[U-Boot] [PATCH 08/10] armv7r: dts: am654: Add initial support Tom Rini
[U-Boot] [PATCH 09/10] configs: am65x_evm_r5: Add initial support Tom Rini
[U-Boot] [PATCH 10/10] board: ti: am65x: Update README to add R5 build support Tom Rini
[U-Boot] [PATCH v3 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT Tom Rini
[U-Boot] [PATCH v3 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS Tom Rini
[U-Boot] [PATCH v3 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset Tom Rini
[U-Boot] [PATCH v3 06/19] i2c: omap24xx_i2c: Use platdata to probe the device Tom Rini
[U-Boot] [PATCH v3 07/19] am335x: Register the I2C controllers if DM_I2C is used. Tom Rini
[U-Boot] [PATCH v3 08/19] dts: am43x: omap5: Add node for I2C in SPL Tom Rini
[U-Boot] [PATCH v3 09/19] omap: detect the board after DM is available Tom Rini
[U-Boot] [PATCH v3 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C Tom Rini
[U-Boot] [PATCH v3 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT Tom Rini
[U-Boot] [PATCH v3 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT Tom Rini
[U-Boot] [PATCH v3 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL Tom Rini
[U-Boot] [PATCH v3 14/19] am57xx: remove non-DM I2C code Tom Rini
[U-Boot] [PATCH v3 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation Tom Rini
[U-Boot] [PATCH v3 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig Tom Rini
[U-Boot] [PATCH v3 19/19] dra7: Allow selecting a new dtb after board detection. Tom Rini
[U-Boot] [U-Boot, V2] ARM: da850evm_direct_nor: Remove DM_I2C_COMPAT Tom Rini
[U-Boot] ARM: omap3_logic.c: Optimize DDR timings based on OMAP35 or 36/37 Tom Rini
[U-Boot] ARM: omap3logic: Encapsulate the MUSB functions in check for DM Tom Rini
[U-Boot] ARM: omap3logic: Specify DM serial driver as omap_serial Tom Rini
[U-Boot] ARM: omap3logic: Fix MMC name Tom Rini
[U-Boot] board: at91sam9x5: add environment var for cpu type Tom Rini
[U-Boot] configs: at91: sam9x5: added FIT and iminfo support Tom Rini
[U-Boot] configs: at91: sama5: enable CMD_IMI Tom Rini
[U-Boot] configs: sama5d27_som1_ek: enable w1 and overlay for mmc1 defconfig Tom Rini
[U-Boot] configs: sama5d2_xplained: enable w1 and overlay for emmc defconfig Tom Rini
[U-Boot] [U-Boot, 1/2] configs: sama5d2_ptc_ek: add default bootargs for NAND defconfig Tom Rini
[U-Boot] [U-Boot, 2/2] configs: sama5d2_ptc_ek: add default bootargs for MMC defconfig Tom Rini
[U-Boot] nand: atmel: Initialize pmecc smu with correct size Tom Rini
[U-Boot] [U-Boot,1/1] test: overlay: add missing include Tom Rini
[U-Boot] arm: udoo: Convert to distro config Tom Rini
[U-Boot] ARM: omap3_logic: Add NOR Flash Support for SOM-LV Tom Rini
[U-Boot] watchdog: aspeed: restore default value of reset_mask Tom Rini
[U-Boot] arm: ti: boot: Remove environment partition Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] [U-Boot, 27/45] binman: Add a test for Intel reference code Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] [PULL] Please pull u-boot-imx Tom Rini
[U-Boot] [PULL] Please pull u-boot-imx Tom Rini
[U-Boot] [PATCH v2 07/10] arm: dts: k3: Sync dts from Linux Tom Rini
[U-Boot] please pull u-boot-samsung master Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181025 Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] [PATCH] vf610twr: Enable thumb2 for builds Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] [PATCH 1/7] driver: net: consolidate ti's code in separate folder Tom Rini
[U-Boot] [PATCH 2/7] configs: net: convert DRIVER_TI_KEYSTONE_NET kconfig Tom Rini
[U-Boot] [PATCH 3/7] drivers: net: keystone_net: drop non dm code Tom Rini
[U-Boot] [PATCH 4/7] driver: net: ti: cpsw: update to use SPDX identifier Tom Rini
[U-Boot] [PATCH 5/7] driver: net: ti: introduce common mdio support library Tom Rini
[U-Boot] [PATCH 6/7] driver: net: ti: cpsw: switch to use common mdio lib Tom Rini
[U-Boot] [PATCH 7/7] driver: net: ti: keystone_net: switch to use common mdio lib Tom Rini
[U-Boot] [PATCH] vf610twr: Enable thumb2 for builds Tom Rini
[U-Boot] Pull request: u-boot-sunxi/master Tom Rini
[U-Boot] [PATCH] drivers: cosmetic: Convert SPDX license tags to Linux Kernel style Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] [PATCH 1/3] Kbuild: add LDFLAGS_STANDALONE Tom Rini
[U-Boot] [PATCH 2/3] Kbuild: standalone: do not ignore platform-specific OBJCOPYFLAGS Tom Rini
[U-Boot] Pull request v2: u-boot-sunix/master Tom Rini
[U-Boot] [ANN] U-Boot v2018.11-rc3 released Tom Rini
[U-Boot] [PATCH 1/4] nfs: convert supported_nfs_versions bitfield to an enum Tom Rini
[U-Boot] [PATCH] syscon: update syscon_node_to_regmap to use the DM functions Tom Rini
[U-Boot] [ANN] U-Boot v2018.11-rc3 released Tom Rini
[U-Boot] Please pull u-boot-mpc85xx master Tom Rini
[U-Boot] [PATCH 1/5] mmc: sunxi: add support for automatic delay calibration Maxime Ripard
[U-Boot] [PATCH 4/5] sun50i: a64: add support for R_I2C controller Maxime Ripard
[U-Boot] [PATCH 5/5] sunxi: add support for Pinebook Maxime Ripard
[U-Boot] [PATCH 5/5] sunxi: add support for Pinebook Maxime Ripard
[U-Boot] [PATCH 1/5] mmc: sunxi: add support for automatic delay calibration Maxime Ripard
[U-Boot] [PATCH v2 1/2] arm: new board - Emlid Neutis N5 support Maxime Ripard
[U-Boot] [PATCH v2 1/2] arm: new board - Emlid Neutis N5 support Maxime Ripard
[U-Boot] [PATCH v3 1/2] arm: new board - Emlid Neutis N5 support Maxime Ripard
[U-Boot] [PATCH] sunxi: fix DRAM gate/reset sequence of H6 Maxime Ripard
[U-Boot] [PATCH 1/4] sunxi: display: Fix h/vsync TCON polarity bits to indicate active-high Maxime Ripard
[U-Boot] [PATCH 4/4] sunxi: Add defconfig for the BananaPi with BL035 LCD module Maxime Ripard
[U-Boot] [PATCH] sunxi: Imply fitImage support Maxime Ripard
[U-Boot] [PATCH 1/3] pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypass Maxime Ripard
[U-Boot] [PATCH v2 5/5] sunxi: DT: add support for Pinebook Maxime Ripard
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Maxime Ripard
[U-Boot] [PATCH 1/5] sunxi: Fix typos of spelling Allwinner Maxime Ripard
[U-Boot] [PATCH 2/5] sunxi: docs: Unify the formatting style and add some paragraph breaks Maxime Ripard
[U-Boot] [PATCH 3/5] sunxi: docs: Mention CONFIG_NAND requirement Maxime Ripard
[U-Boot] [PATCH 4/5] sunxi: display: Mark sunxi_rgb2yuv_coef array as const Maxime Ripard
[U-Boot] [PATCH 5/5] sunxi: doc: Add basic fastboot example Maxime Ripard
[U-Boot] sunxi: add custom board Maxime Ripard
[U-Boot] [linux-sunxi] [PATCH 5/5] sunxi: doc: Add basic fastboot example Maxime Ripard
[U-Boot] [PATCH v2 0/6] sunxi: extend SPL header to propagate DRAM size and H6 3GiB DRAM support Maxime Ripard
[U-Boot] sunxi: add custom board Maxime Ripard
[U-Boot] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board Maxime Ripard
[U-Boot] [PATCH] sunxi: fix build error on non-ARM64 boards Maxime Ripard
[U-Boot] [PATCH] sunxi: lower the DDR frequency of Orange Pi Prime Maxime Ripard
[U-Boot] [PATCH] sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD Maxime Ripard
[U-Boot] [PATCH 0/4] sunxi: A64/H3/H5 DT updates Maxime Ripard
[U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Peter Robinson
[U-Boot] [PATCH RESEND 1/2] rockchip: make_fit_atf: use elf entry point Peter Robinson
[U-Boot] [PATCH v3 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs Peter Robinson
[U-Boot] [PATCH v3 1/4] arm: dts: rockchip: add some common pin-settings to rk3399 Peter Robinson
[U-Boot] [PATCH v3 3/4] rockchip: rk3399: Add Rock960 CE board support Peter Robinson
[U-Boot] [ANN] U-Boot v2018.11-rc3 released Peter Robinson
[U-Boot] [PATCH v5] spi: Add SPI driver for MT76xx SoCs Stefan Roese
[U-Boot] [PATCH] sf: Add XMC xm25qh64a and xm25qh128a entries Stefan Roese
[U-Boot] [PATCH] mtd: nand: spi: Add Gigadevice SPI NAND support Stefan Roese
[U-Boot] [PATCH] mtd: nand: spi: Add Gigadevice SPI NAND support Stefan Roese
[U-Boot] [PATCH] net: Add MT76xx ethernet driver Stefan Roese
[U-Boot] [PATCH] gpio: Add MT7621 GPIO support Stefan Roese
[U-Boot] [PATCH] wdt: Add MT7621 watchdog driver Stefan Roese
[U-Boot] [PATCH] common: Add arch_misc_init() prototype to include/init.h Stefan Roese
[U-Boot] [PATCH v5] spi: Add SPI driver for MT76xx SoCs Stefan Roese
[U-Boot] [PATCH] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH v2] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH] gpio: Add MT7621 GPIO support Stefan Roese
[U-Boot] [PATCH v2] gpio: Add MT7621 GPIO support Stefan Roese
[U-Boot] [PATCH] net: Add MT76xx ethernet driver Stefan Roese
[U-Boot] [PATCH v2] net: Add MT76xx ethernet driver Stefan Roese
[U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Stefan Roese
[U-Boot] [PATCH 02/14] mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR init Stefan Roese
[U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init Stefan Roese
[U-Boot] [PATCH 04/14] mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Stefan Roese
[U-Boot] [PATCH 05/14] mips: mt76xx: Add GPIO DT nodes to mt7628a.dtsi Stefan Roese
[U-Boot] [PATCH 06/14] mips: mt76xx: Add watchdog DT node to mt7628a.dtsi Stefan Roese
[U-Boot] [PATCH 07/14] mips: mt76xx: Kconfig: Add ethernet and GPIO support Stefan Roese
[U-Boot] [PATCH 08/14] mips: mt76xx: Enable watchdog support Stefan Roese
[U-Boot] [PATCH 09/14] mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog) Stefan Roese
[U-Boot] [PATCH 10/14] mips: mt76xx: gardena-smart-gateway: Add LEDs to dts Stefan Roese
[U-Boot] [PATCH 11/14] mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def state Stefan Roese
[U-Boot] [PATCH 12/14] mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfig Stefan Roese
[U-Boot] [PATCH 13/14] mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get address Stefan Roese
[U-Boot] [PATCH 14/14] mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfig Stefan Roese
[U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Stefan Roese
[U-Boot] [PATCH v10 07/16] mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8 Stefan Roese
[U-Boot] [PATCH v2] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH v4 12/17] board_f: Use static print_cpuinfo if CONFIG_CPU is active Stefan Roese
[U-Boot] [PATCH v4 12/17] board_f: Use static print_cpuinfo if CONFIG_CPU is active Stefan Roese
[U-Boot] [PATCH v2 1/2] cpu: Add DM_FLAG_PRE_RELOC flag to various cpu drivers Stefan Roese
[U-Boot] [PATCH v2 2/2] cpu: sandbox: Add "u-boot, dm-pre-reloc" for all cpu nodes Stefan Roese
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH 1/4] x86: BayTrail: southcluster.asl: Change PCI 64 bit address range / region Stefan Roese
[U-Boot] [PATCH 2/4] x86: theadorable-x86-common: Change pci hotplug cmdline parameters (again) Stefan Roese
[U-Boot] [PATCH 3/4] x86: theadorable-x86: Generate and pass root=PARTUUID instead of /dev/sdaX Stefan Roese
[U-Boot] [PATCH 4/4] x86: theadorable-x86-xxx_defconfig: Move VGA BIOS to make room for U-Boot Stefan Roese
[U-Boot] [PATCH] arm: mvebu: Move PCI(e) MBUS window to end of RAM Stefan Roese
[U-Boot] [PATCH 1/2] net: mvpp2: fix polarity of PHY reset signal Stefan Roese
[U-Boot] [PATCH 2/2] net: mvpp2: increase PHY reset pulse Stefan Roese
[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K Stefan Roese
[U-Boot] [PATCH v2] net: Add MT76xx ethernet driver Stefan Roese
[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K Stefan Roese
[U-Boot] socfpga cyclone5 dts Stefan Roese
[U-Boot] [PATCH] arm: mvebu: Move PCI(e) MBUS window to end of RAM Stefan Roese
[U-Boot] [PATCH 1/2] arm: mvebu: armada-xp-theadorable.dts: Add "spi-flash" compatible property Stefan Roese
[U-Boot] [PATCH 2/2] arm: mvebu: armada-xp-theadorable.dts: Change CS# for 2nd FPGA Stefan Roese
[U-Boot] [PATCH v3] net: Add MT76xx ethernet driver Stefan Roese
[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K Stefan Roese
[U-Boot] MT76XX-driver Stefan Roese
[U-Boot] [PATCH v4] net: Add MT7622 ethernet driver Stefan Roese
[U-Boot] MT76XX-driver Stefan Roese
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH v5] net: Add MT7628 ethernet driver Stefan Roese
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Stefan Roese
[U-Boot] [PATCH v5] net: Add MT7628 ethernet driver Stefan Roese
[U-Boot] [PATCH v6] net: Add MT7628 ethernet driver Stefan Roese
[U-Boot] [PATCH] arm: socfpga: fix bootcounter by reserving SRAM Stefan Roese
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Stefan Roese
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Stefan Roese
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Stefan Roese
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Stefan Roese
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Stefan Roese
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Stefan Roese
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Stefan Roese
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Stefan Roese
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Stefan Roese
[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init() Stefan Roese
[U-Boot] [PATCH] cmd: ubi: Make ubi_detach() static Stefan Roese
[U-Boot] [PATCH 2/2] arm64: mvebu: a8k: autodetect RAM size Stefan Roese
[U-Boot] [PATCH v2 07/13] x86: Fix signed shift overflow in MSR_IA32_APICBASE_BASE Eugeniu Rosca
[U-Boot] [PATCH v3 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs Manivannan Sadhasivam
[U-Boot] [PATCH v3 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs Manivannan Sadhasivam
[U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support Manivannan Sadhasivam
[U-Boot] Rockchip RV1108 eMMC support not working Otavio Salvador
[U-Boot] [PATCH v3 4/4] pico-imx7d: Add USB Host support Otavio Salvador
[U-Boot] Rockchip RV1108 eMMC support not working Otavio Salvador
[U-Boot] [PATCH 1/5] ARM: vexpress-ca9x4_defconfig: Enable CMD_UBI support Otavio Salvador
[U-Boot] [PATCH 2/5] ARM: rpi_3_32b_defconfig: Add FS_UUID command Otavio Salvador
[U-Boot] [PATCH 3/5] clk_rv1108: Sync with vendor tree Otavio Salvador
[U-Boot] [PATCH 4/5] rv1108: Enable eMMC support Otavio Salvador
[U-Boot] [PATCH 5/5] rv1108: Make USB OTG functional Otavio Salvador
[U-Boot] [PATCH v2 1/6] ARM: vexpress-ca9x4_defconfig: Enable CMD_UBI support Otavio Salvador
[U-Boot] [PATCH v2 2/6] ARM: rpi_*_defconfig: Add support to find UUID for filesystem Otavio Salvador
[U-Boot] [PATCH v2 3/6] clk_rv1108: Sync with vendor tree Otavio Salvador
[U-Boot] [PATCH v2 4/6] rv1108: Enable eMMC support Otavio Salvador
[U-Boot] [PATCH v2 5/6] rv1108: Make USB OTG functional Otavio Salvador
[U-Boot] [PATCH v2 6/6] rv1108: Add support for default distro_bootcmd Otavio Salvador
[U-Boot] [PATCH 2/5] ARM: rpi_3_32b_defconfig: Add FS_UUID command Otavio Salvador
[U-Boot] [PATCH 1/4] clk_rv1108: Sync with vendor tree Otavio Salvador
[U-Boot] [PATCH 2/4] rv1108: Enable eMMC support Otavio Salvador
[U-Boot] [PATCH 3/4] rv1108: Make USB OTG functional Otavio Salvador
[U-Boot] [PATCH 4/4] rv1108: Add support for default distro_bootcmd Otavio Salvador
[U-Boot] [PATCH] board: toradex: turn off lcd backlight before OS handover Philippe Schenker
[U-Boot] [PATCH] net: e1000: support 'write_hwaddr' in DM Hannes Schmelzer
[U-Boot] [PATCH] x86/bootm: fix error handling in boot_prep_linux(...) Hannes Schmelzer
[U-Boot] [PATCH] x86/bootm: fix compressed image boot Hannes Schmelzer
[U-Boot] [PATCH] x86/bootm: fix compressed image boot Hannes Schmelzer
[U-Boot] [PATCH] x86: make the LAPIC / IOAPIC construct switchable with Kconfig Hannes Schmelzer
[U-Boot] [PATCH] x86: make X86IRQ per Kconfig switchable Hannes Schmelzer
[U-Boot] [PATCH] x86: make X86IRQ per Kconfig switchable Hannes Schmelzer
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Hannes Schmelzer
[U-Boot] x86: board / CPU reset? Hannes Schmelzer
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Hannes Schmelzer
[U-Boot] [PATCH v2] net: e1000: support 'write_hwaddr' in DM Hannes Schmelzer
[U-Boot] [PATCH] net: e1000: support 'write_hwaddr' in DM Hannes Schmelzer
[U-Boot] [PATCH] x86: Fix car_uninit weak symbol definition Hannes Schmelzer
[U-Boot] [PATCH v2] net: e1000: support 'write_hwaddr' in DM Hannes Schmelzer
[U-Boot] [PATCH 5/7] driver: net: ti: introduce common mdio support library Hannes Schmelzer
[U-Boot] [PATCH v2] net: e1000: support 'write_hwaddr' in DM Hannes Schmelzer
[U-Boot] [PATCH v2] i2c: Add support for the Arm's Versatile Express I2C controller. Heiko Schocher
[U-Boot] Please pull from u-boot-i2c Heiko Schocher
[U-Boot] [PATCH] i2c: fix: Add support for the Arm's Versatile Express I2C controller Heiko Schocher
[U-Boot] i2c: Fix pca953x endianess issue, commit daa75b34828d45b7c1d63009188d45f4a32d06ba Heiko Schocher
[U-Boot] [PATCH] i2c: fix: Add support for the Arm's Versatile Express I2C controller Heiko Schocher
[U-Boot] Please pull from u-boot-i2c Heiko Schocher
[U-Boot] [PATCH] i2c: imx_lpi2c: fix typo and register base address format Heiko Schocher
[U-Boot] [PATCH 1/1] arm: do not include efi_loader.h twice Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: remove lcd.h from efi_net.c Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: fix simple network protocol Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: memory leak in efi_set_variable() Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: superfluous statement in is_dir() Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: return type efi_console_register() Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: error handling in read_console() Heinrich Schuchardt
[U-Boot] [PATCH 1/1] fs: fat: memory leak in fat_unlink() Heinrich Schuchardt
[U-Boot] [PATCH 1/1] fs: fat: fix set_cluster() Heinrich Schuchardt
[U-Boot] [PATCH v2 5/6] arm: efi: Generate Microsoft PE format compliant images Heinrich Schuchardt
[U-Boot] [PATCH v2 4/6] pe.h: Add characteristics defines Heinrich Schuchardt
[U-Boot] [PATCH 4/5] arm: efi: Generate Microsoft PE format complaint images Heinrich Schuchardt
[U-Boot] [PATCH v2 6/6] riscv: efi: Generate Microsoft PE format compliant images Heinrich Schuchardt
[U-Boot] [PATCH v2 2/6] x86: efi: payload: Generate Microsoft PE format compliant image Heinrich Schuchardt
[U-Boot] [PATCH v2 3/6] x86: efi: app: Generate Microsoft PE format compliant image Heinrich Schuchardt
[U-Boot] [PATCH 1/1 for v2018.11-rc2] efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...) Heinrich Schuchardt
[U-Boot] [U-Boot,1/1] efi_loader: create root node Heinrich Schuchardt
[U-Boot] [PATCH 1/1, for v2018.11-rc2] efi_loader: execute efi_save_gd() first Heinrich Schuchardt
[U-Boot] [PATCH v2 1/1, for v2018.11-rc2] efi_loader: execute efi_save_gd() first Heinrich Schuchardt
[U-Boot] [PATCH v2 1/1, for v2018.11-rc2] efi_loader: fix simple network protocol Heinrich Schuchardt
[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: set image_base and image_size to correct values Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: set image_base and image_size to correct values Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: correct signature of GetPosition, SetPosition Heinrich Schuchardt
[U-Boot] [U-Boot, 1/1] docs: kernel-doc: fix parsing of function pointers Heinrich Schuchardt
[U-Boot] bootefi selftest on qemu-x86_64 Heinrich Schuchardt
[U-Boot] [PATCH 02/11] efi_loader: Initial HII protocols Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: set image_base and image_size to correct values Heinrich Schuchardt
[U-Boot] [PATCH 1/1] test: overlay: add missing include Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: PSCI reset and shutdown for EL1 Heinrich Schuchardt
[U-Boot] [PATCH 1/1] cmd: add el command Heinrich Schuchardt
[U-Boot] [PATCH 1/1] cmd: add el command Heinrich Schuchardt
[U-Boot] [PATCH 1/1] cmd/bdinfo: correct output of numerical values Heinrich Schuchardt
[U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values Heinrich Schuchardt
[U-Boot] [PATCH 3/4] x86: doc: Mention qemu-x86_64 support Heinrich Schuchardt
[U-Boot] [PATCH 1/4] x86: Specify -march=core2 to build 64-bit U-Boot proper Heinrich Schuchardt
[U-Boot] [PATCH 3/4] x86: doc: Mention qemu-x86_64 support Heinrich Schuchardt
[U-Boot] [PATCH 2/4] x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build Heinrich Schuchardt
[U-Boot] [U-Boot,11/45] rtc: Allow use of RTC in SPL and TPL Heinrich Schuchardt
[U-Boot] [PATCH 1/1] x86: qemu: enable CONFIG_SPL_DM_RTC Heinrich Schuchardt
[U-Boot] [U-Boot,11/45] rtc: Allow use of RTC in SPL and TPL Heinrich Schuchardt
[U-Boot] [PATCH 4/4] WIP: travis: Add qemu-x86_64 target for test.py testing Heinrich Schuchardt
[U-Boot] [PATCH 1/1] common: command: fix typo Heinrich Schuchardt
[U-Boot] [PATCH 4/4] WIP: travis: Add qemu-x86_64 target for test.py testing Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: fix relocation on x86_64 Heinrich Schuchardt
[U-Boot] [PATCH 1/1] x86: put global data pointer into the .text section Heinrich Schuchardt
[U-Boot] [PATCH 4/4] WIP: travis: Add qemu-x86_64 target for test.py testing Heinrich Schuchardt
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Heinrich Schuchardt
[U-Boot] [PATCH v2 1/1] efi_loader: PSCI reset and shutdown Heinrich Schuchardt
[U-Boot] [PATCH v2 1/1] x86: put global data pointer into the .data section Heinrich Schuchardt
[U-Boot] efi_loader: handling of global data in *.efi files Heinrich Schuchardt
[U-Boot] [PATCH 02/12] x86: Ensure no instruction sets of MMX/SSE are generated in 64-bit build Heinrich Schuchardt
[U-Boot] [PATCH 03/12] x86: doc: Mention qemu-x86_64 support Heinrich Schuchardt
[U-Boot] [PATCH 04/12] x86: doc: Remove stale sections of 64-bit support Heinrich Schuchardt
[U-Boot] [PATCH 09/12] x86: Fix the mystery of printch() during 64-bit boot Heinrich Schuchardt
[U-Boot] [PATCH 10/12] x86: tsc: Introduce config option for early timer frequency Heinrich Schuchardt
[U-Boot] [PATCH 11/12] x86: quark: Specify X86_TSC_TIMER_EARLY_FREQ Heinrich Schuchardt
[U-Boot] [PATCH 1/1] sandbox: remove stray DEBUG Heinrich Schuchardt
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Heinrich Schuchardt
[U-Boot] [PATCH 1/1] sandbox: README: setting environment variables Heinrich Schuchardt
[U-Boot] [PATCH 1/1] sandbox: README: use setenv ethrotate no Heinrich Schuchardt
[U-Boot] [PATCH 1/1] sandbox: clone host Ethernet address Heinrich Schuchardt
[U-Boot] [PATCH v2 1/1] efi_loader: PSCI reset and shutdown Heinrich Schuchardt
[U-Boot] [PATCH v3 1/1] efi_loader: PSCI reset and shutdown Heinrich Schuchardt
[U-Boot] [PATCH v11 1/6] sandbox: Put CPUs under a cpu-bus node Heinrich Schuchardt
[U-Boot] [PATCH v11 2/6] efi_loader: Drop setup_ok Heinrich Schuchardt
[U-Boot] [PATCH v11 4/6] efi: Split out test init/uninit into functions Heinrich Schuchardt
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: implement EFI_RESET_SHUTDOWN at boot time Heinrich Schuchardt
[U-Boot] [PATCH 1/1] sandbox: dt: sandbox.dts set skip-localhost = <1> Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: unset CONFIG_EFI_LOADER on vf610twr Heinrich Schuchardt
[U-Boot] [PATCH v3 1/1] efi_loader: PSCI reset and shutdown Heinrich Schuchardt
[U-Boot] [U-Boot,2/6] efi_loader: add efi_dp_from_name() Heinrich Schuchardt
[U-Boot] [U-Boot,2/6] efi_loader: add efi_dp_from_name() Heinrich Schuchardt
[U-Boot] [PATCH v4 1/1] efi_loader: PSCI reset and shutdown Heinrich Schuchardt
[U-Boot] [PATCH v4 1/1] efi_loader: PSCI reset and shutdown Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: fix typos in efi_device_path.c Heinrich Schuchardt
[U-Boot] [PATCH v5 1/1] efi_loader: PSCI reset and shutdown Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_loader: fix typos Heinrich Schuchardt
[U-Boot] efi-next: Kconfig: error: recursive dependency detected! Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_selftest: do not write to linker generated array Heinrich Schuchardt
[U-Boot] [PATCH v11 2/6] efi_loader: Drop setup_ok Heinrich Schuchardt
[U-Boot] [PATCH v3 0/3] efi_loader: fix simple network protocol Heinrich Schuchardt
[U-Boot] [PATCH v3 2/3] efi_loader: correctly aligned transmit buffer Heinrich Schuchardt
[U-Boot] [PATCH v3 3/3] efi_loader: fix simple network protocol Heinrich Schuchardt
[U-Boot] [PATCH v3 1/3] efi_selftest: fix simple network protocol test Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_selftest: do not write to linker generated array Heinrich Schuchardt
[U-Boot] [PATCH 1/1] efi_selftest: rename setup_ok Heinrich Schuchardt
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Heinrich Schuchardt
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Heinrich Schuchardt
[U-Boot] [PATCH 1/1] x86: detect unsupported relocation types Heinrich Schuchardt
[U-Boot] [PATCH] x86: Fix car_uninit weak symbol definition Heinrich Schuchardt
[U-Boot] [PATCH 1/1] dm: video: correctly set the cursor position Heinrich Schuchardt
[U-Boot] [PATCH v2 1/1] dm: video: correctly set the cursor position Heinrich Schuchardt
[U-Boot] [PATCH 1/1] fs: fat: validate sector and cluster size Heinrich Schuchardt
[U-Boot] [PATCH v3 10/26] fs: fat: support write with non-zero offset Heinrich Schuchardt
[U-Boot] [PATCH 3/3] net: phy: mscc: add support for VSC8574 PHY Quentin Schulz
[U-Boot] [PATCH 1/3] net: phy: mscc: add support for VSC8584 PHY Quentin Schulz
[U-Boot] [PATCH v2 0/3] add support for VSC8584 and VSC8574 Microsemi PHYs Quentin Schulz
[U-Boot] [PATCH v2 1/3] net: phy: mscc: add support for VSC8584 PHY Quentin Schulz
[U-Boot] [PATCH v2 2/3] net: phy: mscc: factorize part of config function for VSC8584 Quentin Schulz
[U-Boot] [PATCH v2 3/3] net: phy: mscc: add support for VSC8574 PHY Quentin Schulz
[U-Boot] [PATCH] wdt: Add MT7621 watchdog driver Daniel Schwierzeck
[U-Boot] [PATCH] gpio: Add MT7621 GPIO support Daniel Schwierzeck
[U-Boot] [PATCH] net: Add MT76xx ethernet driver Daniel Schwierzeck
[U-Boot] [PATCH v10 07/16] mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8 Daniel Schwierzeck
[U-Boot] [PATCH v10 12/16] regmap: Add endianness support Daniel Schwierzeck
[U-Boot] [PATCH v2] net: Add MT76xx ethernet driver Daniel Schwierzeck
[U-Boot] [PATCH v2] gpio: Add MT7621 GPIO support Daniel Schwierzeck
[U-Boot] [PATCH v2 7/7] MIPS: bootm: Add support for Vcore III linux kernel Daniel Schwierzeck
[U-Boot] [PATCH v2 3/7] MSCC: add support for Ocelot SoCs Daniel Schwierzeck
[U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init Daniel Schwierzeck
[U-Boot] [PATCH v2] gpio: Add MT7621 GPIO support Daniel Schwierzeck
[U-Boot] [PATCH] wdt: Add MT7621 watchdog driver Daniel Schwierzeck
[U-Boot] [PATCH 02/14] mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR init Daniel Schwierzeck
[U-Boot] [PATCH 04/14] mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Daniel Schwierzeck
[U-Boot] [PATCH 1/3] Kbuild: add LDFLAGS_STANDALONE Daniel Schwierzeck
[U-Boot] [PATCH 2/3] Kbuild: standalone: do not ignore platform-specific OBJCOPYFLAGS Daniel Schwierzeck
[U-Boot] [PATCH] drivers: serial: probe all serial devices Vabhav Sharma
[U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices Vabhav Sharma
[U-Boot] [PATCH] drivers: serial: probe all serial devices Vabhav Sharma
[U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices Vabhav Sharma
[U-Boot] [PATCH] drivers: serial: probe all serial devices Vabhav Sharma
[U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices Vabhav Sharma
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Andy Shevchenko
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Andy Shevchenko
[U-Boot] [BUG] efi-x86_app_defconfig does not build with gcc 8.2 Andy Shevchenko
[U-Boot] [PATCH v1] x86: acpi: Remove redundant Offset (0x00) Andy Shevchenko
[U-Boot] [PATCH 1/2] net: mvpp2: fix polarity of PHY reset signal Baruch Siach
[U-Boot] [PATCH 2/2] net: mvpp2: increase PHY reset pulse Baruch Siach
[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K Baruch Siach
[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K Baruch Siach
[U-Boot] [PATCH] configs: add SolidRun Clearfog GT 8K Baruch Siach
[U-Boot] [PATCH v2] ARM: mvebu: dts: add Clearfog GT-8K Baruch Siach
[U-Boot] [PATCH 1/2] linux/sizes.h: sync from kernel Baruch Siach
[U-Boot] [PATCH 2/2] arm64: mvebu: a8k: autodetect RAM size Baruch Siach
[U-Boot] [PATCH] fdt: restore board_fdt_blob_setup() declaration Baruch Siach
[U-Boot] [PATCH 2/2] arm64: mvebu: a8k: autodetect RAM size Baruch Siach
[U-Boot] [PATCH v2] arm: zynq: Add support for DLC20 board Michal Simek
[U-Boot] [PATCH v3] usb: dwc3: convert to livetree Michal Simek
[U-Boot] [PATCH] arm64: gic: Do gicv3 secure initialization based on EL level Michal Simek
[U-Boot] [PATCH] serial: pl01x: Get clock from clock node if no clock property found Michal Simek
[U-Boot] [PATCH 0/3] Add support for new Xilinx Versal ACAPs Michal Simek
[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs Michal Simek
[U-Boot] [PATCH 2/3] net: gem: Do not setup any clock for Xilinx SoC Versal Michal Simek
[U-Boot] [PATCH 3/3] arm64: versal: Add Xilinx Versal Virtual QEMU board Michal Simek
[U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage Michal Simek
[U-Boot] Please pull u-boot-dm Michal Simek
[U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage Michal Simek
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Michal Simek
[U-Boot] [PATCH] spl: ram: Fix u_boot_pos calculation Michal Simek
[U-Boot] [PATCH] spl: spi: Do not hardcode fixed size for header Michal Simek
[U-Boot] [PATCH] Revert "test/py: Import 'configparser' lower case to be python 3.x safe" Michal Simek
[U-Boot] [PATCH] arm: zynq: Add efuse node for Zynq-7000S devices Michal Simek
[U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage Michal Simek
[U-Boot] [PATCH] xilinx: Sync defconfigs with current Kconfig Michal Simek
[U-Boot] [PATCH v1 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT Michal Simek
[U-Boot] [PATCH] arm64: zynqmp: Enable CDC ethernet gadget for zcu100/Ultra96 Michal Simek
[U-Boot] [PATCH v2 04/17] test/py: Fix unicode handling for log filtering Michal Simek
[U-Boot] [PATCH] Revert "test/py: Import 'configparser' lower case to be python 3.x safe" Michal Simek
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Michal Simek
[U-Boot] [PATCH 1/3] arm64: zynqmp: Move TCM initialization to a separate routine Michal Simek
[U-Boot] [PATCH 2/3] arm64: zynqmp: Add new command for TCM initialization Michal Simek
[U-Boot] [PATCH 3/3] arm64: zynqmp: Enable MP by default via Kconfig Michal Simek
[U-Boot] [PATCH 2/2] arm: zynq: Enable FIT fpga loading in SPL for zc706 Michal Simek
[U-Boot] [PATCH v2] arm: zynq: Add support for DLC20 board Michal Simek
[U-Boot] [PATCH] arm: zynq: Add efuse node for Zynq-7000S devices Michal Simek
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Michal Simek
[U-Boot] [PATCH 0/3] Add support for new Xilinx Versal ACAPs Michal Simek
[U-Boot] [PATCH] cmd: kgdb: Enable kgdb only for PPC Michal Simek
[U-Boot] [PATCH] Revert "fdt: fdtdec_setup_memory_banksize() use livetree" Michal Simek
[U-Boot] ZYNQ ZC706 Board Michal Simek
[U-Boot] [GIT PULL] Xilinx changes for v2018.11-rc2 Michal Simek
[U-Boot] [GIT PULL] Xilinx changes for v2018.11-rc2 Michal Simek
[U-Boot] [PATCH] serial: pl01x: Get clock from clock node if no clock property found Michal Simek
[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs Michal Simek
[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs Michal Simek
[U-Boot] [PATCH] serial: pl01x: Get clock from clock node if no clock property found Michal Simek
[U-Boot] [GIT PULL] Xilinx changes for v2018.11-rc2 Michal Simek
[U-Boot] [GIT PULL] Xilinx changes for v2018.11-rc2 v2 Michal Simek
[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs Michal Simek
[U-Boot] [PATCH] arm: zynq: Setup non zero SPL FIT load address Michal Simek
[U-Boot] [PATCH 1/3] scsi: ceva: add ls2080a soc support Michal Simek
[U-Boot] [PATCH v9 12/16] regmap: Add endianness support Mario Six
[U-Boot] [PATCH v10 01/16] test: regmap: Increase size of syscon0 memory Mario Six
[U-Boot] [PATCH v10 02/16] regmap: Fix documentation Mario Six
[U-Boot] [PATCH v10 03/16] regmap: Add documentation Mario Six
[U-Boot] [PATCH v10 04/16] regmap: Improve error handling Mario Six
[U-Boot] [PATCH v10 05/16] regmap: Introduce init_range Mario Six
[U-Boot] [PATCH v10 06/16] regmap: Add error output Mario Six
[U-Boot] [PATCH v10 07/16] mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8 Mario Six
[U-Boot] [PATCH v10 08/16] regmap: Add raw read/write functions Mario Six
[U-Boot] [PATCH v10 09/16] regmap: Support reading from specific range Mario Six
[U-Boot] [PATCH v10 10/16] regmap: Define regmap_{get,set} Mario Six
[U-Boot] [PATCH v10 11/16] test: regmap: Add test for regmap_{set, get} Mario Six
[U-Boot] [PATCH v10 12/16] regmap: Add endianness support Mario Six
[U-Boot] [PATCH v10 13/16] regmap: Add overview documentation Mario Six
[U-Boot] [PATCH v10 14/16] misc: Sort Makefile entries Mario Six
[U-Boot] [PATCH v10 15/16] misc: Add gdsys_soc driver Mario Six
[U-Boot] [PATCH v10 16/16] misc: Add IHS FPGA driver Mario Six
[U-Boot] [PATCH] core: ofnode: Fix mem leak in error path Mario Six
[U-Boot] [PATCH] mpc83xx: Mark boards as orphaned Mario Six
[U-Boot] [PATCH] mpc83xx: Mark boards as orphaned Mario Six
[U-Boot] [PATCH 1/2] MAINTAINERS: Update Holger's address Mario Six
[U-Boot] [PATCH 2/2] mpc83xx: Mark boards as orphaned Mario Six
[U-Boot] i2c: Fix pca953x endianess issue, commit daa75b34828d45b7c1d63009188d45f4a32d06ba Mario Six
[U-Boot] [PATCH 01/48] mpc83xx: Introduce ARCH_MPC830* Mario Six
[U-Boot] [PATCH 00/48] mpc83xx: Kconfig migrations Mario Six
[U-Boot] [PATCH v2 2/8] cpu: mpc83xx: Remove unnecessary characters in the description string Mario Six
[U-Boot] [PATCH v10 08/16] regmap: Add raw read/write functions Mario Six
[U-Boot] [PATCH v11 01/16] test: regmap: Increase size of syscon0 memory Mario Six
[U-Boot] [PATCH v11 02/16] regmap: Fix documentation Mario Six
[U-Boot] [PATCH v11 03/16] regmap: Add documentation Mario Six
[U-Boot] [PATCH v11 04/16] regmap: Improve error handling Mario Six
[U-Boot] [PATCH v11 05/16] regmap: Introduce init_range Mario Six
[U-Boot] [PATCH v11 06/16] regmap: Add error output Mario Six
[U-Boot] [PATCH v11 07/16] mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8 Mario Six
[U-Boot] [PATCH v11 08/16] regmap: Add raw read/write functions Mario Six
[U-Boot] [PATCH v11 09/16] regmap: Support reading from specific range Mario Six
[U-Boot] [PATCH v11 10/16] regmap: Define regmap_{get,set} Mario Six
[U-Boot] [PATCH v11 11/16] test: regmap: Add test for regmap_{set, get} Mario Six
[U-Boot] [PATCH v11 12/16] regmap: Add endianness support Mario Six
[U-Boot] [PATCH v11 13/16] regmap: Add overview documentation Mario Six
[U-Boot] [PATCH v11 14/16] misc: Sort Makefile entries Mario Six
[U-Boot] [PATCH v11 15/16] misc: Add gdsys_soc driver Mario Six
[U-Boot] [PATCH v11 16/16] misc: Add IHS FPGA driver Mario Six
[U-Boot] [PATCH 0/3] Read SFDP parameters and access flash above 16MB Rajat Srivastava
[U-Boot] [PATCH 1/3] mtd/spi: Add JEDEC SFDP support in SPI framework Rajat Srivastava
[U-Boot] [PATCH 2/3] fsl_qspi: Access flash above 16MB using SFDP Rajat Srivastava
[U-Boot] [PATCH 3/3] spi_flash_ids: Enable SFDP parsing for s25fs512 flash Rajat Srivastava
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Rajat Srivastava
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Rajat Srivastava
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Rajat Srivastava
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Rajat Srivastava
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Rajat Srivastava
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) Rajat Srivastava
[U-Boot] [PATCH 0/3] Read SFDP parameters and access flash above 16MB Rajat Srivastava
[U-Boot] [PATCH 1/3] mtd/spi: Add JEDEC SFDP support in SPI framework Rajat Srivastava
[U-Boot] [PATCH 1/3] mtd/spi: Add JEDEC SFDP support in SPI framework Rajat Srivastava
[U-Boot] [PATCH 0/3] Read SFDP parameters and access flash above 16MB Rajat Srivastava
[U-Boot] [PATCH] QSPI flash driver compatibility fixes for mx6ull Neil Stainton
[U-Boot] [PATCH v3 01/13] net: ftgmac100: use the BIT() macro Joel Stanley
[U-Boot] [PATCH v3 02/13] net: ftgmac100: use the aligned() macro Joel Stanley
[U-Boot] [PATCH v3 03/13] net: ftgmac100: convert to driver model Joel Stanley
[U-Boot] [PATCH v3 04/13] net: ftgmac100: use setbits_le32() in the reset method Joel Stanley
[U-Boot] [PATCH v3 05/13] net: ftgmac100: add MDIO bus and phylib support Joel Stanley
[U-Boot] [PATCH v3 06/13] net: ftgmac100: convert the RX/TX descriptor arrays Joel Stanley
[U-Boot] [PATCH v3 07/13] net: ftgmac100: handle timeouts when transmitting Joel Stanley
[U-Boot] [PATCH v3 08/13] net: ftgmac100: add clock support Joel Stanley
[U-Boot] [PATCH v3 10/13] net: ftgmac100: Add support for the Aspeed SoC Joel Stanley
[U-Boot] [PATCH v3 12/13] aspeed: Activate ethernet devices on the ast2500 Eval Board Joel Stanley
[U-Boot] [PATCH v3 13/13] aspeed: ast2500: fix D2-PLL clock setting in RGMII mode Joel Stanley
[U-Boot] [PATCH v6 0/5] dma: add channels support Grygorii Strashko
[U-Boot] [PATCH v6 1/5] dma: move dma_ops to dma-uclass.h Grygorii Strashko
[U-Boot] [PATCH v6 2/5] dma: add channels support Grygorii Strashko
[U-Boot] [PATCH v6 3/5] sandbox: dma: add dma-uclass test Grygorii Strashko
[U-Boot] [NOT-FOR-MERGE-PATCH v6 4/5] dma: ti: add driver to K3 UDMA Grygorii Strashko
[U-Boot] [NOT-FOR-MERGE-PATCH v6 5/5] net: ethernet: ti: introduce am654 gigabit eth switch subsystem driver Grygorii Strashko
[U-Boot] [PATCH 0/7] driver: net: ti: clean up and code optimization Grygorii Strashko
[U-Boot] [PATCH 1/7] driver: net: consolidate ti's code in separate folder Grygorii Strashko
[U-Boot] [PATCH 2/7] configs: net: convert DRIVER_TI_KEYSTONE_NET kconfig Grygorii Strashko
[U-Boot] [PATCH 3/7] drivers: net: keystone_net: drop non dm code Grygorii Strashko
[U-Boot] [PATCH 4/7] driver: net: ti: cpsw: update to use SPDX identifier Grygorii Strashko
[U-Boot] [PATCH 5/7] driver: net: ti: introduce common mdio support library Grygorii Strashko
[U-Boot] [PATCH 6/7] driver: net: ti: cpsw: switch to use common mdio lib Grygorii Strashko
[U-Boot] [PATCH 7/7] driver: net: ti: keystone_net: switch to use common mdio lib Grygorii Strashko
[U-Boot] [PATCH 5/7] driver: net: ti: introduce common mdio support library Grygorii Strashko
[U-Boot] [PATCH v2 0/7] driver: net: ti: clean up and code optimization Grygorii Strashko
[U-Boot] [PATCH v2 1/7] driver: net: consolidate ti's code in separate folder Grygorii Strashko
[U-Boot] [PATCH v2 2/7] configs: net: convert DRIVER_TI_KEYSTONE_NET kconfig Grygorii Strashko
[U-Boot] [PATCH v2 3/7] drivers: net: keystone_net: drop non dm code Grygorii Strashko
[U-Boot] [PATCH v2 4/7] driver: net: ti: cpsw: update to use SPDX identifier Grygorii Strashko
[U-Boot] [PATCH v2 5/7] driver: net: ti: introduce common mdio support library Grygorii Strashko
[U-Boot] [PATCH v2 6/7] driver: net: ti: cpsw: switch to use common mdio lib Grygorii Strashko
[U-Boot] [PATCH v2 7/7] driver: net: ti: keystone_net: switch to use common mdio lib Grygorii Strashko
[U-Boot] [PATCH v3 0/7] driver: net: ti: clean up and code optimization Grygorii Strashko
[U-Boot] [PATCH v3 1/7] driver: net: consolidate ti's code in separate folder Grygorii Strashko
[U-Boot] [PATCH v3 2/7] configs: net: convert DRIVER_TI_KEYSTONE_NET kconfig Grygorii Strashko
[U-Boot] [PATCH v3 3/7] drivers: net: keystone_net: drop non dm code Grygorii Strashko
[U-Boot] [PATCH v3 4/7] driver: net: ti: cpsw: update to use SPDX identifier Grygorii Strashko
[U-Boot] [PATCH v3 5/7] driver: net: ti: introduce common mdio support library Grygorii Strashko
[U-Boot] [PATCH v3 6/7] driver: net: ti: cpsw: switch to use common mdio lib Grygorii Strashko
[U-Boot] [PATCH v3 7/7] driver: net: ti: keystone_net: switch to use common mdio lib Grygorii Strashko
[U-Boot] [PATCH 1/2] rockchip: rk3188: add support for usb-uart functionality Heiko Stuebner
[U-Boot] [PATCH 2/2] rockchip: rk3188: fix early uart setup Heiko Stuebner
[U-Boot] [PATCH 01/18] gpio: mpc8xxx: add support for Layerscape SoC York Sun
[U-Boot] [PATCH 01/18] gpio: mpc8xxx: add support for Layerscape SoC York Sun
[U-Boot] [PATCH 15/18] armv8: ls1088a: add i2c entry York Sun
[U-Boot] [PATCH 03/18] armv8: ls1043ardb: Enable GPIO driver York Sun
[U-Boot] [PATCH 07/53] armv8: ls1046ardb: Add TFABOOT defconfig York Sun
[U-Boot] [PATCH 09/53] armv8: ls1046a: make environment address and size common York Sun
[U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig York Sun
[U-Boot] [PATCH 13/53] armv8: ls1043aqds: define environment address for QSPI boot York Sun
[U-Boot] [PATCH 15/53] net: fm: add TFABOOT support York Sun
[U-Boot] [PATCH 16/53] drivers: qe: add TFABOOT support York Sun
[U-Boot] [PATCH 18/53] armv8: ls1043a: make FMAN and QE address common York Sun
[U-Boot] [PATCH 19/53] armv8: fsl-layerscape: bootcmd identification for TFABOOT. York Sun
[U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT York Sun
[U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas for TFABOOT York Sun
[U-Boot] [PATCH 29/53] armv8: layerscape: add SMC calls for DDR size and bank info. York Sun
[U-Boot] [PATCH v2 01/33] move data structure out of cpu.h York Sun
[U-Boot] [PATCH v2 10/33] armv8: layerscape: remove EL3 specific erratas for TFABOOT York Sun
[U-Boot] [PATCH v2 21/33] armv8: ls1046ardb: Add TFABOOT support York Sun
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value York Sun
[U-Boot] [PATCH v2 00/33] TF-A Boot support for NXP Chassis 2 platforms York Sun
[U-Boot] [RESEND PATCH v3 24/26] armv8: ls1012ardb: Add TFABOOT support York Sun
[U-Boot] [RESEND PATCH v3 25/26] armv8: ls1012aqds: Add TFABOOT support York Sun
[U-Boot] [PATCH] ls1012afrwy:update ls1012afrwy env board variable York Sun
[U-Boot] [PATCH 1/2] watchdog: driver support for fsl-lsch2 York Sun
[U-Boot] [PATCH v4 18/27] drivers: qe: add TFABOOT support York Sun
[U-Boot] [PATCH v4 00/27] TF-A Boot support for NXP Chassis 2 platforms York Sun
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) York Sun
[U-Boot] [PATCH v4 18/27] drivers: qe: add TFABOOT support York Sun
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) York Sun
[U-Boot] [PATCH v4 02/27] env: allow flash and nand env driver to compile together York Sun
[U-Boot] Pull request: u-boot-net.git master York Sun
[U-Boot] [PATCH v3] sf: Add auto detection of 4-byte mode (vs standard 3-byte mode) York Sun
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value York Sun
[U-Boot] [PATCH v2] fsl/usb: Workaround for USB erratum-A005275 York Sun
[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value York Sun
[U-Boot] Please pull u-boot-mpc85xx master York Sun
[U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Marek Szyprowski
[U-Boot] [RFC] efi: workaround for SCT (against unicode collation protocol) AKASHI Takahiro
[U-Boot] efi_loader: execute image's unload function AKASHI Takahiro
[U-Boot] [PATCH 1/1] fs: fat: memory leak in fat_unlink() AKASHI Takahiro
[U-Boot] [PATCH 1/1] efi_loader: set image_base and image_size to correct values AKASHI Takahiro
[U-Boot] [PATCH 1/1] efi_loader: set image_base and image_size to correct values AKASHI Takahiro
[U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values AKASHI Takahiro
[U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values AKASHI Takahiro
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r AKASHI Takahiro
[U-Boot] [PATCH 0/3] uefi: support USB boot in distro boot AKASHI Takahiro
[U-Boot] [PATCH 1/3] efi_loader: support USB boot in distro boot script AKASHI Takahiro
[U-Boot] [PATCH 2/3] ARM: qemu-arm: enable usb mass storage in default configuration AKASHI Takahiro
[U-Boot] [PATCH 3/3] ARM: qemu-arm: enable USB boot in distro boot with UEFI AKASHI Takahiro
[U-Boot] [PATCH 1/3] efi_loader: support USB boot in distro boot script AKASHI Takahiro
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r AKASHI Takahiro
[U-Boot] [PATCH 0/6] efi: make efi and bootmgr more usable AKASHI Takahiro
[U-Boot] [PATCH 1/6] fs: update fs_dev_part in fs_set_blk_dev_with_part() AKASHI Takahiro
[U-Boot] [PATCH 2/6] efi_loader: add efi_dp_from_name() AKASHI Takahiro
[U-Boot] [PATCH 3/6] efi_loader: bootmgr: add load option helper functions AKASHI Takahiro
[U-Boot] [PATCH 4/6] cmd: add efishell command AKASHI Takahiro
[U-Boot] [PATCH 5/6] bootefi: carve out fdt parameter handling AKASHI Takahiro
[U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option AKASHI Takahiro
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] [PATCH 2/3] ARM: qemu-arm: enable usb mass storage in default configuration AKASHI Takahiro
[U-Boot] [PATCH 0/6] efi: make efi and bootmgr more usable AKASHI Takahiro
[U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option AKASHI Takahiro
[U-Boot] [PATCH 3/6] efi_loader: bootmgr: add load option helper functions AKASHI Takahiro
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r AKASHI Takahiro
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r AKASHI Takahiro
[U-Boot] [PATCH 1/2] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] [PATCH] arm: qemu: rework Kconfig AKASHI Takahiro
[U-Boot] [PATCH] arm: qemu: rework Kconfig AKASHI Takahiro
[U-Boot] [PATCH v2 0/3] efi_loader: improve boot sequence in distro_bootcmd AKASHI Takahiro
[U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] [PATCH v2 2/3] ARM: qemu-arm: rework Kconfig AKASHI Takahiro
[U-Boot] [PATCH v2 3/3] ARM: qemu-arm: define fdt_addr_r AKASHI Takahiro
[U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option AKASHI Takahiro
[U-Boot] [PATCH 3/6] efi_loader: bootmgr: add load option helper functions AKASHI Takahiro
[U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] [PATCH 6/6] efi_loader: bootmgr: run an EFI application of a given load option AKASHI Takahiro
[U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script AKASHI Takahiro
[U-Boot] efi: utf8_utf16_strncpy? AKASHI Takahiro
[U-Boot] [PATCH v12 1/8] dm: drop unused helper in MTD header Jagan Teki
[U-Boot] [PATCH v12 1/8] dm: drop unused helper in MTD header Jagan Teki
[U-Boot] [PATCH v12 1/8] dm: drop unused helper in MTD header Jagan Teki
[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command Jagan Teki
[U-Boot] Pull request: u-boot-spi/master Jagan Teki
[U-Boot] [PATCH] mtd: spi: Add DM support to SH QSPI driver Jagan Teki
[U-Boot] [PATCH v12 0/8] SPI-NAND support (third batch) Jagan Teki
[U-Boot] [PATCH] sf: Add XMC xm25qh64a and xm25qh128a entries Jagan Teki
[U-Boot] [PATCH] mtd: nand: spi: Add Gigadevice SPI NAND support Jagan Teki
[U-Boot] [PATCH v5] spi: Add SPI driver for MT76xx SoCs Jagan Teki
[U-Boot] Pull request: u-boot-spi/master Jagan Teki
[U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers Jagan Teki
[U-Boot] [PATCH 18/20] spi: mtk_qspi: add qspi driver for MT7629 SoC Jagan Teki
[U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees Jagan Teki
[U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option Jagan Teki
[U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT Jagan Teki
[U-Boot] [PATCH V3] mtd: uboot: Fix hanging during mtd list command Jagan Teki
[U-Boot] [PATCH 1/3] spi: davinci: Add platdata support Jagan Teki
[U-Boot] [PATCH 2/3] board: da8xxevm: Add SPL DM for serial, spi Jagan Teki
[U-Boot] [PATCH 2/3] spi: Add support for the Aspeed ast2500 SPI controllers Jagan Teki
[U-Boot] [PATCH] driver/mtd: Add MICRON manufacturer id in spi framework Jagan Teki
[U-Boot] [PATCH v3 1/2] arm: new board - Emlid Neutis N5 support Jagan Teki
[U-Boot] [linux-sunxi] Re: [PATCH] sunxi: fix DRAM gate/reset sequence of H6 Jagan Teki
[U-Boot] [PATCH V3] mtd: uboot: Fix hanging during mtd list command Jagan Teki
[U-Boot] [PATCH] driver/mtd: Add MICRON manufacturer id in spi framework Jagan Teki
[U-Boot] Pull request: u-boot-spi/master Jagan Teki
[U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
[U-Boot] [PATCH v3 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Jagan Teki
[U-Boot] Pull request: u-boot-staging Jagan Teki
[U-Boot] [PATCH 3/3] pwm: sunxi: choose best prescaler to improve PWM resolution Jagan Teki
[U-Boot] [PATCH 0/3] Add raw read support and use it in pxa3xx NAND driver Jagan Teki
[U-Boot] [PATCH] mtd: nand: let the raw NAND devices be compiled upon selection Jagan Teki
[U-Boot] [PATCH v3 03/11] drivers: spi: cf_spi: convert to driver model Jagan Teki
[U-Boot] [PATCH 3/3] pwm: sunxi: choose best prescaler to improve PWM resolution Jagan Teki
[U-Boot] [linux-sunxi] [PATCH 1/5] sunxi: Fix typos of spelling Allwinner Jagan Teki
[U-Boot] [linux-sunxi] [PATCH 3/5] sunxi: docs: Mention CONFIG_NAND requirement Jagan Teki
[U-Boot] [linux-sunxi] [PATCH 4/5] sunxi: display: Mark sunxi_rgb2yuv_coef array as const Jagan Teki
[U-Boot] [linux-sunxi] [PATCH 5/5] sunxi: doc: Add basic fastboot example Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v2 6/6] sunxi: store DRAM size in SPL header Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v2 1/6] sunxi: disable Pine A64 model detection code on other boards Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v2 2/6] sunxi: Extend SPL header versioning Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v2 3/6] sunxi: board.c: refactor SPL header checks Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v2 4/6] sunxi: map DRAM part with 3G size Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v2 5/6] sunxi: add Kconfig option for the maximum accessible DRAM Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v2 6/6] sunxi: store DRAM size in SPL header Jagan Teki
[U-Boot] [PATCH v2 17/18] spi: mtk_qspi: add qspi driver for MT7629 SoC Jagan Teki
[U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
[U-Boot] [linux-sunxi] [PATCH] sunxi: fix build error on non-ARM64 boards Jagan Teki
[U-Boot] Pull request v2: u-boot-sunix/master Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board Jagan Teki
[U-Boot] [PATCH] spi: mxc_spi: Fix chipselect with DM_SPI in SPL Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board Jagan Teki
[U-Boot] [PATCH v2] dm: spi: prevent setting a speed of 0 Hz Jagan Teki
[U-Boot] [PATCH v2] sf: remove spi-flash chip names from SPL binary Jagan Teki
[U-Boot] [linux-sunxi] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board Jagan Teki
[U-Boot] Building U-Boot for Digilent Zybo Z7 Stefan Theil
[U-Boot] i2c: Fix pca953x endianess issue, commit daa75b34828d45b7c1d63009188d45f4a32d06ba Joakim Tjernlund
[U-Boot] i2c: Fix pca953x endianess issue, commit daa75b34828d45b7c1d63009188d45f4a32d06ba Joakim Tjernlund
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Philipp Tomsich
[U-Boot] [U-Boot, 1/4] mmc: dw_mmc: check fifo status with a timeout in fifo mode Philipp Tomsich
[U-Boot] [U-Boot, 2/4] rockchip: dwmmc: add rk2928-dw-mshc compatible Philipp Tomsich
[U-Boot] [U-Boot, 4/4] rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock Philipp Tomsich
[U-Boot] [U-Boot, 3/4] rockchip: rk3188: add u-boot-specific mmc properties Philipp Tomsich
[U-Boot] [PULL] u-boot-rockchip patch queue 2018-10-03 Philipp Tomsich
[U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Philipp Tomsich
[U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Philipp Tomsich
[U-Boot] [U-Boot, RESEND, 1/2] rockchip: make_fit_atf: use elf entry point Philipp Tomsich
[U-Boot] [U-Boot, RESEND, 2/2] rockchip: make_fit_atf: make python3 compatible Philipp Tomsich
[U-Boot] rockchip: make_fit_atf.py depends on u-boot Philipp Tomsich
[U-Boot] [PATCH v3 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs Philipp Tomsich
[U-Boot] [U-Boot, v3, 1/4] arm: dts: rockchip: add some common pin-settings to rk3399 Philipp Tomsich
[U-Boot] [U-Boot, v3, 3/4] rockchip: rk3399: Add Rock960 CE board support Philipp Tomsich
[U-Boot] [U-Boot, v3, 4/4] rockchip: rk3399: Add Ficus EE board support Philipp Tomsich
[U-Boot] [PATCH v3 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs Philipp Tomsich
[U-Boot] [PATCH] rockchip: Fix rkimage format for SPL boot over USB Philipp Tomsich
[U-Boot] [U-Boot, v4, 7/7] net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID Philipp Tomsich
[U-Boot] [U-Boot, v4, 6/7] net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmii Philipp Tomsich
[U-Boot] [U-Boot, RESENT] rockchip: make_fit_atf: fix warning unit_address_vs_reg Philipp Tomsich
[U-Boot] [U-Boot, RESEND, 1/2] rockchip: make_fit_atf: use elf entry point Philipp Tomsich
[U-Boot] [U-Boot, RESEND, 2/2] rockchip: make_fit_atf: make python3 compatible Philipp Tomsich
[U-Boot] [U-Boot, v5, 2/2] rockchip: add fit source file for pack itb with op-tee Philipp Tomsich
[U-Boot] [U-Boot, v5, 1/2] spl: add support to booting with OP-TEE Philipp Tomsich
[U-Boot] rockchip: make_fit_atf.py depends on u-boot Philipp Tomsich
[U-Boot] rockchip: Fix rkimage format for SPL boot over USB Philipp Tomsich
[U-Boot] [PULL] rockchip patch-queue 2018-10-05 Philipp Tomsich
[U-Boot] [U-Boot, 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default Philipp Tomsich
[U-Boot] [PATCH] ldpaa_eth.c: Fix warning when PHYLIB is not enabled Philipp Tomsich
[U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support Philipp Tomsich
[U-Boot] [RFQ PATCH] nand: mxs_nand: Add the option to have BBT in the nand device Michael Trimarchi
[U-Boot] [PATCH] sunxi: Fix memory 2-rank initialization for a33 cpu Michael Trimarchi
[U-Boot] [PATCH 1/4] net: dm: fec: Fix time unit error in phy-reset-duration Michael Nazzareno Trimarchi
[U-Boot] Moving MX25 to SPL Michael Nazzareno Trimarchi
[U-Boot] Moving MX25 to SPL Michael Nazzareno Trimarchi
[U-Boot] [PATCH 1/3] efi_loader: support USB boot in distro boot script Tuomas Tynkkynen
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r Tuomas Tynkkynen
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r Tuomas Tynkkynen
[U-Boot] [PATCH 2/2] ARM: qemu-arm: define fdt_addr_r Tuomas Tynkkynen
[U-Boot] [PATCH v2 3/3] ARM: qemu-arm: define fdt_addr_r Tuomas Tynkkynen
[U-Boot] [PATCH] nand: fix up badblock skipping Jiri Valek
[U-Boot] [PATCH V2 1/2] ofnode: Replace of_n_addr_cells with of_n_size_cells Marek Vasut
[U-Boot] [PATCH V2 2/2] ofnode: Add missing address translation into ofnode_get_addr_size() Marek Vasut
[U-Boot] [PATCH 2/6] pci: Check ops before using them for config space access Marek Vasut
[U-Boot] [PATCH 5/6] test: Add PCI device entry without compat string and with DT node Marek Vasut
[U-Boot] [PATCH v2] cmd: usb_mass_storage: add protection for block_dev Marek Vasut
[U-Boot] [PATCH] fs: btrfs: Fix cache alignment bugs Marek Vasut
[U-Boot] [PATCH] fs: btrfs: Fix cache alignment bugs Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Mark 4-64GiB as DRAM on Gen3 Marek Vasut
[U-Boot] [PATCH 1/2] phy: rcar: Add R-Car Gen3 PHY driver Marek Vasut
[U-Boot] [PATCH 2/2] ARM: rmobile: Enable PHY framework on Gen3 Marek Vasut
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Marek Vasut
[U-Boot] [PATCH 2/2] mmc: tmio: Limit DMA to 32bit on R-Car Gen3 Marek Vasut
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Marek Vasut
[U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage Marek Vasut
[U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A005275 Marek Vasut
[U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage Marek Vasut
[U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A005275 Marek Vasut
[U-Boot] [PATCH] bootm: Add board specific OS preboot hook Marek Vasut
[U-Boot] [PATCH] arm: imx: mx5: Make videoskip available on MX5 Marek Vasut
[U-Boot] [PATCH] arm: mx5: Add LDB clock config code Marek Vasut
[U-Boot] [PATCH] arm: mx5: Add M53Menlo board Marek Vasut
[U-Boot] [PATCH v2] arm: socfpga: stratix10: Add generic FPGA reconfig mailbox API for S10 Marek Vasut
[U-Boot] [PATCH v1 1/4] arm: socfpga: stratix10: Add macros for mailbox's arguments Marek Vasut
[U-Boot] [PATCH v1 2/4] arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver Marek Vasut
[U-Boot] [PATCH v1 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PULL] u-boot-socfpga/master Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PATCH 5/6] test: Add PCI device entry without compat string and with DT node Marek Vasut
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI Marek Vasut
[U-Boot] [PATCH 5/6] test: Add PCI device entry without compat string and with DT node Marek Vasut
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH] bootm: Add board specific OS preboot hook Marek Vasut
[U-Boot] [PATCH] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI Marek Vasut
[U-Boot] [PATCH v2] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH v2] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH] ARM: dts: rmobile: Reinstate missing CPLD on ULCB Marek Vasut
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Marek Vasut
[U-Boot] [PATCH 2/2] mmc: tmio: Limit DMA to 32bit on R-Car Gen3 Marek Vasut
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Marek Vasut
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Marek Vasut
[U-Boot] [PATCH v3] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PATCH V2] arm: mx5: Add LDB clock config code Marek Vasut
[U-Boot] [PATCH] arm: mx5: Add LDB clock config code Marek Vasut
[U-Boot] [PATCH v4] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH v4] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH v4] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH v5] arm: socfpga: fix SPL booting from fpga OnChip RAM Marek Vasut
[U-Boot] [PATCH] sunxi: Imply fitImage support Marek Vasut
[U-Boot] [PATCH 1/4] pci: Support parsing PCI controller DT subnodes Marek Vasut
[U-Boot] [PATCH 2/4] pci: Update documentation to make 'compatible' string optional Marek Vasut
[U-Boot] [PATCH 3/4] test: Add PCI device entry without compat string and with DT node Marek Vasut
[U-Boot] [PATCH 4/4] test: Add test for PCI device without compat string and with DT node Marek Vasut
[U-Boot] [PATCH] bootcount: Make bootcount magic configurable Marek Vasut
[U-Boot] [PATCH 3/3] ARM: imx6: DHCOM i.MX6 PDK: ddr init for 32bit bus and 4GBit chips Marek Vasut
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table Marek Vasut
[U-Boot] [PATCH v2] socfpga: clean up sfp generation Marek Vasut
[U-Boot] [PATCH v2] socfpga: clean up sfp generation Marek Vasut
[U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices Marek Vasut
[U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices Marek Vasut
[U-Boot] [Patch v3] socfpga: clean up sfp generation Marek Vasut
[U-Boot] [PATCH] ARM: dts: rmobile: Reinstate missing HS mode configs on Salvator-X Marek Vasut
[U-Boot] [PATCH] arm: socfpga: fpga: fix type of local variable Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Drop PRR syscon driver Marek Vasut
[U-Boot] [PATCH] ARM: dts: rmobile: Build -u-boot variants of DTs Marek Vasut
[U-Boot] [PATCH] fdt: Fix uncompress_blob() for U-Boot proper Marek Vasut
[U-Boot] [PATCH 1/9] ARM: rmobile: Fix CPGWPR Address define and Settings on Gen3 Marek Vasut
[U-Boot] [PATCH 2/9] ARM: rmobile: Remove console parameter from bootargs on Gen3 Marek Vasut
[U-Boot] [PATCH 3/9] ARM: rmobile: Remove TMU0/TMU1 settings on Gen3 Marek Vasut
[U-Boot] [PATCH 4/9] ARM: rmobile: Remove Watchdog and CPG settings on Gen3 Marek Vasut
[U-Boot] [PATCH 5/9] ARM: rmobile: salvator-x: Remove GSX clock force supply Marek Vasut
[U-Boot] [PATCH 6/9] ARM: rmobile: Tidy up SYSC_PWRx define of 3DG on Gen3 Marek Vasut
[U-Boot] [PATCH 7/9] ARM: rmobile: Enable cache command on Gen3 Marek Vasut
[U-Boot] [PATCH 8/9] ARM: rmobile: Fix module clock controls refer status on Gen3 Marek Vasut
[U-Boot] [PATCH 9/9] ARM: dts: rmobile: r8a77990: Add USB2.0(EHCI) DT nodes on Ebisu Marek Vasut
[U-Boot] [PATCH] cmd: fdt: Fix fdt address information after the movement Marek Vasut
[U-Boot] [PATCH] usb: ohci: Add OHCI PCI driver Marek Vasut
[U-Boot] socfpga cyclone5 dts Marek Vasut
[U-Boot] socfpga cyclone5 dts Marek Vasut
[U-Boot] [PULL] u-boot-sh/master Marek Vasut
[U-Boot] [PULL] u-boot-socfpga/master Marek Vasut
[U-Boot] [PATCH] usb: Do not compile USB_STORAGE with !BLK && !DM_USB Marek Vasut
[U-Boot] [PATCH] usb: Do not compile USB_STORAGE with !BLK && !DM_USB Marek Vasut
[U-Boot] [PULL] u-boot-socfpga/master Marek Vasut
[U-Boot] socfpga cyclone5 dts Marek Vasut
[U-Boot] socfpga cyclone5 dts Marek Vasut
[U-Boot] socfpga cyclone5 dts Marek Vasut
[U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init Marek Vasut
[U-Boot] socfpga cyclone5 dts Marek Vasut
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Marek Vasut
[U-Boot] [PATCH 1/3] configs: drop CMD_CACHE from mx23_olinuxino_defconfig Marek Vasut
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Marek Vasut
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Marek Vasut
[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM Marek Vasut
[U-Boot] [PATCH] arm: socfpga: imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION Marek Vasut
[U-Boot] [PATCH] arm: socfpga: check total size of SPL Marek Vasut
[U-Boot] [PATCH] arm: socfpga: check total size of SPL Marek Vasut
[U-Boot] [PATCH v1 2/3] spi: cadence_qspi: use "cdns, qspi-nor" as compatible Marek Vasut
[U-Boot] [PATCH v1 1/3] gpio: dwapb_gpio: fix binding without bank-name property Marek Vasut
[U-Boot] [PATCH v1 3/3] dts: arm: socfpga: merge gen5 devicetrees from linux Marek Vasut
[U-Boot] [PATCH v1 2/3] spi: cadence_qspi: use "cdns, qspi-nor" as compatible Marek Vasut
[U-Boot] [PATCH] arm: socfpga: check total size of SPL Marek Vasut
[U-Boot] [PATCH] pinctrl: renesas: Fix DRV register offset Marek Vasut
[U-Boot] [PATCH] clk: renesas: Allow reconfiguring SDHI clock on Gen3 Marek Vasut
[U-Boot] [PATCH] ARM: rmobile: Generate fitting mem_map on Gen3 Marek Vasut
[U-Boot] [PATCH] ARM: dts: rmobile: Add eMMC DS pinmux Marek Vasut
[U-Boot] [PATCH] ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCB Marek Vasut
[U-Boot] [PATCH 01/13] mmc: tmio: Simplify pinmux handling Marek Vasut
[U-Boot] [PATCH 02/13] mmc: tmio: Switch to clock framework Marek Vasut
[U-Boot] [PATCH 03/13] mmc: tmio: Do not set divider to 1 in DDR mode Marek Vasut
[U-Boot] [PATCH 04/13] mmc: tmio: Configure clock before any other IOS Marek Vasut
[U-Boot] [PATCH 05/13] mmc: tmio: Keep generating clock when clock are enabled Marek Vasut
[U-Boot] [PATCH 06/13] mmc: tmio: Preinitialize regulator to 3.3V Marek Vasut
[U-Boot] [PATCH 07/13] mmc: tmio: Improve error handling Marek Vasut
[U-Boot] [PATCH 08/13] mmc: tmio: Silence transfer errors when tuning Marek Vasut
[U-Boot] [PATCH 09/13] mmc: tmio: sdhi: Touch SCC only when UHS capable Marek Vasut
[U-Boot] [PATCH 10/13] mmc: tmio: sdhi: Clear HS400 settings when reseting SCC Marek Vasut
[U-Boot] [PATCH 11/13] mmc: tmio: sdhi: Implement waiting for DAT0 line state Marek Vasut
[U-Boot] [PATCH 12/13] mmc: tmio: sdhi: Switch CPG settings in UHS modes Marek Vasut
[U-Boot] [PATCH 13/13] mmc: tmio: sdhi: Merge DTCNTL access into single register write Marek Vasut
[U-Boot] [PATCH] pinctrl: renesas: Add POCCTRL handling to r8a77990 Marek Vasut
[U-Boot] [PATCH] ARM: dts: rmobile: Enable SDR modes on E3 Ebisu Marek Vasut
[U-Boot] [PULL] u-boot-socfpga/master Marek Vasut
[U-Boot] [PATCH v2] fw_setenv: avoid writing environment when nothing has changed Rasmus Villemoes
[U-Boot] [BUG] H2+/H3 : SPI driver : error: ‘AHB_GATE_OFFSET_SPI0’ undeclared (first use in this function) Arjan van Vught
[U-Boot] [PATCH 1/2] arm: K3: am654: Choose MMC boot device based on boot port Lokesh Vutla
[U-Boot] [PATCH 2/2] arm: K3: am654: Add support for getting boot mode Lokesh Vutla
[U-Boot] [PATCH v1 00/19] DM_I2C_COMPAT removal for all ti platforms Lokesh Vutla
[U-Boot] Keystone 2 sram scratch address? Lokesh Vutla
[U-Boot] [PATCH] clk: Allow clock defaults to be set also during re-reloc state Lokesh Vutla
[U-Boot] [PATCH] power: regulator: Makefile: Remove SPL tag for REGULATOR_GPIO Lokesh Vutla
[U-Boot] [PATCH 00/10] arm: am654: Add r5 support for am654-evm Lokesh Vutla
[U-Boot] [PATCH 01/10] ram: Introduce K3 AM654 DDR Sub System driver Lokesh Vutla
[U-Boot] [PATCH 02/10] armv7R: K3: am654: Enable MPU regions Lokesh Vutla
[U-Boot] [PATCH 03/10] armv7R: K3: am654: Add support for generating build targets Lokesh Vutla
[U-Boot] [PATCH 04/10] armv7R: K3: am654: Add support to start ATF from R5 SPL Lokesh Vutla
[U-Boot] [PATCH 05/10] armv7R: K3: am654: Add support for triggering ddr init from SPL Lokesh Vutla
[U-Boot] [PATCH 06/10] board: ti: am654: r5: Add initial support for am654 Lokesh Vutla
[U-Boot] [PATCH 07/10] arm: dts: k3: Sync dts from Linux Lokesh Vutla
[U-Boot] [PATCH 08/10] armv7r: dts: am654: Add initial support Lokesh Vutla
[U-Boot] [PATCH 09/10] configs: am65x_evm_r5: Add initial support Lokesh Vutla
[U-Boot] [PATCH 10/10] board: ti: am65x: Update README to add R5 build support Lokesh Vutla
[U-Boot] [PATCH v2 00/10] arm: am654: Add r5 support for am654-evm Lokesh Vutla
[U-Boot] [PATCH v2 01/10] ram: Introduce K3 AM654 DDR Sub System driver Lokesh Vutla
[U-Boot] [PATCH v2 02/10] armv7R: K3: am654: Enable MPU regions Lokesh Vutla
[U-Boot] [PATCH v2 03/10] armv7R: K3: am654: Add support for generating build targets Lokesh Vutla
[U-Boot] [PATCH v2 04/10] armv7R: K3: am654: Add support to start ATF from R5 SPL Lokesh Vutla
[U-Boot] [PATCH v2 05/10] armv7R: K3: am654: Add support for triggering ddr init from SPL Lokesh Vutla
[U-Boot] [PATCH v2 06/10] board: ti: am654: r5: Add initial support for am654 Lokesh Vutla
[U-Boot] [PATCH v2 07/10] arm: dts: k3: Sync dts from Linux Lokesh Vutla
[U-Boot] [PATCH v2 08/10] armv7r: dts: am654: Add initial support Lokesh Vutla
[U-Boot] [PATCH v2 09/10] configs: am65x_evm_r5: Add initial support Lokesh Vutla
[U-Boot] [PATCH v2 10/10] board: ti: am65x: Update README to add R5 build support Lokesh Vutla
[U-Boot] [PATCH] power: regulator: Makefile: Remove SPL tag for REGULATOR_GPIO Lokesh Vutla
[U-Boot] [PATCH] cmd: remoteproc: Fix the base of strtoul for ID conversion from 3 to 10 Lokesh Vutla
[U-Boot] [PATCH] power: spl: add SPL_DM_REGULATOR_GPIO in Kconfig Lokesh Vutla
[U-Boot] [PATCH v3 00/10] arm: am654: Add r5 support for am654-evm Lokesh Vutla
[U-Boot] [PATCH v3 01/10] ram: Introduce K3 AM654 DDR Sub System driver Lokesh Vutla
[U-Boot] [PATCH v3 02/10] armv7R: K3: am654: Enable MPU regions Lokesh Vutla
[U-Boot] [PATCH v3 03/10] armv7R: K3: am654: Add support for generating build targets Lokesh Vutla
[U-Boot] [PATCH v3 04/10] armv7R: K3: am654: Add support to start ATF from R5 SPL Lokesh Vutla
[U-Boot] [PATCH v3 05/10] armv7R: K3: am654: Add support for triggering ddr init from SPL Lokesh Vutla
[U-Boot] [PATCH v3 06/10] board: ti: am654: r5: Add initial support for am654 Lokesh Vutla
[U-Boot] [PATCH v3 07/10] arm: dts: k3: Sync dts from Linux Lokesh Vutla
[U-Boot] [PATCH v3 08/10] armv7r: dts: am654: Add initial support Lokesh Vutla
[U-Boot] [PATCH v3 09/10] configs: am65x_evm_r5: Add initial support Lokesh Vutla
[U-Boot] [PATCH v3 10/10] board: ti: am65x: Update README to add R5 build support Lokesh Vutla
[U-Boot] [PATCH] clk: Add support for Arm's Versatile Express OSC clock generators Linus Walleij
[U-Boot] clk: Add support for Arm's Versatile Express OSC clock generators Linus Walleij
[U-Boot] [PATCH 4/5] arm: remove prototype for get_timer_masked Linus Walleij
[U-Boot] [PATCH 1/5] ARM: vexpress-ca9x4_defconfig: Enable CMD_UBI support Linus Walleij
[U-Boot] [PATCH] arm: ls1021a: Add timer_init() in board_init_f for SPL Alison Wang
[U-Boot] Regression: vf610twr build error Alison Wang
[U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A005275 Ran Wang
[U-Boot] [PATCH 14/22] test/py: Add a way to pass flags to sandbox Stephen Warren
[U-Boot] [PATCH] Revert "test/py: Import 'configparser' lower case to be python 3.x safe" Stephen Warren
[U-Boot] [PATCH v2 01/17] test/py: ignore console read exceptions after test failure Stephen Warren
[U-Boot] [PATCH V2] test/py: ignore console read exceptions after test failure Stephen Warren
[U-Boot] Please pull u-boot-dm Stephen Warren
[U-Boot] Please pull u-boot-dm Stephen Warren
[U-Boot] Please pull u-boot-dm Stephen Warren
[U-Boot] Please pull u-boot-dm Stephen Warren
[U-Boot] [PATCH 00/13] dm: DM_FLAG_PRE_RELOC flag clean up Stephen Warren
[U-Boot] [RFC] efi: workaround for SCT (against unicode collation protocol) Dong Wei
[U-Boot] [PATCH v2] socfpga: clean up sfp generation Dalon Westergreen
[U-Boot] [PATCH v2] socfpga: clean up sfp generation Westergreen, Dalon
[U-Boot] [Patch v3] socfpga: clean up sfp generation Dalon Westergreen
[U-Boot] socfpga cyclone5 dts Dalon L Westergreen
[U-Boot] "Kbuild:43: recipe for target 'lib/asm-offsets.s' failed" R White
[U-Boot] "Kbuild:43: recipe for target 'lib/asm-offsets.s' failed" R White
[U-Boot] [PATCH v4 00/19] AVB using OP-TEE Jens Wiklander
[U-Boot] [PATCH] test: tee: fix resource leak in dm_test_tee() Jens Wiklander
[U-Boot] [PATCH] add default-option to bootmenu Frank Wunderlich
[U-Boot] MT76XX-driver Frank Wunderlich
[U-Boot] [question] need help with mmc-env-addr Frank Wunderlich
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Masahiro Yamada
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Masahiro Yamada
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Masahiro Yamada
[U-Boot] [PATCH 1/2] mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable() Masahiro Yamada
[U-Boot] Question about booting Linux from efi_loader Masahiro Yamada
[U-Boot] Question about booting Linux from efi_loader Masahiro Yamada
[U-Boot] Rockchip RV1108 eMMC support not working Andy Yan
[U-Boot] Rockchip RV1108 eMMC support not working Andy Yan
[U-Boot] [PATCH] image-fdt: reserve lmb for fdt Andy Yan
[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver Kever Yang
[U-Boot] [PATCH 00/22] spl: Add features for passing info from SPL to U-Boot proper Kever Yang
[U-Boot] [PATCH v2 03/23] Add core support for a bloblist to convey data from SPL Kever Yang
[U-Boot] [PATCH 1/2] watchdog: driver support for fsl-lsch2 Xiaoliang Yang
[U-Boot] [PATCH 2/2] watchdog: imx: add config to disable wdog reset Xiaoliang Yang
[U-Boot] [PATCH 1/2] watchdog: driver support for fsl-lsch2 Xiaoliang Yang
[U-Boot] [PATCH] Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig Xiaoliang Yang
[U-Boot] [PATCH v2 1/2] watchdog: driver support for fsl-lsch2 Xiaoliang Yang
[U-Boot] [PATCH v2 2/2] watchdog: imx: add config to disable wdog reset Xiaoliang Yang
[U-Boot] [PATCH] Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig Xiaoliang Yang
[U-Boot] [PATCH] mtd: nand: lpc32xx mlc: predefine number of NAND chips to support Vladimir Zapolskiy
[U-Boot] [PATCH] mtd: nand: lpc32xx slc: disable DMA support in SPL builds Vladimir Zapolskiy
[U-Boot] [PATCH 0/2] arm: lpc32xx: create platform specific Kconfig file Vladimir Zapolskiy
[U-Boot] [PATCH] mtd: nand: lpc32xx mlc: predefine number of NAND chips to support Vladimir Zapolskiy
[U-Boot] [PATCH] mtd: nand: lpc32xx slc: disable DMA support in SPL builds Vladimir Zapolskiy
[U-Boot] [PATCH 3/3] ARM: imx6: DHCOM i.MX6 PDK: ddr init for 32bit bus and 4GBit chips Ludwig Zenz
[U-Boot] [PATCH 5/5] sunxi: add support for Pinebook Icenowy Zheng
[U-Boot] [PATCH] sunxi: fix DRAM gate/reset sequence of H6 Icenowy Zheng
[U-Boot] [linux-sunxi] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size Icenowy Zheng
[U-Boot] [linux-sunxi] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size Icenowy Zheng
[U-Boot] [PATCH v2 0/6] sunxi: extend SPL header to propagate DRAM size and H6 3GiB DRAM support Icenowy Zheng
[U-Boot] [PATCH v2 1/6] sunxi: disable Pine A64 model detection code on other boards Icenowy Zheng
[U-Boot] [PATCH v2 2/6] sunxi: Extend SPL header versioning Icenowy Zheng
[U-Boot] [PATCH v2 3/6] sunxi: board.c: refactor SPL header checks Icenowy Zheng
[U-Boot] [PATCH v2 4/6] sunxi: map DRAM part with 3G size Icenowy Zheng
[U-Boot] [PATCH v2 5/6] sunxi: add Kconfig option for the maximum accessible DRAM Icenowy Zheng
[U-Boot] [PATCH v2 6/6] sunxi: store DRAM size in SPL header Icenowy Zheng
[U-Boot] [PATCH v2 0/6] sunxi: extend SPL header to propagate DRAM size and H6 3GiB DRAM support Icenowy Zheng
[U-Boot] [PATCH v2 0/6] sunxi: extend SPL header to propagate DRAM size and H6 3GiB DRAM support Icenowy Zheng
[U-Boot] [linux-sunxi] [PATCH v2 6/6] sunxi: store DRAM size in SPL header Icenowy Zheng
[U-Boot] [PATCH] sunxi: fix build error on non-ARM64 boards Icenowy Zheng
[U-Boot] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board Icenowy Zheng
[U-Boot] [PATCH] sunxi: lower the DDR frequency of Orange Pi Prime Icenowy Zheng
[U-Boot] [linux-sunxi] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board Icenowy Zheng
[U-Boot] [linux-sunxi] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board Icenowy Zheng
[U-Boot] [PATCH v1] armv8: lx2160a: add eSDHC nodes Yinbo Zhu
[U-Boot] [PATCH v1] armv8: lx2160a: add some minor fixes on esdhc node Yinbo Zhu
[U-Boot] [PATCH v1] configs: lx2160a: enable driver model for eSDHC Yinbo Zhu
[U-Boot] [PATCH v2] armv8: lx2160a: add eSDHC nodes Yinbo Zhu
[U-Boot] [PATCH v2 1/2] imx: mx7: fix potential overflow in imx_ddr_size() Marcel Ziswiler
[U-Boot] [PATCH v2 2/2] colibri_imx7: prime get_ram_size() using imx_ddr_size() Marcel Ziswiler
[U-Boot] [RESEND PATCH v2 1/2] imx: mx7: fix potential overflow in imx_ddr_size() Marcel Ziswiler
[U-Boot] [RESEND PATCH v2 2/2] colibri_imx7: prime get_ram_size() using imx_ddr_size() Marcel Ziswiler
[U-Boot] [RESEND PATCH v2 1/2] imx: mx7: fix potential overflow in imx_ddr_size() Marcel Ziswiler
[U-Boot] [RESEND PATCH v2 1/2] imx: mx7: fix potential overflow in imx_ddr_size() Marcel Ziswiler
[U-Boot] Uboot send pull request uboot at andestech.com
[U-Boot] MTD combine/merge flash bank like linux : MPC83xx / u-boot v2016.03 asebt69
[U-Boot] [PATCH] imx: imx6: perform gpr_init only on suitable cpu types cniedermaier at dh-electronics.de
[U-Boot] [PATCH] mmc: dw_mmc: fix dwmci_data_transfer not filling data buffer paweljarosz3691 at gmail.com
[U-Boot] socfpga cyclone5 dts goldsimon at gmx.de
[U-Boot] [PATCH V2 2/2] ofnode: Add missing address translation into ofnode_get_addr_size() sjg at google.com
[U-Boot] [PATCH V2 1/2] ofnode: Replace of_n_addr_cells with of_n_size_cells sjg at google.com
[U-Boot] [PATCH 15/15] sandbox: Restore blocking I/O on exit sjg at google.com
[U-Boot] [PATCH 13/15] sandbox: tpm: Enhance to support the latest Chromium OS sjg at google.com
[U-Boot] [PATCH 14/15] dm: spi: Clean up detection of sandbox SPI emulator sjg at google.com
[U-Boot] [PATCH 12/15] sandbox: tpm: Tidy up enums and return values sjg at google.com
[U-Boot] [PATCH 11/15] serial: sandbox: Allow serial output without device tree sjg at google.com
[U-Boot] [PATCH 10/15] sandbox: Add a debug UART sjg at google.com
[U-Boot] [PATCH 08/15] sandbox: spi: Add more logging sjg at google.com
[U-Boot] [PATCH 09/15] sandbox: video: Speed up video output sjg at google.com
[U-Boot] [PATCH 07/15] sandbox: Remove the old memory file later sjg at google.com
[U-Boot] [PATCH 05/15] sandbox: Support booting from TPL to SPL sjg at google.com
[U-Boot] [PATCH 06/15] sandbox: Add a flag to set the default log level sjg at google.com
[U-Boot] [PATCH 04/15] sandbox: spi: Drop command-line SPI option sjg at google.com
[U-Boot] [PATCH 03/15] sandbox: Add a way to write data to the host filesystem sjg at google.com
[U-Boot] [PATCH 02/15] sandbox: Support file truncation with os_open() sjg at google.com
[U-Boot] [PATCH 01/15] log: Add helpers for common log levels sjg at google.com
[U-Boot] [PATCH 45/45] dtoc: Fix the value of SetInt() sjg at google.com
[U-Boot] [PATCH 44/45] video: Tidy up a few comments in video.o sjg at google.com
[U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos sjg at google.com
[U-Boot] [PATCH 42/45] sysreset: Add a way to find the last reset sjg at google.com
[U-Boot] [PATCH 40/45] pci: Add a little more debugging to pci_rom sjg at google.com
[U-Boot] [PATCH 41/45] sysreset: Tidy up a few comments and logging sjg at google.com
[U-Boot] [PATCH 39/45] fdt: Allow C++ comments in link scripts and DT files sjg at google.com
[U-Boot] [PATCH 38/45] ctags: Minor changes to fix ctags output sjg at google.com
[U-Boot] [PATCH 36/45] test: panel: Add a test for the panel uclass sjg at google.com
[U-Boot] [PATCH 37/45] panel: Expand the backlight support sjg at google.com
[U-Boot] [PATCH 35/45] cros_ec: Add support for v3 messages on LPC sjg at google.com
[U-Boot] [PATCH 34/45] cros_ec: Update cros_ec_read_hash() to specify the image sjg at google.com
[U-Boot] [PATCH 33/45] x86: Update mtrr functions to allow leaving cache alone sjg at google.com
[U-Boot] [PATCH 32/45] cros: Update ec_commands to latest version sjg at google.com
[U-Boot] [PATCH 31/45] Rename GPT_HEADER_SIGNATURE to avoid conflict sjg at google.com
[U-Boot] [PATCH 30/45] Add a header file for strings sjg at google.com
[U-Boot] [PATCH 29/45] malloc_simple: Add logging of allocations sjg at google.com
[U-Boot] [PATCH 28/45] log: Add comments to the rest of the log categories sjg at google.com
[U-Boot] [PATCH 27/45] binman: Add a test for Intel reference code sjg at google.com
[U-Boot] [PATCH 26/45] binman: Move to three-digit test-file numbers sjg at google.com
[U-Boot] [PATCH 25/45] tpm: Add a few new commands for v1 sjg at google.com
[U-Boot] [PATCH 24/45] tpm: Tidy up logging in tpm-common.c sjg at google.com
[U-Boot] [PATCH 23/45] tpm: Use livetree and allow children sjg at google.com
[U-Boot] [PATCH 22/45] video: Adjust video_clear() to return an error sjg at google.com
[U-Boot] [PATCH 21/45] fdt: Remove fdtdec_decode_region() function sjg at google.com
[U-Boot] [PATCH 20/45] dm: spi: Add logging of some return values sjg at google.com
[U-Boot] [PATCH 19/45] cros: Adjust board_get_cros_ec_dev() to return a udevice sjg at google.com
[U-Boot] [PATCH 18/45] cros: Update cros_ec code to use struct udevice sjg at google.com
[U-Boot] [PATCH 17/45] fdt: Allow libfdt in TPL sjg at google.com
[U-Boot] [PATCH 16/45] serial: Allow serial to be absent in TPL sjg at google.com
[U-Boot] [PATCH 15/45] tpm: Add support for SPL and TPL sjg at google.com
[U-Boot] [PATCH 14/45] fdt: Allow indicating a node is for U-Boot proper only sjg at google.com
[U-Boot] [PATCH 13/45] doc: Update docs for device tree in SPL, TPL sjg at google.com
[U-Boot] [PATCH 12/45] fdt: Document the fact that dtc is now built sjg at google.com
[U-Boot] [PATCH 11/45] rtc: Allow use of RTC in SPL and TPL sjg at google.com
[U-Boot] [PATCH 10/45] Kconfig: Convert CONFIG_RTC_MC146818 to Kconfig sjg at google.com
[U-Boot] [PATCH 09/45] blk: Support block drivers in TPL sjg at google.com
[U-Boot] [PATCH 08/45] spl: misc: Allow misc drivers in SPL and TPL sjg at google.com
[U-Boot] [PATCH 07/45] Makefile: Add a warning if SPL/TPL cannot be built sjg at google.com
[U-Boot] [PATCH 06/45] spl: input: Allow input in SPL and TPL sjg at google.com
[U-Boot] [PATCH 05/45] sf: Avoid allocating memory on every read operation sjg at google.com
[U-Boot] [PATCH 04/45] dm: core: Update ofnode to read binman-style flash entry sjg at google.com
[U-Boot] [PATCH 03/45] dm: core: Add a function to find the first inactive child sjg at google.com
[U-Boot] [PATCH 02/45] dm: core: Update some functions to use const sjg at google.com
[U-Boot] [PATCH 01/45] dm: core: Alloc uclass-private data to be cache-aligned sjg at google.com
[U-Boot] [PATCH v2 17/17] binman: Run tests concurrently sjg at google.com
[U-Boot] [PATCH v2 16/17] test: Reduce the number of tests run with sandbox_flattree sjg at google.com
[U-Boot] [PATCH v2 15/17] patman: Don't clear progress in tout unless it was used sjg at google.com
[U-Boot] [PATCH v2 14/17] tools: Set an initial value for indir sjg at google.com
[U-Boot] [PATCH v2 13/17] buildman: dtoc: Suppress unwanted output from test sjg at google.com
[U-Boot] [PATCH v2 12/17] binman: Separate out testSplBssPad() sjg at google.com
[U-Boot] [PATCH v2 11/17] binman: Fix up removal of temporary directories sjg at google.com
[U-Boot] [PATCH v2 10/17] binman: Add a default path to libfdt.py sjg at google.com
[U-Boot] [PATCH v2 09/17] test: Tidy up comments and variable name sjg at google.com
[U-Boot] [PATCH v2 08/17] test: Print the name of each test before running it sjg at google.com
[U-Boot] [PATCH v2 07/17] test: Simplify the PATH setup sjg at google.com
[U-Boot] [PATCH v2 06/17] Makefile: Add a 'check' target for make sjg at google.com
[U-Boot] [PATCH v2 05/17] buildman: Make the toolchain test more forgiving sjg at google.com
[U-Boot] [PATCH v2 04/17] test/py: Fix unicode handling for log filtering sjg at google.com
[U-Boot] [PATCH v2 03/17] patman: Handle unicode in _ProjectConfigParser tests sjg at google.com
[U-Boot] [PATCH v2 02/17] sandbox: Unprotect DATA regions in bus tests sjg at google.com
[U-Boot] [PATCH v2 01/17] test/py: ignore console read exceptions after test failure sjg at google.com
[U-Boot] [PATCH v3 8/8] timer: Sort Kconfig driver entries sjg at google.com
[U-Boot] [PATCH v3 7/8] test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flag sjg at google.com
[U-Boot] [PATCH v3 6/8] dm: core: Mirror the chosen node parse logic in the livetree scanning sjg at google.com
[U-Boot] [PATCH v3 5/8] dm: Correct pre_reloc_only parameter description in several APIs' comments sjg at google.com
[U-Boot] [PATCH v3 4/8] dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt() sjg at google.com
[U-Boot] [PATCH v3 3/8] dm: util: Add a livetree equivalent API of dm_fdt_pre_reloc() sjg at google.com
[U-Boot] [PATCH v3 2/8] cpu: mpc83xx: Remove unnecessary characters in the description string sjg at google.com
[U-Boot] [PATCH v3 1/8] dm: cpu: Fix print_cpuinfo() output sjg at google.com
[U-Boot] [PATCH v11 16/16] misc: Add IHS FPGA driver sjg at google.com
[U-Boot] [PATCH v11 15/16] misc: Add gdsys_soc driver sjg at google.com
[U-Boot] [PATCH v11 14/16] misc: Sort Makefile entries sjg at google.com
[U-Boot] [PATCH v11 04/16] regmap: Improve error handling sjg at google.com
[U-Boot] [PATCH v11 03/16] regmap: Add documentation sjg at google.com
[U-Boot] [PATCH v11 02/16] regmap: Fix documentation sjg at google.com
[U-Boot] [PATCH v11 01/16] test: regmap: Increase size of syscon0 memory sjg at google.com
[U-Boot] [PATCH] core: ofnode: Fix mem leak in error path sjg at google.com
[U-Boot] [PATCH v3 31/31] doc: Document virtio support sjg at google.com
[U-Boot] [PATCH v3 30/31] test: dm: virtio: Add test cases for virtio uclass sjg at google.com
[U-Boot] [PATCH v3 29/31] virtio: Add a Sandbox transport driver sjg at google.com
[U-Boot] [PATCH v3 28/31] virtio: net: Support non-legacy device sjg at google.com
[U-Boot] [PATCH v3 27/31] virtio: pci: Support non-legacy PCI transport device sjg at google.com
[U-Boot] [PATCH v3 26/31] test: dm: pci: Add cases for finding next PCI capability APIs sjg at google.com
[U-Boot] [PATCH v3 25/31] dm: pci: Add APIs to find next capability and extended capability sjg at google.com
[U-Boot] [PATCH v3 24/31] x86: qemu: Imply virtio PCI transport and device drivers sjg at google.com
[U-Boot] [PATCH v3 23/31] arm: qemu: Enumerate virtio bus during early boot sjg at google.com
[U-Boot] [PATCH v3 22/31] arm: qemu: Add a Kconfig in the board directory sjg at google.com
[U-Boot] [PATCH v3 21/31] virtio: Add virtio over pci transport driver sjg at google.com
[U-Boot] [PATCH v3 20/31] x86: Implement arch-specific io accessor routines sjg at google.com
[U-Boot] [PATCH v3 19/31] kconfig: Introduce HAVE_ARCH_IOMAP sjg at google.com
[U-Boot] [PATCH v3 18/31] riscv: qemu: Include some useful commands sjg at google.com
[U-Boot] [PATCH v3 17/31] riscv: qemu: Enumerate virtio bus during early boot sjg at google.com
[U-Boot] [PATCH v3 16/31] virtio: cmd: Add virtio command for virtio devices sjg at google.com
[U-Boot] [PATCH v3 15/31] virtio: Add block driver support sjg at google.com
[U-Boot] [PATCH v3 14/31] blk: Introduce IF_TYPE_VIRTIO sjg at google.com
[U-Boot] [PATCH v3 13/31] blk: Make blk_next_free_devnum() public sjg at google.com
[U-Boot] [PATCH v3 12/31] blk: Drop blk_prepare_device() sjg at google.com
[U-Boot] [PATCH v3 11/31] blk: Call part_init() in the post_probe() method sjg at google.com
[U-Boot] [PATCH v3 10/31] efi_driver: blk: Switch to use platdata_auto_alloc_size for the driver data sjg at google.com
[U-Boot] [PATCH v3 09/31] sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data sjg at google.com
[U-Boot] [PATCH v3 08/31] test: dm: blk: Correct blk_base test case sjg at google.com
[U-Boot] [PATCH v3 07/31] virtio: Add net driver support sjg at google.com
[U-Boot] [PATCH v3 06/31] virtio: Add virtio over mmio transport driver sjg at google.com
[U-Boot] [PATCH v3 05/31] virtio: Add codes for virtual queue/ring management sjg at google.com
[U-Boot] [PATCH v3 04/31] dm: Add a new uclass driver for VirtIO transport devices sjg at google.com
[U-Boot] [PATCH v3 03/31] riscv: bootm: Add dm_remove_devices_flags() call to do_bootm_linux() sjg at google.com
[U-Boot] [PATCH v3 02/31] test: dm: core: Add test case for uclass driver's child_post_probe() sjg at google.com
[U-Boot] [PATCH v3 01/31] dm: core: Allow uclass to set up a device's child after it is probed sjg at google.com
[U-Boot] [PATCH v2] uclass: Use uclass_foreach_dev() macro instead of open coding sjg at google.com
[U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init sjg at google.com
[U-Boot] [PATCH v11 13/16] regmap: Add overview documentation sjg at google.com
[U-Boot] [PATCH v11 12/16] regmap: Add endianness support sjg at google.com
[U-Boot] [PATCH v11 11/16] test: regmap: Add test for regmap_{set, get} sjg at google.com
[U-Boot] [PATCH v11 10/16] regmap: Define regmap_{get,set} sjg at google.com
[U-Boot] [PATCH v11 09/16] regmap: Support reading from specific range sjg at google.com
[U-Boot] [PATCH v11 08/16] regmap: Add raw read/write functions sjg at google.com
[U-Boot] [PATCH v11 06/16] regmap: Add error output sjg at google.com
[U-Boot] [PATCH v11 05/16] regmap: Introduce init_range sjg at google.com
[U-Boot] [PATCH v2] Add generic FPGA reconfig mailbox API for S10 chee.hong.ang at intel.com
[U-Boot] [PATCH v2] arm: socfpga: stratix10: Add generic FPGA reconfig mailbox API for S10 chee.hong.ang at intel.com
[U-Boot] [PATCH v1 0/4] Stratix10 FPGA reconfiguration support chee.hong.ang at intel.com
[U-Boot] [PATCH v1 1/4] arm: socfpga: stratix10: Add macros for mailbox's arguments chee.hong.ang at intel.com
[U-Boot] [PATCH v1 2/4] arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver chee.hong.ang at intel.com
[U-Boot] [PATCH v1 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table chee.hong.ang at intel.com
[U-Boot] [PATCH v1 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration chee.hong.ang at intel.com
[U-Boot] [PATCH v2 0/4] Stratix10 FPGA reconfiguration support chee.hong.ang at intel.com
[U-Boot] [PATCH v2 1/4] arm: socfpga: stratix10: Add macros for mailbox's arguments chee.hong.ang at intel.com
[U-Boot] [PATCH v2 2/4] arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver chee.hong.ang at intel.com
[U-Boot] [PATCH v2 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table chee.hong.ang at intel.com
[U-Boot] [PATCH v2 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration chee.hong.ang at intel.com
[U-Boot] [PATCH v3 0/4] Stratix10 FPGA reconfiguration support chee.hong.ang at intel.com
[U-Boot] [PATCH v3 1/4] arm: socfpga: stratix10: Add macros for mailbox's arguments chee.hong.ang at intel.com
[U-Boot] [PATCH v3 2/4] arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver chee.hong.ang at intel.com
[U-Boot] [PATCH v3 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table chee.hong.ang at intel.com
[U-Boot] [PATCH v3 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration chee.hong.ang at intel.com
[U-Boot] [PATCH] configs: sama5d2_ptc_ek: read environment from FAT Andrei.Stefanescu at microchip.com
[U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos Eugen.Hristev at microchip.com
[U-Boot] [PATCH] w1-eeprom: ds24xxx: fix data abort in ds24xxx_probe() Eugen.Hristev at microchip.com
[U-Boot] [PATCH] w1: fix data abort if no one wire bus master present Eugen.Hristev at microchip.com
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM Eugen.Hristev at microchip.com
[U-Boot] [PATCH] configs: at91: at91sam9x5ek: fix bootcmd for NAND flash Eugen.Hristev at microchip.com
[U-Boot] [RFC][PATCH] ARM: at91: lds: add test SPL binary size and bbs size Eugen.Hristev at microchip.com
[U-Boot] [PATCH] w1: fix data abort if no one wire bus master present Eugen.Hristev at microchip.com
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM Eugen.Hristev at microchip.com
[U-Boot] [PATCH] configs: sama5d2_ptc_ek: read environment from FAT Eugen.Hristev at microchip.com
[U-Boot] [PATCH] w1: fix build without CONFIG_W1_EEPROM Eugen.Hristev at microchip.com
[U-Boot] Compile error with CONFIG_MULTI_DTB_FIT and not SPL Lars.Povlsen at microchip.com
[U-Boot] U-boot does not silence its output mrigendra
[U-Boot] [PATCH] pxe: Try even board specific boot michal.hrusecky at nic.cz
[U-Boot] [PPC] Internet connection on qemu-ppce500 vnktux
[U-Boot] [PATCH v2 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Jernej Škrabec
[U-Boot] [PATCH v2 5/5] sunxi: DT: add support for Pinebook Jernej Škrabec
[U-Boot] [PATCH] arm: mvebu: Move PCI(e) MBUS window to end of RAM Владислав
[U-Boot] [PATCH] arm: mvebu: Move PCI(e) MBUS window to end of RAM Владислав

Last message date: Wed Oct 31 21:33:14 UTC 2018
Archived on: Wed Oct 31 21:33:19 UTC 2018

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).