[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM

Simon Goldschmidt simon.k.r.goldschmidt at gmail.com
Tue Oct 30 09:07:58 UTC 2018


Stefan Roese <sr at denx.de> schrieb am Di., 30. Okt. 2018, 10:00:

> Commit 768f23dc8ae3 ("ARM: socfpga: Put stack at the end of SRAM") broke
> those socfpga boards that keep the bootcounter at the end of the
> internal SRAM as the bootcounter needs 8 bytes by default and thus the
> very first SPL call to board_init_f_alloc_reserve overwrites the
> bootcounter.
>
> This patch allows to move the initial stack pointer down a bit by
> checking if CONFIG_SYS_BOOTCOUNT_ADDR is located in the internal SRAM
> area and then using this address as location for the start of the
> stack pointer.
>
> No new macros / defines are added by this approach.
>

Ok, so no new macros are defined, but this is limited to the boot counter.
However, I need to store additional data that survives a reboot somewhere,
so I think an explicit range reservation would be nicer.

I could still do what I want with your patch by allocating my data above
the bootcounter, but this works in a more or less implicit/hidden way, not
explicitly configured...

Simon


> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> ---
>  include/configs/socfpga_common.h | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h
> index 2330143cf1..bd8f5c8c41 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -31,8 +31,21 @@
>  #define CONFIG_SYS_INIT_RAM_ADDR       0xFFE00000
>  #define CONFIG_SYS_INIT_RAM_SIZE       0x40000 /* 256KB */
>  #endif
> +
> +/*
> + * Some boards (e.g. socfpga_sr1500) use 8 bytes at the end of the
> internal
> + * SRAM as bootcounter storage. Make sure to not put the stack directly
> + * at this address to not overwrite the bootcounter by checking, if the
> + * bootcounter address is located in the internal SRAM.
> + */
> +#if ((CONFIG_SYS_BOOTCOUNT_ADDR > CONFIG_SYS_INIT_RAM_ADDR) && \
> +     (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR +  \
> +                                  CONFIG_SYS_INIT_RAM_SIZE)))
> +#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_BOOTCOUNT_ADDR
> +#else
>  #define CONFIG_SYS_INIT_SP_ADDR                        \
>         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
> +#endif
>
>  #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
>
> --
> 2.19.1
>
>


More information about the U-Boot mailing list