[U-Boot] [PATCH] mtd: nand: let the raw NAND devices be compiled upon selection

[Miquel Raynal]

Hi Jagan,

Jagan Teki <jagan at amarulasolutions.com> wrote on Tue, 23 Oct 2018
16:40:05 +0530:

> On Thu, Oct 11, 2018 at 3:05 PM Miquel Raynal <miquel.raynal at bootlin.com> wrote:
> >
> > Today way is to rely on CMD_NAND to be selected and from the root
> > Makefile compile what is in drivers/mtd/nand/raw.
> >
> > While this will work most of the time with decent configurations, it
> > is better to also compile this subsystem upon simple request in the
> > configuration. Otherwise, a user not selecting CMD_NAND but selecting
> > NAND and any of the controller drivers will not see their build. Fix
> > this weird situation by adding a single line in the nand/ directory
> > Kconfig file.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> > ---
> >  drivers/mtd/nand/Makefile | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> > index a358bc680e..2c33447995 100644
> > --- a/drivers/mtd/nand/Makefile
> > +++ b/drivers/mtd/nand/Makefile
> > @@ -2,4 +2,5 @@
> >
> >  nandcore-objs := core.o bbt.o
> >  obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
> > +obj-$(CONFIG_NAND) += raw/  
> 
> But we even source raw Kconfig path, isn't it? and also how about
> remove this from root Makefile?

What do you mean by "we even source raw Kconfig path"? It was not
sourced before this modification unless CMD_NAND was selected.

I agree we should also remove this link between a path being
compiled and a CMD_* symbol in the root Makefile. It will probably
produce a lot of errors though. I'll try when I'll have some time.


Thanks,
Miquèl