[U-Boot] [PATCH] mtd: nand: let the raw NAND devices be compiled upon selection

[Jagan Teki]

On Thu, Oct 11, 2018 at 3:05 PM Miquel Raynal <miquel.raynal at bootlin.com> wrote:
>
> Today way is to rely on CMD_NAND to be selected and from the root
> Makefile compile what is in drivers/mtd/nand/raw.
>
> While this will work most of the time with decent configurations, it
> is better to also compile this subsystem upon simple request in the
> configuration. Otherwise, a user not selecting CMD_NAND but selecting
> NAND and any of the controller drivers will not see their build. Fix
> this weird situation by adding a single line in the nand/ directory
> Kconfig file.
>
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  drivers/mtd/nand/Makefile | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index a358bc680e..2c33447995 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -2,4 +2,5 @@
>
>  nandcore-objs := core.o bbt.o
>  obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
> +obj-$(CONFIG_NAND) += raw/

But we even source raw Kconfig path, isn't it? and also how about
remove this from root Makefile?