[U-Boot] [PATCH] board/freescale/vid: Add correction for ltc3882 read error.

[Priyanka Jain]

Voltage regulator LTC3882 device has 0.5% voltage read error.
So for NXP SoC devices this generally equates to 2mV

Update set_voltage_to_LTC for below:
1.Add coorection of upto 2mV in voltage comparison
  to take care of voltage read error of voltage regulator
2.Add loop max count kept as 100 to avoid infinte loop.

Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
 board/freescale/common/vid.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index eb5cf88..db158cb 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -318,6 +318,7 @@ static int set_voltage_to_IR(int i2caddress, int vdd)
 static int set_voltage_to_LTC(int i2caddress, int vdd)
 {
 	int ret, vdd_last, vdd_target = vdd;
+	int count = 100, temp = 0;
 
 	/* Scale up to the LTC resolution is 1/4096V */
 	vdd = (vdd * 4096) / 1000;
@@ -343,7 +344,9 @@ static int set_voltage_to_LTC(int i2caddress, int vdd)
 			printf("VID: Couldn't read sensor abort VID adjust\n");
 			return -1;
 		}
-	} while (vdd_last != vdd_target);
+		count--;
+		temp = vdd_last - vdd_target;
+	} while ((abs(temp) > 2)  && (count > 0));
 
 	return vdd_last;
 }
-- 
1.9.1