[U-Boot] [PATCH] ARM: dts: fsl-imx8qxp-mek: Move regulator outside "simple-bus"
Fabio Estevam
festevam at gmail.com
Fri Oct 26 00:49:31 UTC 2018
Commit 3c28576bb0f0 ("arm: dts: imx8qxp: fix build warining")
fixed the dts warning by removing the unnecessary
#address-cells/#size-cells, but the recommendation for regulators is not
to place them under "simple-bus", so move the reg_usdhc2_vmmc regulator
accordingly.
Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
arch/arm/dts/fsl-imx8qxp-mek.dts | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/arch/arm/dts/fsl-imx8qxp-mek.dts b/arch/arm/dts/fsl-imx8qxp-mek.dts
index c14e184..adab494 100644
--- a/arch/arm/dts/fsl-imx8qxp-mek.dts
+++ b/arch/arm/dts/fsl-imx8qxp-mek.dts
@@ -16,18 +16,14 @@
stdout-path = &lpuart0;
};
- regulators {
- compatible = "simple-bus";
-
- reg_usdhc2_vmmc: usdhc2-vmmc {
- compatible = "regulator-fixed";
- regulator-name = "SD1_SPWR";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
- off-on-delay = <3480>;
- enable-active-high;
- };
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+ off-on-delay = <3480>;
+ enable-active-high;
};
};
--
2.7.4
More information about the U-Boot
mailing list