[U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT

[Rajesh Bhagat]

> -----Original Message-----
> From: York Sun
> Sent: Wednesday, October 3, 2018 9:59 PM
> To: Rajesh Bhagat <rajesh.bhagat at nxp.com>; u-boot at lists.denx.de
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>; Pankit Garg
> <pankit.garg at nxp.com>
> Subject: Re: [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for
> TFABOOT
> 
> On 10/03/2018 04:39 AM, Rajesh Bhagat wrote:
> > Defines BOOTCOMMAND for TFABOOT configuration for supported boot
> > sources.
> 
> Please keep the commit message format consistent, to wrap back at or near
> 70th characters through the entire patch set.
> 

Will take care in v2. 

> >
> > Signed-off-by: Pankit Garg <pankit.garg at nxp.com>
> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> > ---
> >  include/configs/ls1046aqds.h | 9 +++++++++
> > include/configs/ls1046ardb.h | 7 +++++++
> >  2 files changed, 16 insertions(+)
> >
> > diff --git a/include/configs/ls1046aqds.h
> > b/include/configs/ls1046aqds.h index 765a21e00f..2a30cef0e4 100644
> > --- a/include/configs/ls1046aqds.h
> > +++ b/include/configs/ls1046aqds.h
> > @@ -432,6 +432,14 @@ unsigned long get_board_ddr_clk(void);  #define
> > CONFIG_CMDLINE_TAG
> >
> >  #undef CONFIG_BOOTCOMMAND
> > +#ifdef CONFIG_TFABOOT
> > +#define QSPI_NOR_BOOTCOMMAND		"sf probe && sf read
> $kernel_load "    \
> > +					"e0000 f00000 && bootm
> $kernel_load"
> > +#define IFC_NOR_BOOTCOMMAND		"cp.b $kernel_start
> $kernel_load "     \
> > +					"$kernel_size && bootm
> $kernel_load"
> > +#define SD_BOOTCOMMAND		"mmc info; mmc read
> $kernel_load"     \
> > +					"$kernel_addr_sd $kernel_size_sd
> && bootm $kernel_load"
> > +#else
> >  #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
> >  #define CONFIG_BOOTCOMMAND		"sf probe && sf read
> $kernel_load "    \
> >  					"e0000 f00000 && bootm
> $kernel_load"
> > @@ -439,6 +447,7 @@ unsigned long get_board_ddr_clk(void);
> >  #define CONFIG_BOOTCOMMAND		"cp.b $kernel_start
> $kernel_load "     \
> >  					"$kernel_size && bootm
> $kernel_load"
> >  #endif
> > +#endif
> >
> >  #include <asm/fsl_secure_boot.h>
> >
> > diff --git a/include/configs/ls1046ardb.h
> > b/include/configs/ls1046ardb.h index b8d9419b48..cc1f5f5f55 100644
> > --- a/include/configs/ls1046ardb.h
> > +++ b/include/configs/ls1046ardb.h
> > @@ -216,6 +216,12 @@
> >
> >  #ifndef SPL_NO_MISC
> >  #undef CONFIG_BOOTCOMMAND
> > +#ifdef CONFIG_TFABOOT
> > +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run
> qspi_bootcmd; "	\
> > +			   "env exists secureboot && esbc_halt;;"
> > +#define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "
> 	\
> > +			   "env exists secureboot && esbc_halt;"
> > +#else
> >  #if defined(CONFIG_QSPI_BOOT)
> >  #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run
> qspi_bootcmd; "	\
> >  			   "env exists secureboot && esbc_halt;;"
> > @@ -224,6 +230,7 @@
> >  			   "env exists secureboot && esbc_halt;"
> >  #endif
> >  #endif
> > +#endif
> >
> >  #include <asm/fsl_secure_boot.h>
> >
> >
> 
> Shouldn't this patch be put before patch #19? Did you compile each patch
> incrementally?

Will check this before sending v2. 

> 
> York