[U-Boot] [PATCH 05/20] arm: dts: MediaTek: add MT7623 Bananapi R2 board support

[Ryder Lee]

On Tue, 2018-10-02 at 15:10 +0200, Matthias Brugger wrote:
> 
> On 02/10/2018 08:13, Ryder Lee wrote:
> > This patch adds support for MT7623 development board - Bananapi R2 from
> > BIPAI KEJI.  Detailed hardware information for BPI-R2 which could be
> > found on http://wiki.banana-pi.org/Banana_Pi_BPI-R2.
> > 
> > Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
> > ---
> >  arch/arm/dts/Makefile                     |   1 +
> >  arch/arm/dts/mt7623.dtsi                  | 258 ++++++++++++++++++
> >  arch/arm/dts/mt7623n-bananapi-bpi-r2.dts  | 207 ++++++++++++++
> >  include/dt-bindings/clock/mt7623-clk.h    | 429 ++++++++++++++++++++++++++++++
> >  include/dt-bindings/power/mt7623-power.h  |  19 ++
> >  include/dt-bindings/reset/mt7623-resets.h |  85 ++++++
> >  6 files changed, 999 insertions(+)
> >  create mode 100644 arch/arm/dts/mt7623.dtsi
> >  create mode 100644 arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
> >  create mode 100644 include/dt-bindings/clock/mt7623-clk.h
> >  create mode 100644 include/dt-bindings/power/mt7623-power.h
> >  create mode 100644 include/dt-bindings/reset/mt7623-resets.h
> > 
> [...]
> > +/* INFRACFG */
> > +
> > +#define CLK_INFRA_DBG				0
> > +#define CLK_INFRA_SMI				1
> > +#define CLK_INFRA_QAXI_CM4			2
> > +#define CLK_INFRA_AUD_SPLIN_B			3
> > +#define CLK_INFRA_AUDIO				4
> > +#define CLK_INFRA_EFUSE				5
> > +#define CLK_INFRA_L2C_SRAM			6
> > +#define CLK_INFRA_M4U				7
> > +#define CLK_INFRA_CONNMCU			8
> > +#define CLK_INFRA_TRNG				9
> > +#define CLK_INFRA_RAMBUFIF			10
> > +#define CLK_INFRA_CPUM				11
> > +#define CLK_INFRA_KP				12
> > +#define CLK_INFRA_CEC				13
> > +#define CLK_INFRA_IRRX				14
> > +#define CLK_INFRA_PMICSPI			15
> > +#define CLK_INFRA_PMICWRAP			16
> > +#define CLK_INFRA_DDCCI				17
> > +#define CLK_INFRA_CPUSEL                        18
> 
> Tabs instead of spaces please :)

Sure, I will fix it. Thanks for catching that.

> Regards,
> Matthias