[U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT
Rajesh Bhagat
rajesh.bhagat at nxp.com
Wed Oct 3 11:37:03 UTC 2018
Defines BOOTCOMMAND for TFABOOT configuration for
supported boot sources.
Signed-off-by: Pankit Garg <pankit.garg at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
---
include/configs/ls1046aqds.h | 9 +++++++++
include/configs/ls1046ardb.h | 7 +++++++
2 files changed, 16 insertions(+)
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 765a21e00f..2a30cef0e4 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -432,6 +432,14 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMDLINE_TAG
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "sf probe && sf read $kernel_load " \
+ "e0000 f00000 && bootm $kernel_load"
+#define IFC_NOR_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
+ "$kernel_size && bootm $kernel_load"
+#define SD_BOOTCOMMAND "mmc info; mmc read $kernel_load" \
+ "$kernel_addr_sd $kernel_size_sd && bootm $kernel_load"
+#else
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
"e0000 f00000 && bootm $kernel_load"
@@ -439,6 +447,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
"$kernel_size && bootm $kernel_load"
#endif
+#endif
#include <asm/fsl_secure_boot.h>
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index b8d9419b48..cc1f5f5f55 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -216,6 +216,12 @@
#ifndef SPL_NO_MISC
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \
+ "env exists secureboot && esbc_halt;"
+#else
#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
"env exists secureboot && esbc_halt;;"
@@ -224,6 +230,7 @@
"env exists secureboot && esbc_halt;"
#endif
#endif
+#endif
#include <asm/fsl_secure_boot.h>
--
2.17.1
More information about the U-Boot
mailing list