[U-Boot] [PATCH 10/12] x86: tsc: Introduce config option for early timer frequency

[Bin Meng]

So far the TSC timer driver supports trying hardware calibration first
and using device tree as last resort for its running frequency as the
normal timer.

However when it is used as the early timer, it only supports hardware
calibration and if it fails, the driver just panics. This introduces
a new config option to specify the early timer frequency and it should
be equal to the value described in the device tree.

Without this patch, the travis-ci testing on QEMU x86_64 target fails
each time after it finishes the 'bootefi selftest' as the test.py see
an error was emitted on the console like this:

  TSC frequency is ZERO
  resetting ...
  ### ERROR ### Please RESET the board ###

It's strange that this error is consistently seen on the travis-ci
machine, but only occasionally seen on my local machine (maybe 1 out
of 10). Since QEMU x86_64 target enables BOOTSTAGE support which uses
early timer, with this fix it should work without any failure.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 drivers/timer/Kconfig     | 10 ++++++++++
 drivers/timer/tsc_timer.c | 10 ++++++----
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index 45a256a..f300f87 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -82,6 +82,16 @@ config X86_TSC_TIMER
 	help
 	  Select this to enable Time-Stamp Counter (TSC) timer for x86.
 
+config X86_TSC_TIMER_EARLY_FREQ
+	int "x86 TSC timer frequency when it is used as the early timer"
+	depends on X86_TSC_TIMER
+	default 1000000000
+	help
+	  Sets the TSC timer frequency when TSC is used as the ealy timer
+	  and the frequency can neither be calibrated via some hardware
+	  ways, nor got from device tree at the time when device tree is
+	  not available yet.
+
 config OMAP_TIMER
 	bool "Omap timer support"
 	depends on TIMER
diff --git a/drivers/timer/tsc_timer.c b/drivers/timer/tsc_timer.c
index 6473de2..5dc6f9e 100644
--- a/drivers/timer/tsc_timer.c
+++ b/drivers/timer/tsc_timer.c
@@ -341,7 +341,7 @@ static int tsc_timer_get_count(struct udevice *dev, u64 *count)
 	return 0;
 }
 
-static void tsc_timer_ensure_setup(bool stop)
+static void tsc_timer_ensure_setup(bool early)
 {
 	if (gd->arch.tsc_base)
 		return;
@@ -362,10 +362,12 @@ static void tsc_timer_ensure_setup(bool stop)
 		if (fast_calibrate)
 			goto done;
 
-		if (stop)
-			panic("TSC frequency is ZERO");
-		else
+		if (early) {
+			gd->arch.clock_rate = CONFIG_X86_TSC_TIMER_EARLY_FREQ;
+			return;
+		} else {
 			return;
+		}
 
 done:
 		gd->arch.clock_rate = fast_calibrate * 1000000;
-- 
2.7.4