[U-Boot] [PATCH 01/13] arm: stm32mp: Remove DM_FLAG_PRE_RELOC flag

[Bin Meng]

When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be
bound before relocation. However due to a bug in the DM core,
the flag only takes effect when devices are statically declared
via U_BOOT_DEVICE(). This bug has been fixed recently by commit
"dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in
lists_bind_fdt()", but with the fix, it has a side effect that
all existing drivers that declared DM_FLAG_PRE_RELOC flag will
be bound before relocation now. This may expose potential boot
failure on some boards due to insufficient memory during the
pre-relocation stage.

To mitigate this potential impact, the following changes are
implemented:

- Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver
  only supports configuration from device tree (OF_CONTROL)
- Keep DM_FLAG_PRE_RELOC flag in the driver only if the device
  is statically declared via U_BOOT_DEVICE()
- Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
  drivers that support both statically declared devices and
  configuration from device tree

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 arch/arm/mach-stm32mp/bsec.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c
index 0e152ef..d087a31 100644
--- a/arch/arm/mach-stm32mp/bsec.c
+++ b/arch/arm/mach-stm32mp/bsec.c
@@ -417,7 +417,6 @@ U_BOOT_DRIVER(stm32mp_bsec) = {
 	.ofdata_to_platdata = stm32mp_bsec_ofdata_to_platdata,
 	.platdata_auto_alloc_size = sizeof(struct stm32mp_bsec_platdata),
 	.ops = &stm32mp_bsec_ops,
-	.flags  = DM_FLAG_PRE_RELOC,
 };
 
 /* bsec IP is not present in device tee, manage IP address by platdata */
-- 
2.7.4