[U-Boot] [PATCH 1/3] arm64: versal: Add support for new Xilinx Versal ACAPs
Michal Simek
michal.simek at xilinx.com
Wed Oct 3 05:57:58 UTC 2018
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency.
The patch is adding necessary infrastructure in place without enabling
platform which is done in separate patch.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Kconfig | 2 +-
MAINTAINERS | 6 ++
arch/arm/Kconfig | 10 +++
arch/arm/Makefile | 1 +
arch/arm/mach-versal/Kconfig | 39 ++++++++++++
arch/arm/mach-versal/Makefile | 8 +++
arch/arm/mach-versal/clk.c | 30 +++++++++
arch/arm/mach-versal/cpu.c | 69 ++++++++++++++++++++
arch/arm/mach-versal/include/mach/gpio.h | 6 ++
arch/arm/mach-versal/include/mach/hardware.h | 34 ++++++++++
arch/arm/mach-versal/include/mach/sys_proto.h | 6 ++
board/xilinx/versal/MAINTAINERS | 7 +++
board/xilinx/versal/Makefile | 7 +++
board/xilinx/versal/board.c | 81 ++++++++++++++++++++++++
drivers/mmc/Kconfig | 2 +-
drivers/net/Kconfig | 2 +-
drivers/spi/Kconfig | 4 +-
env/Kconfig | 4 +-
include/configs/xilinx_versal.h | 91 +++++++++++++++++++++++++++
19 files changed, 402 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/mach-versal/Kconfig
create mode 100644 arch/arm/mach-versal/Makefile
create mode 100644 arch/arm/mach-versal/clk.c
create mode 100644 arch/arm/mach-versal/cpu.c
create mode 100644 arch/arm/mach-versal/include/mach/gpio.h
create mode 100644 arch/arm/mach-versal/include/mach/hardware.h
create mode 100644 arch/arm/mach-versal/include/mach/sys_proto.h
create mode 100644 board/xilinx/versal/MAINTAINERS
create mode 100644 board/xilinx/versal/Makefile
create mode 100644 board/xilinx/versal/board.c
create mode 100644 include/configs/xilinx_versal.h
diff --git a/Kconfig b/Kconfig
index d96e3373c198..b967d104355c 100644
--- a/Kconfig
+++ b/Kconfig
@@ -144,7 +144,7 @@ config SYS_MALLOC_F_LEN
config SYS_MALLOC_LEN
hex "Define memory for Dynamic allocation"
- depends on ARCH_ZYNQ
+ depends on ARCH_ZYNQ || ARCH_VERSAL
help
This defines memory to be allocated for Dynamic allocation
TODO: Use for other architectures
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f237128b241..d2645be8e0ac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -284,6 +284,12 @@ F: arch/arm/mach-uniphier/
F: configs/uniphier_*_defconfig
N: uniphier
+ARM VERSAL
+M: Michal Simek <michal.simek at xilinx.com>
+S: Maintained
+T: git git://git.denx.de/u-boot-microblaze.git
+F: arch/arm/mach-versal/
+
ARM ZYNQ
M: Michal Simek <monstr at monstr.eu>
S: Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8a23c76db846..0e5c4a385334 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -845,6 +845,14 @@ config ARCH_SUNXI
imply SPL_SERIAL_SUPPORT
imply USB_GADGET
+config ARCH_VERSAL
+ bool "Support Xilinx Versal Platform"
+ select ARM64
+ select CLK
+ select DM
+ select DM_SERIAL
+ select OF_CONTROL
+
config ARCH_VF610
bool "Freescale Vybrid"
select CPU_V7A
@@ -1440,6 +1448,8 @@ source "arch/arm/cpu/armv7/vf610/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
+source "arch/arm/mach-versal/Kconfig"
+
source "arch/arm/mach-zynqmp-r5/Kconfig"
source "arch/arm/cpu/armv7/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index cac58bdc4dc7..dcde05f772db 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -79,6 +79,7 @@ machine-$(CONFIG_ARCH_STM32MP) += stm32mp
machine-$(CONFIG_TEGRA) += tegra
machine-$(CONFIG_ARCH_UNIPHIER) += uniphier
machine-$(CONFIG_ARCH_ZYNQ) += zynq
+machine-$(CONFIG_ARCH_VERSAL) += versal
machine-$(CONFIG_ARCH_ZYNQMP_R5) += zynqmp-r5
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
diff --git a/arch/arm/mach-versal/Kconfig b/arch/arm/mach-versal/Kconfig
new file mode 100644
index 000000000000..04dbaea09c90
--- /dev/null
+++ b/arch/arm/mach-versal/Kconfig
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+if ARCH_VERSAL
+
+config SYS_BOARD
+ string "Board name"
+ default "versal"
+
+config SYS_VENDOR
+ string "Vendor name"
+ default "xilinx"
+
+config SYS_SOC
+ default "versal"
+
+config SYS_CONFIG_NAME
+ string "Board configuration name"
+ default "xilinx_versal"
+ help
+ This option contains information about board configuration name.
+ Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+ will be used for board configuration.
+
+config GICV3
+ def_bool y
+
+config SYS_MALLOC_LEN
+ default 0x2000000
+
+config COUNTER_FREQUENCY
+ int "Timer clock frequency"
+ default 0
+ help
+ Setup time clock frequency for certain platform
+
+config ZYNQ_SDHCI_MAX_FREQ
+ default 200000000
+
+endif
diff --git a/arch/arm/mach-versal/Makefile b/arch/arm/mach-versal/Makefile
new file mode 100644
index 000000000000..c230239320a2
--- /dev/null
+++ b/arch/arm/mach-versal/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 - 2018 Xilinx, Inc.
+# Michal Simek <michal.simek at xilinx.com>
+#
+
+obj-y += clk.o
+obj-y += cpu.o
diff --git a/arch/arm/mach-versal/clk.c b/arch/arm/mach-versal/clk.c
new file mode 100644
index 000000000000..b82cea4ccb6d
--- /dev/null
+++ b/arch/arm/mach-versal/clk.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 - 2018 Xilinx, Inc.
+ * Michal Simek <michal.simek at xilinx.com>
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CLOCKS
+/**
+ * set_cpu_clk_info - Initialize clock framework
+ *
+ * Return: 0 always.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+ gd->cpu_clk = get_tbclk();
+
+ gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+ gd->bd->bi_dsp_freq = 0;
+
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c
new file mode 100644
index 000000000000..959570eef6ed
--- /dev/null
+++ b/arch/arm/mach-versal/cpu.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 - 2018 Xilinx, Inc.
+ * Michal Simek <michal.simek at xilinx.com>
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+
+static struct mm_region versal_mem_map[] = {
+ {
+ .virt = 0x0UL,
+ .phys = 0x0UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0x80000000UL,
+ .phys = 0x80000000UL,
+ .size = 0x70000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ .virt = 0xf0000000UL,
+ .phys = 0xf0000000UL,
+ .size = 0x0fe00000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ .virt = 0xffe00000UL,
+ .phys = 0xffe00000UL,
+ .size = 0x00200000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0x400000000UL,
+ .phys = 0x400000000UL,
+ .size = 0x200000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ .virt = 0x600000000UL,
+ .phys = 0x600000000UL,
+ .size = 0x800000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0xe00000000UL,
+ .phys = 0xe00000000UL,
+ .size = 0xf200000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = versal_mem_map;
+
+u64 get_page_table_size(void)
+{
+ return 0x14000;
+}
diff --git a/arch/arm/mach-versal/include/mach/gpio.h b/arch/arm/mach-versal/include/mach/gpio.h
new file mode 100644
index 000000000000..677facba5efe
--- /dev/null
+++ b/arch/arm/mach-versal/include/mach/gpio.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+/* Empty file - for compilation */
diff --git a/arch/arm/mach-versal/include/mach/hardware.h b/arch/arm/mach-versal/include/mach/hardware.h
new file mode 100644
index 000000000000..aad742625b48
--- /dev/null
+++ b/arch/arm/mach-versal/include/mach/hardware.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+#define VERSAL_CRL_APB_BASEADDR 0xFF5E0000
+
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT BIT(25)
+
+#define IOU_SWITCH_CTRL_CLKACT_BIT BIT(25)
+#define IOU_SWITCH_CTRL_DIVISOR0_SHIFT 8
+
+struct crlapb_regs {
+ u32 reserved0[69];
+ u32 iou_switch_ctrl; /* 0x114 */
+ u32 reserved1[13];
+ u32 timestamp_ref_ctrl; /* 0x14c */
+ u32 reserved2[126];
+ u32 rst_timestamp; /* 0x348 */
+};
+
+#define crlapb_base ((struct crlapb_regs *)VERSAL_CRL_APB_BASEADDR)
+
+#define VERSAL_IOU_SCNTR_SECURE 0xFF140000
+
+#define IOU_SCNTRS_CONTROL_EN 1
+
+struct iou_scntrs_regs {
+ u32 counter_control_register; /* 0x0 */
+ u32 reserved0[7];
+ u32 base_frequency_id_register; /* 0x20 */
+};
+
+#define iou_scntr_secure ((struct iou_scntrs_regs *)VERSAL_IOU_SCNTR_SECURE)
diff --git a/arch/arm/mach-versal/include/mach/sys_proto.h b/arch/arm/mach-versal/include/mach/sys_proto.h
new file mode 100644
index 000000000000..677facba5efe
--- /dev/null
+++ b/arch/arm/mach-versal/include/mach/sys_proto.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - 2018 Xilinx, Inc.
+ */
+
+/* Empty file - for compilation */
diff --git a/board/xilinx/versal/MAINTAINERS b/board/xilinx/versal/MAINTAINERS
new file mode 100644
index 000000000000..2d2b80824538
--- /dev/null
+++ b/board/xilinx/versal/MAINTAINERS
@@ -0,0 +1,7 @@
+XILINX_VERSAL BOARDS
+M: Michal Simek <michal.simek at xilinx.com>
+S: Maintained
+F: arch/arm/dts/versal*
+F: board/xilinx/versal/
+F: include/configs/xilinx_versal*
+F: configs/xilinx_versal*
diff --git a/board/xilinx/versal/Makefile b/board/xilinx/versal/Makefile
new file mode 100644
index 000000000000..2b812765ee2f
--- /dev/null
+++ b/board/xilinx/versal/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2016 - 2018 Xilinx, Inc.
+# Michal Simek <michal.simek at xilinx.com>
+#
+
+obj-y := board.o
diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c
new file mode 100644
index 000000000000..2b3a40b73a5f
--- /dev/null
+++ b/board/xilinx/versal/board.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 - 2018 Xilinx, Inc.
+ * Michal Simek <michal.simek at xilinx.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ printf("EL Level:\tEL%d\n", current_el());
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ if (current_el() == 3) {
+ u32 val;
+
+ writel(IOU_SWITCH_CTRL_CLKACT_BIT |
+ (0x20 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT),
+ &crlapb_base->iou_switch_ctrl);
+
+ /* Global timer init - Program time stamp reference clk */
+ val = readl(&crlapb_base->timestamp_ref_ctrl);
+ val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT;
+ writel(val, &crlapb_base->timestamp_ref_ctrl);
+
+ debug("ref ctrl 0x%x\n",
+ readl(&crlapb_base->timestamp_ref_ctrl));
+
+ /* Clear reset of timestamp reg */
+ writel(0, &crlapb_base->rst_timestamp);
+
+ /*
+ * Program freq register in System counter and
+ * enable system counter.
+ */
+ writel(COUNTER_FREQUENCY,
+ &iou_scntr_secure->base_frequency_id_register);
+
+ debug("counter val 0x%x\n",
+ readl(&iou_scntr_secure->base_frequency_id_register));
+
+ writel(IOU_SCNTRS_CONTROL_EN,
+ &iou_scntr_secure->counter_control_register);
+
+ debug("scntrs control 0x%x\n",
+ readl(&iou_scntr_secure->counter_control_register));
+ debug("timer 0x%llx\n", get_ticks());
+ debug("timer 0x%llx\n", get_ticks());
+ }
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ if (fdtdec_setup_mem_size_base() != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 377b1c4b3b0a..a11546e2eb09 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -516,7 +516,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_ZYNQ
bool "Arasan SDHCI controller support"
- depends on ARCH_ZYNQ || ARCH_ZYNQMP
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
depends on DM_MMC && OF_CONTROL && BLK
depends on MMC_SDHCI
help
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5441da47d13e..f1f0e2d94ef1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -344,7 +344,7 @@ config XILINX_EMACLITE
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config ZYNQ_GEM
- depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
+ depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
select PHYLIB
bool "Xilinx Ethernet GEM"
help
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index dcd719ff0ac6..85d3d3e97b9c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -220,7 +220,7 @@ config XILINX_SPI
config ZYNQ_SPI
bool "Zynq SPI driver"
- depends on ARCH_ZYNQ || ARCH_ZYNQMP
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_ZYNQ3
help
Enable the Zynq SPI driver. This driver can be used to
access the SPI NOR flash on platforms embedding this Zynq
@@ -237,7 +237,7 @@ config ZYNQ_QSPI
config ZYNQMP_GQSPI
bool "Configure ZynqMP Generic QSPI"
- depends on ARCH_ZYNQMP
+ depends on ARCH_ZYNQMP || ARCH_ZYNQ3
help
This option is used to enable ZynqMP QSPI controller driver which
is used to communicate with qspi flash devices.
diff --git a/env/Kconfig b/env/Kconfig
index f23be00a547f..9011109b47b7 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -431,7 +431,7 @@ config ENV_EXT4_FILE
It's a string of the EXT4 file name. This file use to store the
environment (explicit path to the file)
-if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP
+if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
config ENV_OFFSET
hex "Environment Offset"
@@ -448,7 +448,7 @@ config ENV_SIZE
hex "Environment Size"
default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ
- default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP
+ default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP || ARCH_VERSAL
help
Size of the environment storage area
diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h
new file mode 100644
index 000000000000..bfe4c43449ac
--- /dev/null
+++ b/include/configs/xilinx_versal.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Xilinx Versal
+ * (C) Copyright 2016 - 2018 Xilinx, Inc.
+ * Michal Simek <michal.simek at xilinx.com>
+ *
+ * Based on Configuration for Xilinx ZynqMP
+ */
+
+#ifndef __XILINX_VERSAL_H
+#define __XILINX_VERSAL_H
+
+#define CONFIG_REMAKE_ELF
+
+/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0xF9000000
+#define GICR_BASE 0xF9080000
+
+#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
+
+#define CONFIG_SYS_MEMTEST_START 0
+#define CONFIG_SYS_MEMTEST_END 1000
+
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
+
+/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
+#if CONFIG_COUNTER_FREQUENCY
+# define COUNTER_FREQUENCY CONFIG_COUNTER_FREQUENCY
+#endif
+
+/* Serial setup */
+#define CONFIG_ARM_DCC
+#define CONFIG_CPU_ARMV8
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ { 4800, 9600, 19200, 38400, 57600, 115200 }
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_MAY_FAIL
+
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE 4096
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR 0x8000000
+
+/* Monitor Command Prompt */
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 2048
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS 64
+
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM)
+# define CONFIG_NET_MULTI
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define PHY_ANEG_TIMEOUT 20000
+#endif
+
+#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
+
+#define CONFIG_CLOCKS
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "fdt_high=10000000\0" \
+ "initrd_high=10000000\0" \
+ "fdt_addr_r=0x40000000\0" \
+ "pxefile_addr_r=0x10000000\0" \
+ "kernel_addr_r=0x18000000\0" \
+ "scriptaddr=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0"
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ ENV_MEM_LAYOUT_SETTINGS \
+ BOOTENV
+#endif
+
+#endif /* __XILINX_VERSAL_H */
--
1.9.1
More information about the U-Boot
mailing list