[U-Boot] [RESEND PATCH v3 20/26] armv8: ls1046ardb: Add TFABOOT support

Rajesh Bhagat rajesh.bhagat at nxp.com
Tue Oct 9 13:18:40 UTC 2018


TFABOOT support includes:
 - ls1046ardb_tfa_defconfig to be loaded by trusted firmware
 - environment address and size changes for TFABOOT
 - FMAN address changes for TFABOOT
 - define BOOTCOMMAND for TFABOOT

Signed-off-by: York Sun <york.sun at nxp.com>
Signed-off-by: Pankit Garg <pankit.garg at nxp.com>
Signed-off-by: Vinitha V Pillai <vinitha.pillai at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
---
Change in v3:                                                                   
 - Removed TFABOOT generic code
 - Added ls1046ardb_tfa_SECURE_BOOT_defconfig

Change in v2:                                                                   
 - Merged ls1046ardb TFA boot support patches                                   
 - Removed extra CONFIG_TFABOOT flag usage 

 board/freescale/ls1046ardb/ddr.c             | 12 +++++
 configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 52 ++++++++++++++++++++
 configs/ls1046ardb_tfa_defconfig             | 49 ++++++++++++++++++
 include/configs/ls1046a_common.h             | 12 +++++
 include/configs/ls1046ardb.h                 | 15 ++++++
 5 files changed, 140 insertions(+)
 create mode 100644 configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
 create mode 100644 configs/ls1046ardb_tfa_defconfig

diff --git a/board/freescale/ls1046ardb/ddr.c b/board/freescale/ls1046ardb/ddr.c
index 82b1b1d9ea..321222d68d 100644
--- a/board/freescale/ls1046ardb/ddr.c
+++ b/board/freescale/ls1046ardb/ddr.c
@@ -97,6 +97,17 @@ found:
 	popts->cpo_sample = 0x61;
 }
 
+#ifdef CONFIG_TFABOOT
+int fsl_initdram(void)
+{
+	gd->ram_size = tfa_get_dram_size();
+
+	if (!gd->ram_size)
+		gd->ram_size = fsl_ddr_sdram_size();
+
+	return 0;
+}
+#else
 int fsl_initdram(void)
 {
 	phys_size_t dram_size;
@@ -117,3 +128,4 @@ int fsl_initdram(void)
 
 	return 0;
 }
+#endif
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
new file mode 100644
index 0000000000..8102d13d7d
--- /dev/null
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -0,0 +1,52 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SECURE_BOOT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_TFABOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_MISC_INIT_R=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_PHYLIB=y
+CONFIG_NETDEVICES=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_USB=y
+CONFIG_FSL_QSPI=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_RSA=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
new file mode 100644
index 0000000000..5bc80ed24e
--- /dev/null
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -0,0 +1,49 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index cdb73f644a..6e36c9339b 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -33,7 +33,11 @@
 #include <asm/arch/stream_id_lsch2.h>
 
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -165,6 +169,13 @@
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
 #endif
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FMAN_FW_ADDR		0x900000
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		1000000
+#define CONFIG_ENV_SPI_MODE		0x03
+#else
 #ifdef CONFIG_SD_BOOT
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
@@ -187,6 +198,7 @@
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
 #endif
+#endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index ffca410b1a..cc1f5f5f55 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -160,6 +160,13 @@
 #define CONFIG_ENV_OVERWRITE
 #endif
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_ENV_SIZE			0x2000		/* 8KB */
+#define CONFIG_ENV_OFFSET		0x500000	/* 5MB */
+#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
+#else
 #if defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
@@ -169,6 +176,7 @@
 #define CONFIG_ENV_OFFSET		0x300000	/* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
 #endif
+#endif
 
 #define AQR105_IRQ_MASK			0x80000000
 /* FMan */
@@ -208,6 +216,12 @@
 
 #ifndef SPL_NO_MISC
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
 			   "env exists secureboot && esbc_halt;;"
@@ -216,6 +230,7 @@
 			   "env exists secureboot && esbc_halt;"
 #endif
 #endif
+#endif
 
 #include <asm/fsl_secure_boot.h>
 
-- 
2.17.1



More information about the U-Boot mailing list