[U-Boot] [PATCH 4/4] sunxi: Add defconfig for the BananaPi with BL035 LCD module

[Paul Kocialkowski]

This introduces a new defconfig for the BananaPi, which includes support
for the BL035 LCD module distributed by Lemaker for use with this board.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 configs/Bananapi_LCD_BL035_defconfig | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 configs/Bananapi_LCD_BL035_defconfig

diff --git a/configs/Bananapi_LCD_BL035_defconfig b/configs/Bananapi_LCD_BL035_defconfig
new file mode 100644
index 0000000000..b0a8fb9099
--- /dev/null
+++ b/configs/Bananapi_LCD_BL035_defconfig
@@ -0,0 +1,29 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
+CONFIG_VIDEO_COMPOSITE=y
+CONFIG_VIDEO_LCD_MODE="x:320,y:240,depth:24,pclk_khz:7000,le:38,ri:20,up:15,lo:4,hs:30,vs:3,sync:0,vmode:0"
+CONFIG_VIDEO_LCD_DE_LOW=y
+CONFIG_VIDEO_LCD_POWER="PH12"
+CONFIG_VIDEO_LCD_BL_EN="PH8"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
+# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
+CONFIG_GMAC_TX_DELAY=3
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_NETCONSOLE=y
+CONFIG_SCSI_AHCI=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_SCSI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-- 
2.19.0