[U-Boot] [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value

[Poonam Aggrwal]

> -----Original Message-----
> From: Bin Meng [mailto:bmeng.cn at gmail.com]
> Sent: Monday, October 22, 2018 7:41 AM
> To: York Sun <york.sun at nxp.com>
> Cc: Poonam Aggrwal <poonam.aggrwal at nxp.com>; U-Boot Mailing List <u-
> boot at lists.denx.de>
> Subject: Re: [PATCH 1/2] powerpc: t1040: Correct RCW MAC2_GMII_SEL value
> 
> On Mon, Oct 15, 2018 at 1:21 PM Bin Meng <bmeng.cn at gmail.com> wrote:
> >
> > On Mon, Oct 8, 2018 at 11:07 PM York Sun <york.sun at nxp.com> wrote:
> > >
> > > On 10/08/2018 06:51 AM, Bin Meng wrote:
> > > > Per T1040RM (Rev. 1, 08/2015), the value of
> > > > FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT is wrong and
> should be
> > > > 0x00000080 (bit 440 in the RCW).
> > > >
> > > > Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> > > > ---
> > >
> > >
> > > Poonam,
> > >
> > > Please review and confirm on T1040. Thanks.
> > >
> >
> > Ping ?
> 
> Ping ?
Apologies Bin, York for such late response....
The patch looks correct, the value of FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT should be 0x80 indeed,
I would suggest that I test it once that DTSEC2 RGMII works with this change, because I see more changes which could be required in drivers/fm/t1040.c...seems a goof up there as well.

Kind Regards
Poonam