[U-Boot] [PATCH v2 0/9] Add pinmux command
Patrice CHOTARD
patrice.chotard at st.com
Tue Oct 9 13:17:19 UTC 2018
Hi Simon
On 10/04/2018 03:13 AM, Simon Glass wrote:
> Hi Patrice,
>
> On 1 October 2018 at 05:59, Patrice Chotard <patrice.chotard at st.com> wrote:
>>
>> For debug purpose, it's useful to know the pins muxing
>> to check if a pin is configured as a GPIO or as an alternate
>> function and to get information about this alternate function
>> configuration. For this purpose a new command pinmux is implemented.
>>
>> This series adds:
>> - Add get_pin_muxing ops to UCLASS pinctrl
>> - Add pinmux command
>> - Add get_function() support to stm32 gpio driver
>> - Add get_pins_count() support to stm32 pinctrl driver
>> - Add get_pin_name() support to stm32 pinctrl driver
>> - Add get_pin_muxing() support to stm32 pinctrl driver
>>
>> Changes in v2:
>> - Replace pinmux_show ops which displayed the complete pin-controller
>> muxing by get_pin_muxing ops which displays the muxing of one pin
>> - In order to make pin muxing display less SoC specific,
>> use pinctrl_pins_count(), pinctrl_get_pin_name() and
>> pinctrl_get_pin_muxing() methods instead of
>> previous pinctrl_pinmux_show() method.
>
> This looks good to me. The only think I don't like is using static
> char for the string.
>
> Can we instead pass
>
> char *buf, int size
>
> to each method and have it snprintf() the text directly into that
> buffer? The methods can then return 0 if all is well, -ve on error.
Ok, i will update this part
Thanks
Patrice
>
> Regards,
> Simon
>
More information about the U-Boot
mailing list