[U-Boot] [PATCH v2 1/3] efi_loader: rework fdt handling in distro boot script

Alexander Graf agraf at suse.de
Mon Oct 22 07:42:32 UTC 2018



On 22.10.18 08:22, AKASHI Takahiro wrote:
> On Mon, Oct 22, 2018 at 01:40:05PM +0900, AKASHI Takahiro wrote:
>> The current scenario for default UEFI booting, scan_dev_for_efi, has
>> several issues:
>> * load dtb dynamically even if its loacation (device) is not the same
>>   as BOOTEFI_NAME binary's, (reported by Alex)
>> * invoke 'bootmgr' only if BOOTEFI_NAME binary does exit even though
>>   'bootmgr' can and should work independently whether or not the binary
>>   exist,
>> * in addition, invoke 'bootmgr' with dynamically-loaded dtb.
>>   This behavior is not expected. (reported by Alex)
>> * always assume that a 'fdtfile' variable is defined,
>>   ("test -e ${devtype} ${devnum}:${distro_bootpart} "${prefix}${efi_fdtfile}"
>>   always returns true even if fdtfile is NULL with prefix=="/".)
>> * redundantly check for 'fdt_addr_r' in boot_efi_binary
>>
>> In this patch, all the issues above are sorted out.
>> Please note that the default behavior can be customized with:
>> 	fdtfile: a dtb file name
>> 	efi_dtb_prefixes: a list of paths for searching for a dtb file
>>
>> (this feature does work even without this patch.)
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
>> ---
>>  include/config_distro_bootcmd.h | 38 +++++++++++++++++----------------
>>  1 file changed, 20 insertions(+), 18 deletions(-)
>>
>> diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
>> index 373fee78a999..256698309eb9 100644
>> --- a/include/config_distro_bootcmd.h
>> +++ b/include/config_distro_bootcmd.h
>> @@ -115,7 +115,7 @@
>>   */
>>  #define BOOTENV_EFI_SET_FDTFILE_FALLBACK                                  \
>>  	"if test -z \"${fdtfile}\" -a -n \"${soc}\"; then "               \
>> -	  "setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; "           \
>> +	  "efi_fdtfile=${soc}-${board}${boardver}.dtb; "           \
>>  	"fi; "
>>  #else
>>  #define BOOTENV_EFI_SET_FDTFILE_FALLBACK
>> @@ -124,26 +124,20 @@
>>  
>>  #define BOOTENV_SHARED_EFI                                                \
>>  	"boot_efi_binary="                                                \
>> -		"if fdt addr ${fdt_addr_r}; then "                        \
>> -			"bootefi bootmgr ${fdt_addr_r};"                  \
>> -		"else "                                                   \
>> -			"bootefi bootmgr ${fdtcontroladdr};"              \
>> -		"fi;"                                                     \
>>  		"load ${devtype} ${devnum}:${distro_bootpart} "           \
>>  			"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; "      \
>> -		"if fdt addr ${fdt_addr_r}; then "                        \
>> -			"bootefi ${kernel_addr_r} ${fdt_addr_r};"         \
>> -		"else "                                                   \
>> -			"bootefi ${kernel_addr_r} ${fdtcontroladdr};"     \
>> -		"fi\0"                                                    \
>> +		"bootefi ${kernel_addr_r} ${efi_fdt_addr};\0"		  \
>>  	\
>>  	"load_efi_dtb="                                                   \
>> -		"load ${devtype} ${devnum}:${distro_bootpart} "           \
>> -			"${fdt_addr_r} ${prefix}${efi_fdtfile}\0"         \
>> +		"load ${devtype} ${devnum}:${distro_bootpart} "		  \
>> +			"${fdt_addr_r} ${prefix}${efi_fdtfile}; "	  \
>> +		"if fdt addr ${fdt_addr_r}; then "			  \
>> +			"efi_fdt_addr=${fdt_addr_r}; "			  \
>> +		"fi;\0"							  \
>>  	\
>>  	"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0"                        \
>> -	"scan_dev_for_efi="                                               \
>> -		"setenv efi_fdtfile ${fdtfile}; "                         \
>> +	"set_efi_fdt_addr="						  \
>> +		"efi_fdtfile=${fdtfile}; "                         \
>>  		BOOTENV_EFI_SET_FDTFILE_FALLBACK                          \
>>  		"for prefix in ${efi_dtb_prefixes}; do "                  \
>>  			"if test -e ${devtype} "                          \
>> @@ -151,19 +145,26 @@
>>  					"${prefix}${efi_fdtfile}; then "  \
>>  				"run load_efi_dtb; "                      \
>>  			"fi;"                                             \
>> -		"done;"                                                   \
>> +		"done;\0"                                                   \
>> +	\
>> +	"scan_dev_for_efi="                                               \
>>  		"if test -e ${devtype} ${devnum}:${distro_bootpart} "     \
>>  					"efi/boot/"BOOTEFI_NAME"; then "  \
>>  				"echo Found EFI removable media binary "  \
>>  					"efi/boot/"BOOTEFI_NAME"; "       \
>> +				"efi_fdt_addr=${fdtcontroladdr}; "	  \
>> +				"if test -n \"${fdtfile}\"; then "	  \
>> +					"run set_efi_fdt_addr; "	  \
>> +				"fi; "					  \
>>  				"run boot_efi_binary; "                   \
>>  				"echo EFI LOAD FAILED: continuing...; "   \
>> -		"fi; "                                                    \
>> -		"setenv efi_fdtfile\0"
>> +		"fi;\0"
>>  #define SCAN_DEV_FOR_EFI "run scan_dev_for_efi;"
>> +#define BOOT_EFI_BOOT_MANAGER "bootefi bootmgr;"
>>  #else
>>  #define BOOTENV_SHARED_EFI
>>  #define SCAN_DEV_FOR_EFI
>> +#define BOOT_EFI_BOOT_MANAGER
>>  #endif
>>  
>>  #ifdef CONFIG_SATA
>> @@ -409,6 +410,7 @@
>>  	BOOT_TARGET_DEVICES(BOOTENV_DEV)                                  \
>>  	\
>>  	"distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT                      \
>> +		BOOT_EFI_BOOT_MANAGER					  \
> 
> The last-minute change may have introduced a problem.
> By moving "bootmgr" from scan_dev_for_efi" to here,
> grub fails to start a grub.cfg menu, saying
>   "error: no such device: /.disk/info."
> 
> Do you have any ideas?

I would guess that bootmgr doesn't set the loaded image target correctly
and before it just happened to work because there was a load command
before the bootmgr command?

https://github.com/u-boot/u-boot/blob/master/cmd/fs.c#L26


Alex


More information about the U-Boot mailing list